Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

Cisco 300-610 - Designing Cisco Data Center Infrastructure (DCID)

Page: 3 / 8
Total 258 questions

An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these

considerations in mind:

    The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.

    The port should support management over IP.

Which port type must be used to meet these requirements?

A.

management port

B.

console port

C.

connectivity management port

D.

Ethernet port

Which orchestration tool must be used to manage VXLAN fabrics and includes a built-in dashboard and real-time network health summary for managed devices?

A.

Puppet

B.

Ansible

C.

Cisco Nexus Dashboard Fabric Controller

D.

Cisco Intersight

An engineer must design Layer 2 connectivity for a subnet between two data centers. The engineer must ensure seamless host mobility and optimal first-hop routing. Which attribute must be synchronized across all data centers to achieve this goal?

A.

NX-OS version

B.

DCNM to manage both fabrics

C.

multicast group

D.

anycast gateway MAC

Refer to the exhibit During a synchronization of port rotes, a device receives a proposal message on one of its ports that is selected as the new root port. The logs show that Rapid PVST+forced all other ports to synchronize with the new loot information. The engineer analyzes the port stales and concludes that the device is synchronized with superior root information received on the root port, and all other ports are synchronized. What happens to a designated port that is in the forwarding state and is not configured as an edge port, if Rapid PVST+ forces it to synchronize with new root information?

A.

It does not receive BPDUs for transmission.

B.

IT immediately replies with its own information.

C.

It discards frames switched from another port.

D.

It transitions to the Mocking state

A client in a commercial building Installs a Cisco blade server in the multitenant Cisco UCS blade Infrastructure. To cut operating costs me client’s data center is shared with other organizations. The client asks an engineer prevent third parties from accessing their equipment and from accessing BlOS-related information when booting a server. Which Two policies must be used to meet these requirements? (Choose two.)

A.

quiet boot

B.

post error pause

C.

ASPM support

D.

CDN control

E.

front panel lockout

A networking team must implement a new management solution for the network devices at their organization. The solution must meet these requirements

• It must enable seamless monitoring, configuration, and troubleshooting while ensuring security and reliability.

• It must allow access to devices even if the production network is down.

• It must be easy to use and manage.

The company's budget is limited. Which implementation must the team perform to meet the requirements?

A.

in-band management solution that leverages the existing production network infrastructure for management traffic

B.

console-server solution to provide a dedicated management network

C.

out-of-band management solution to provide redundancy and flexibility

D.

remote-access VPN solution to provide secure access to the network devices

A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.

Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

A.

One, two, four and eight links are supported to be used between each IOM and fabric interconnect.

B.

IOM is connected to the fabric interconnect that is acting as fabric A. and IOM B is connected to the fabric interconnect that is acting as fabric B.

C.

Any combination of one to eight links are supported to be used between each IOM and fabric interconnect.

D.

The lOMs are connected with multiple straight and cross-connect links toward a pair of nonclustered fabric interconnects.

E.

Straight and cross-connect links should be used between the lOMs and fabric interconnects to offer higher availability.

An engineer must design a DNS service available to multiple network zones as a shared service. The network zones are deployed as VRFs within the data center network and no firewall is available for communication between VRFs.

Which protocol is needed to implement the shared services?

A.

BGP

B.

OSPF

C.

ISIS

D.

VXLAN

A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?

A.

Cisco intersight

B.

Cisco UCS director

C.

Cisco data center network manager

D.

Cisco tetration

Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

A.

HyperFlex Edge support

B.

encryption offload cards

C.

dedicated compute nodes

D.

fabric interconnects