VMware 2V0-17.25 - VMware Cloud Foundation 9.0 Administrator

The VCF 9.0 Operations Guide – Views and Reports explains the four types of views available for custom dashboards:

Object Relationship View: Displays dependencies and hierarchy between objects (for example, VMs, hosts, datastores) but does not provide exportable tabular data.

Scoreboard View: Provides a high-level KPI visualization of a few key objects but is not intended for large tabular exports.

List View (Correct): Displays tabular data across many objects, such as CPU, memory, and disk metrics for VMs. The guide states: “List views are useful when you want to compare metrics across multiple objects and can be exported to CSV for further analysis.”

Trend View: Focuses on historical data and growth over time, but export to CSV is not its primary purpose.

Because the security team requires both tabular comparison of VM resource usage and the ability to export the data to CSV , the List View is the only option that meets both requirements.

The VCF Operations Dashboards Guide describes the Storage Overview dashboard :

“ The Storage Overview dashboard provides visibility into capacity, performance, and health across vSAN and non-vSAN datastores. Administrators can track datastore utilization, latency, throughput, and availability from a single pane of glass. ”

Diagnostic Findings (B) shows troubleshooting insights, not full storage details. Data Protection & Recovery (C) covers backup/replication information. VCF Health (D) focuses on SDDC Manager, vCenter, NSX, and host health, not datastore metrics.

Therefore, the required datastore overview is accessed through the Storage Overview dashboard in VCF Operations.

In VMware Cloud Foundation 9.0, the construct of VM Applications Organizations was deprecated in favor of All Applications Organizations. The documentation highlights this change:

“Organizations for All Applications provide a unified model for managing both VM and Kubernetes workloads. They support third-party integrations such as Tanzu Salt and Active Directory, and enable deployments to Native Public Cloud endpoints.”

Since the customer upgraded from VCF 5.2, their first new Organization after the upgrade must use the All Applications model. VM Applications Organizations (Option A) are legacy and do not support the full feature set such as NPC or third-party integrations. Option C is incorrect because the Fleet Management API is for monitoring and operational insights, not for creating Organizations.

Therefore, the administrator must create the new Organization as an All Applications Organization in the VCF Automation Provider Management Portal.

The Storage Overview dashboard in VCF Operations provides consolidated visibility into storage resources, including:

vSAN datastores

VMFS datastores

NFS datastores

Capacity utilization

Performance metrics

Health indicators

The VCF documentation states:

“The Storage Overview dashboard provides a unified view of storage capacity, performance, and health across vSAN and non-vSAN datastores.”

Other options are not suitable:

VCF Health (A) focuses on component health (vCenter, NSX, ESXi).

Data Protection & Recovery (B) covers backup and DR insights.

Diagnostic Findings (C) highlights detected issues but not comprehensive storage inventory.

Thus, the correct location is the Storage Overview dashboard.

In VMware Cloud Foundation 9.0, configuration drift detection is handled through VCF Operations Configuration Management integrated with vSphere Configuration Profiles .

According to the VCF 9.0 documentation:

vCenter Version Requirement (D): Configuration drift monitoring requires vCenter 8.0 Update 3 or later , as this introduces the enhanced configuration profile capabilities necessary for drift comparison.

Create a Configuration Template (E): VCF Operations requires a defined baseline configuration template to compare cluster states against.

Assign the Template to a Policy (F): Policies enforce and monitor configuration compliance. Assigning the template to a policy allows drift detection against the desired state.

Incorrect options:

vCenter 9.0 (A) is not required; 8.0 U3 is sufficient.

A collector (B) is not specifically required for drift detection.

Scheduling drift detection (C) is part of policy evaluation, not a standalone mandatory step.

Configuring vSphere Configuration Profiles (G) is beneficial but not mandatory for drift monitoring via VCF Operations.

Thus, the three required steps are: vCenter 8.0 U3 or later, create a configuration template, and assign it to a policy.

VCF Operations primarily focuses on metrics, performance, and health monitoring. However, detailed event-level data, log entries, and historical audit records are not fully captured unless log aggregation is enabled.

The VMware Cloud Foundation 9.0 documentation explains:

“VCF Operations for Logs provides centralized log aggregation and analytics across all VCF components, including ESXi, vCenter, NSX, and other infrastructure services.”

This solution enhances troubleshooting by:

Collecting syslogs and events from infrastructure components

Providing searchable log data

Correlating events across services

Retaining detailed historical log information

Other options are incorrect:

Management Pack (A) extends metrics, not detailed logs.

VCF Automation (B) is unrelated to troubleshooting logs.

Operations Diagnostics (C) is not the primary log aggregation solution.

Therefore, to capture missing event data for future incidents, the administrator should deploy VCF Operations for Logs .

Comprehensive and Detailed Explanation:

The VCF Operations 9.0 Monitoring Guide specifies: “For any alert definition to be active in the environment, it must be associated with and enabled in an Active Policy.” . Creating symptom and alert definitions only defines conditions; they do not generate alerts until policies include them. REST notification plugins or payload templates are used for outbound integrations, not for enabling alerts. A super metric is only needed for custom composite KPIs, not for native read latency which is a standard metric already available. Therefore, the required step is to enable the alert in an Active Policy so that when the symptom triggers (latency > 1 ms), the alert activates.

VCF 9.0 documents two Operations for Logs/Operations models— Simple (Standard) and High Availability (Cluster) —and highlight that Simple is the minimal footprint option intended for test/dev: “ Architecture flexibility: Can be deployed in a Simple or Highly Available Cluster deployment. Recommended deployment is a HA Cluster… Simple deployment is for test/dev environments, it is not for production use cases. ”

By contrast, HA/clustered models increase resources to provide redundancy at scale. Since the requirement is the smallest resource footprint , the Simple model is the correct selection. (Stretched/Continuous Availability options are not listed VCF Operations models in this context.)

Resetting identity management in VCF requires removal of existing identity configurations, including external identity providers and the Identity Broker configuration. The VCF documentation states that to reset identity services, administrators must remove the SSO configuration, including broker settings, and then reconfigure SSO.

Option B ensures complete cleanup of identity integrations.

Option C re-establishes identity management with the correct configuration.

Disabling (D) or reverting (E) is not a supported reset method. Leaving provisioned users/groups (A) would not fully reset identity management.

When using Fibre Channel (FC) as the principal storage type for a workload domain in VMware Cloud Foundation, storage must already be provisioned and visible to all participating ESXi hosts.

The VCF documentation specifies that for VMFS on FC deployments:

Storage LUNs must be created on the SAN.

The LUNs must be zoned and presented to all ESXi hosts.

Hosts must be able to detect the presented LUNs before domain creation.

Incorrect options:

SSD disks (A) are required for vSAN, not Fibre Channel.

Port binding (B) is required for iSCSI, not FC.

A VMkernel interface for storage (D) is required for IP-based storage (NFS/iSCSI), not Fibre Channel.

Therefore, the key prerequisite is ensuring LUNs are presented to all ESXi hosts .