Halloween Sale Special - 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: newyear

Cisco 350-601 - Implementing Cisco Data Center Core Technologies v1.1 (350-601 DCCOR)

Cisco 350-601 Premium Access     Download Demo    
Page: 12 / 13
Total 422 questions

Which data interchange format is presented in this output?

A.

XML

B.

YAML

C.

JSON

D.

CSS

Refer to the exhibit Two Cisco Nexus 9000 Sef«s Switches aie connected using the interface Ethernet 1/1 Which command must be configured under interface Ethernet 1:1 to conjure the switches as EIGRP neighbors?

A.

ip authentication key-chain eigrp Pallini EiGRP

B.

ip authentication key-chain Pallini eigrp

C.

ip authentication key-chain elgrp Pallini

D.

ip authentication key-chain Pallini EIGRP Pallini

Refer to the exhibit.

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

A.

IPv4 unicast address

B.

IPv4 multicast address

C.

IPv4 gateway address

D.

IPv4 anycast address

What is the impact of an electronic programmable logic device upgrade on a Cisco MDS 9000 Series Director Switch with dual supervisors?

A.

A manual reboot is required for each supervisor.

B.

Nondisruptive upgrades without traffic interruptions can be performed.

C.

The upgrade is aborted if any module is unsupported.

D.

A complete system reboot is triggered.

An engineer installs a group of Cisco Nexus 93180YC-FX3 switches. The intended Cisco NX-OS software image is nxos64-cs.10.2.4.M.bin. The engineer must use a Python script to automate the upgrade and configuration of the switches when they are powered on. Which design action must be taken?

A.

Deploy the configuration script on the DHCP server.

B.

Install the Cisco NX-OS software image on the DHCP server.

C.

Install the Cisco NX-OS software image on the TFTP server.

D.

Deploy the configuration script on the TFTP server.

Drag and drop the items from the left into the corresponding columns as a feature or capability of inter sight Managed Mode or UCS Manager Mode.

Refer to the exhibit. An engineer associates an ESX service profile to a blade server. The engineer adds a VLAN to the vNIC Template named vNIC-0 by using Cisco UCS Manager. The engineer discovers that the VLAN is missing on the vNIC of the ESX service profile. Which action adds the VLAN to the vNIC?

A.

Change Template Type for ESX to Updating Template.

B.

Change Template Type for vNIC-0 to Updating Template.

C.

Remove both templates and recreate them as Updating Templates.

D.

Remove the VLAN from the template and add the VLAN again.

Refer to the exhibit. An engineer configured OSPF on a Cisco Nexus 9000 Series Switch. The engineer planned to authenticate OSPF messages on interface Eth1/1 and use md5 for authentication and encrypt password using 3DES. Which command snippet must be used to resolve the issue?

A.

ip ospf authentication md5ip ospf authentication-key 3 P@ssw01

B.

ip ospf authentication message-digestip ospf message-digest-key 2 md5 3 P@ssw01

C.

ip ospf authentication md5ip ospf message-digest-key 2 md5 3 P@ssw01

D.

ip ospf authentication message-digestip ospf authentication-key 3 md5 P@ssw01

What is the impact of a nondisruptive upgrade on fabric and modular switches?

A.

During the upgrade. new devices cannot log in to the fabric.

B.

When the installation is complete, the system BIOS must be updated.

C.

If a zone server merge is in progress, the upgrade continues without interruption.

D.

The upgrade disrupts the control plane for more than 120 seconds.

An engineer must deploy a new Cisco MDS 9000 Series Switch and be able to receive LinkUp/LinKDown notifications that were sent using a secure industry standard. Which technology must be used to accomplish this goal?

A.

PMON

B.

SPAN

C.

RMON

D.

SNMP