F5 771-101 - Application Delivery Fundamentals

F5 771-101 Premium Access Download Demo

Page: 4 / 8
Total 240 questions

Question # 31

Which two OSI layers map lo IP subnetting and TCP window sizing functions? (Choose two)

Application

Data Link

Transport

Network Session

Question # 32

Which support service is required to synchrony the time stamps in system logs from these devices?

SNMP

Syslong

SMTP

DNS

Question # 33

An administrator is trying to debug why the 10.0.10.0/24 network is inaccessible from a certain server. The server is able to access the internet Successfully.

The administrator inspects the routing table and ARP table on the affected server.

Given the terminal output shown, what could be causing this issue?

The default gateway is not sending ARP responses

The static route for 10. 0.10.0/24 is misconfigured

The local server is unable to receive ARP responses

The default route (0. 0. 0. 0/0) is misconfigured

Question # 34

A new VLAN segment has been added to the network. Only the existing connected interface may be used. What should the BIG-IP Administrator do to allow traffic to both the existing and the new VLAN?

configure VLAN with Link Aggregation Control Protocols (LACP)

configure a tagged VLAN

configure an untagged VLAN

configure VLAN to use interface with Multiple Spanning Tree Protocol (MSTP)

Question # 35

VLAN test-vlan" is configured on interface 1 1 instead of interface 1.2. Which TMSH command should be used to correct this issue?

modify /net test vlan interfaces {1.2}

modify /net test-vlan interfaces replace all with {1 2}

modify /net vlan test-vlan interfaces replace all with {12}

modify /net sian test-vlan interfaces {1 2}

Question # 36

What should a BIG-IP Administrator configure to minimize impact during a failure?

MAC masquerading

Clone pool

External monitors

One Connect profile

Question # 37

What advantage does an active-standby configuration have over an active-active configurations?

Active-standby configuration allows for the backup of the peer configuration

Active-standby utilizes the hardware more efficiently

Active standby Uses significantly less power consumption than active-active

Active-standby is less complex to troubleshoot

Question # 38

A new virtual server is being tested to replace http://myapp.mydomain.com. The original virtual server is still on use. And the new virtual server is on a different ip address. What should be done to test this new virtual server using the fully quailed domain name for this application?

add a DNS record for the fully qualified domain name

add the fully qualified domain name to the browser cache

make an entry in the client host file

make an entry in the web server services file

Question # 39

Web application http://www example.com at 10.10.1.1.10 is unresponsive. A recent change installed new firewalls in the network. Which command should be used to locate where data loss has occurred within the network?