LPI 102-500 - LPIC-1 Exam 102, Part 2 of 2, version 5.0

The tool that reports not only the response from the name server but also details about the query is dig. Dig stands for domain information groper and it is a command-line tool that can query DNS servers for various types of records. Dig can also provide additional information such as the query time, the server address, the query options, and the response code. Dig is a powerful and flexible tool that can be used for DNS troubleshooting and testing123 References:

1: How to use the dig command - Linux.com

2: dig(1) - Linux manual page - man7.org

3: Top 6 Tools for DNS Troubleshooting | Total Uptime®

The statement hosts: files dns is valid in the file /etc/nsswitch.conf. It means that the system will use the local /etc/hosts file and the Domain Name System (DNS) to resolve host names to IP addresses. The order of the sources on the line determines the order in which they will be queried. In this case, the system will first check the /etc/hosts file for a matching host name, and if not found, it will query the DNS servers configured in /etc/resolv.conf. The other statements in the question are not valid in the /etc/nsswitch.conf file. The statement multi on is not a valid keyword or source for any database. The statement 192.168.168.4 dns-server is not a valid syntax for specifying a source or an action. The statement include /etc/nsswitch.d/ is not a valid way to include another file or directory in the /etc/nsswitch.conf file. References:

[LPI Linux Administrator - Exam 102 Objectives - Topic 109: Networking Fundamentals]

nsswitch.conf(5) - Linux manual page

What is the /etc/nsswitch.conf file in Linux – TecAdmin

The routing table shows how the kernel will route packets to different destinations based on the destination IP address, the gateway, the netmask, the flags, the metric, and the interface. The kernel will try to find the most specific route that matches the destination IP address, which means the route with the longest netmask. If there are multiple routes with the same netmask, the kernel will use the route with the lowest metric. If there is no matching route, the kernel will use the default route, which is the route with the destination 0.0.0.0.

In this case, the destination IP address is 192.168.2.150, which belongs to the network 192.168.2.0/24. The routing table has a specific route for this network, which is the second entry. The gateway for this route is 0.0.0.0, which means that the packet will be directly transmitted on the interface eth0, without passing through any router. The netmask for this route is 255.255.255.0, which means that the network has 256 possible hosts. The flags for this route are U, which means that the route is up, and G, which means that the route is to a gateway. The metric for this route is 0, which means that it has the highest priority. Therefore, the kernel will use this route to handle the outgoing packet to the destination 192.168.2.150.

References:

How To Display Routing Table In Linux - RootUsers

route command in Linux with Examples - GeeksforGeeks

Understand the basics of Linux routing | TechRepublic

 The keywords dns and files can be used in the /etc/nsswitch.conf file to specify a source for host name lookups. The keyword dns means that the system will use the Domain Name System (DNS) to resolve host names to IP addresses. The keyword files means that the system will use the local /etc/hosts file to resolve host names to IP addresses. The order of the keywords on the line determines the order in which the sources will be queried. For example, the following line in /etc/nsswitch.conf:

hosts: files dns

means that the system will first check the /etc/hosts file for a matching host name, and if not found, it will query the DNS servers configured in /etc/resolv.conf. The other keywords in the question are not valid for the hosts database. The keyword resolv is used for the services database, which contains network service names and port numbers. The keyword remote is not a standard keyword, but it may be used by some applications to implement their own name service providers. The keyword hosts is the name of the database itself, not a source for it. References:

[LPI Linux Administrator - Exam 102 Objectives - Topic 109: Networking Fundamentals]

nsswitch.conf(5) - Linux manual page

What is the /etc/nsswitch.conf file in Linux – TecAdmin

Port 23 is the well known port for the telnet service, which is a remote connection tool similar to SSH, but without the security of SSH. It uses a client/server model - a telnet client connects to a telnet server using TCP port 23. Due to lack of security, usage of telnet is discouraged in most situations, and firewalls routinely block port 23 to prevent incoming telnet connections. Port 23 is part of the topic 109.1: Fundamentals of internet protocols, which is one of the objectives of the LPI Linux Administrator - 102 exam12. References: 1: https://learning.lpi.org/en/learning-materials/102-500/  2: https://www.lpi.org/our-certifications/exam-102-objectives/

The file /etc/resolv.conf is the configuration file for the DNS resolver, which translates domain names to IP addresses by querying the DNS servers. The file supports several keywords that provide various types of resolver information. Two of the keywords that can be used in /etc/resolv.conf are:

nameserver: This keyword specifies the IP address of the DNS server that the resolver can query against. Up to three nameservers can be configured, and the resolver will try them in order until one responds or all fail.

search: This keyword specifies a list of search domains that the resolver will append to the domain name when performing a query. For example, if the search list is example.com example.net, and the resolver queries for host, it will try host.example.com and host.example.net in order. The search list can have up to six domains, with a maximum of 256 characters in total.

The other keywords in the question are not valid for /etc/resolv.conf. The file does not support any keywords for substitution, lookup, or method. However, there are other keywords that can be used, such as:

domain: This keyword specifies the local domain name of the system. It is mutually exclusive with the search keyword, and only one instance of either can be used.

options: This keyword specifies various options that modify the behavior of the resolver. For example, the option rotate can be used to rotate the nameservers in a round-robin fashion, instead of trying them in order. Multiple options can be specified, separated by spaces.

References:

3: The /etc/resolv.conf File | Baeldung on Linux

1: /etc/resolv.conf - QNX

4: Chapter 33. Manually configuring the /etc/resolv.conf file

The commands that can be used to display the local routing table are netstat and route. Both commands can show the kernel routing tables, which contain information about the network destinations and the gateways to reach them. The netstat command can be used with the -r option to display the routing table, and the -n option to show numeric addresses only. The route command can also be used with the -n option to display the routing table without resolving names. However, both netstat and route are considered obsolete and have been replaced by the ip route command, which is the current recommended way of printing the routing table in Linux12. References:

1: Understanding Routing Table - nixCraft

2: How To Display Routing Table In Linux - RootUsers

3: linux networking - What is the local routing table used for? - Server Fault

 The command ifconfig can be used to set a network interface active or inactive by using the up or down options. For example, the following command will activate the eth0 interface:

sudo ifconfig eth0 up

The command ifconfig can also be used to change the netmask used on a network interface by specifying the netmask option followed by the desired netmask value. For example, the following command will change the netmask of the eth0 interface to 255.255.255.0:

sudo ifconfig eth0 netmask 255.255.255.0

The other options in the question are not possible with the ifconfig command. The command ifconfig cannot specify the kernel module to be used with a network interface. This is done by the modprobe command or the /etc/modules file. The command ifconfig cannot allow regular users to change the network configuration of a network interface. This is controlled by the sudoers file or the polkit framework. The command ifconfig cannot specify which network services are available on a network interface. This is done by the firewall rules or the /etc/services file. References:

[LPI Linux Administrator - Exam 102 Objectives - Topic 109: Networking Fundamentals]

Linux ifconfig Command | Linuxize

15 Useful “ifconfig” Commands to Configure Network in Linux - Tecmint

ifconfig command in Linux with Examples - GeeksforGeeks

The command that can be used to investigate the properties for a particular window in X by clicking that window is xwininfo. xwininfo is a command-line tool that provides information about X windows. When executed, it opens a small window and waits for the user to select a window by clicking on it. Then, it displays various characteristics about the window in question, such as its geometry, position, size, depth, class, name, id, and more. xwininfo is part of the X Window System, which is a graphical user interface system for Unix-like operating systems. xwininfo can be useful for debugging, testing, or scripting purposes. References: https://bing.com/search?q=command+to+investigate+properties+of+a+window+in+X

https://www.exam-answer.com/linux-foundation-certified-system-administrator-lfcs-simulation-investigate-window-properties

 The file that specifies the default wallpaper for XDM is /etc/X11/xdm/Xsetup. XDM is a display manager for the X Window System that provides a graphical login screen and manages user sessions. The /etc/X11/xdm/Xsetup file is executed when XDM starts the X server and before any user login or session starts. This file can be used to configure the X server, set X resources, and perform any other system-wide setup tasks, such as setting the wallpaper. To set the wallpaper, one can use a command like qiv -z /usr/local/share/backgrounds/wallpaper.jpg in the /etc/X11/xdm/Xsetup file, where qiv is an image viewer and /usr/local/share/backgrounds/wallpaper.jpg is the path to the desired wallpaper image1.

The other options are not correct/etc/X11/xdm.conf is the configuration file for XDM, which specifies how XDM should behave, such as the access control, the login window, and the session types2/etc/X11/xdm/Defaults is the directory where the default XDM configuration files are stored, such as Xresources, Xsession, and Xwilling2. /etc/X11/defaults.conf is not a valid file or directory related to XDM or X Window System. References:

XDM - ArchWiki

Configuring XDM - Linux Documentation Project