Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

Brocade 150-820 - Brocade Certified Ethernet Fabric Professional 2015

Page: 2 / 6
Total 182 questions

You have connectivity from a top of rack Brocade VDX 6740 to two Brocade VDX 8770s in the core. Ports 1-16 are connected to one VDX 8770, and ports 49-52 are connected to the other VDX 8770 in break out mode.

Which two statements about the VDX 6740 in this scenario are true? (Choose two.)

A.

The 10 GbE ports are comprised of two port groups of 8 ports each.

B.

The 10 GbE ports are comprised of a single port group of 16 ports.

C.

The ports in break out mode are comprised of two port groups of 8 ports each.

D.

The ports in break out mode are comprised of a single port group of 16 ports.

You need to deploy several FCoE initiators connected through a Brocade VDX 6730. You are required to add the VDX 6730 to an existing FC SAN without increasing the number of domains.

Which action is required?

A.

Configure the LSAN zones on the VDX 6730.

B.

Configure the VDX 6730 in Access Gateway mode.

C.

Configure the VDX 6730 in VCS Logical Chassis mode.

D.

Configure the VDX 6730 in stand-alone mode.

A customer would like to increase the bandwidth to servers connected to a Brocade VCS Fabric. Two 10 Gbps NICs to the server were teamed, but now there is no IP connectivity to the Brocade VDX 6740.

Which two switch changes, depending upon the hypervisor platform, should be used to correct the 20 Gbps connection to the server? (Choose two.)

A.

Create a two link port channel as an access port.

B.

Create two access ports and use the fabric trunk enable command.

C.

Enable LACP on both 10 GbE interfaces.

D.

Create a two link port channel as a trunk port.

Your Brocade VCS Fabric consists of two Brocade VDX 8770s and 10 Brocade VDX 6740s. The current fabric is running in VCS fabric mode. You need to add a VLAN on one switch and have it distributed to all other switches in the fabric.

Which feature is required to accomplish this task?

A.

Auto Migrating Port Profile

B.

PVST+

C.

logical chassis mode

D.

priority flow control

Exhibit:

VDX11# show vcs detail

Config Mode : Distributed

VCS ID : 10

Total Number of Nodes : 3

Node :1

Serial Number : BWW2535G00E

Condition : Good

Status : Co-ordinator

VCS Id : 10

Rbridge-Id : 10

Co-ordinator : YES

WWN : 10:00:00:05:33:91:3D:F4

Switch MAC : 00:05:33:91:3D:F4

FCF MAC : 0C:B3:1E:F8:0C:B3

Internal IP : 127.1.0.10

Management IP : 10.255.248.24

Exhibit:

Referring to the exhibit, in which mode of operation is the active switch participating?

A.

VCS fabric mode

B.

standalone mode

C.

logical chassis mode

D.

local only mode

Your data center will include a Brocade VCS Fabric that has a Brocade VDX 8770-4 for access/aggregation and a VDX 8770-8 at the core. You must ensure that both chassis are assembled for highest availability. You have a total of four SFMs to deploy in the two chassis.

Which slot combinations provide the expected results?

A.

VDX 8770-4 slots 1, 2 and VDX 8770-8 slots 1, 2

B.

VDX 8770-4 slots 1, 2 and VDX 8770-8 slots 3, 4

C.

VDX 8770-4 slots 2, 3 and VDX 8770-8 slots 3, 4

D.

VDX 8770-4 slots 2, 3 and VDX 8770-8 slots 5, 6

You want to protect your Brocade VCS Fabric from excessive multicast traffic.

Which two features would you enable? (Choose two.)

A.

BUM Storm Control on the VDX 6730

B.

BUM Storm Control on the VDX 8770

C.

Multicast Rate Limiting on the VDX 6730

D.

Multicast Rate Limiting on the VDX 8770

You want to create trunks with your existing 40 GbE ISL connections between two Brocade VDX 8770s using NOS 4.1.1. The two VDX 8770s are not forming a trunk as expected.

VDX8770# sh fab isl

Rbridge-id: 131 #ISLs: 2

Src Src Nbr Nbr

Index Interface Index Interface Nbr-WWN BW Trunk Nbr-Name

----------------------------------------------------------------------------------------------

13 Fo 131/2/1 8 Fo 132/2/1 10:00:00:05:33:D4:0C:CE 40G Yes "sw-0"

15 Fo 131/2/2 45 Fo 132/2/2 10:00:00:05:33:D4:0C:CE 40G Yes "sw-0"

Referring to the exhibit, which two steps are required? (Choose two.)

A.

Change the port group configuration.

B.

Change the QSFP optics to breakout optics.

C.

Change the optical cables to breakout cables.

D.

Change the connector configurations.

Your customer wants to establish a LAG connection on a Brocade VDX 6740T-1G connecting to another vendor's switch using 1 GbE interfaces. Every time they try to enable the port channel, the interfaces shut down.

In this situation, which statement is true?

A.

The speed needs to be set on the port channel.

B.

LACP needs to be turned on the port channel.

C.

The channel group needs to be set to mode on for the physical interfaces when connecting to another vendor.

D.

Gigabit interfaces will not form LAGs.

You see a large number of alerts in Brocade Network Advisor on a Brocade VDX switch. You are asked to gather information to send to technical support for analysis.

What information should you send? (Choose three.)

A.

copy support output before clearing error counters

B.

show running config output

C.

a fabric topology drawing

D.

copy support output after clearing error counters

E.

a detailed description of the problem