Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

Riverbed 830-01 - RCPE Certified Professional WAN Optimization

Page: 4 / 12
Total 402 questions

What is the default In-path rule on an Interceptor appliance?

A.

Optimize All

B.

Pass-through All

C.

Auto All

D.

Redirect All

What is configured in an Endpoint policy? (Choose the best answer)

A.

Redundant Steelhead Mobile Controllers

B.

In-path rules

C.

Group IDs

D.

Port labels

Which of the following is Endpoint alarm?

A.

Locked secure vault

B.

Firewalled status

C.

Network interface error

D.

Temperature

E.

Memory paging

What are the four types of Interceptor appliance In-path rules?

A.

Auto, Pass-through, Drop, Feint

B.

Auto, Pass-through, Discard, Deny

C.

Redirect, Pass-through, Discard, Deny

D.

Auto1, Auto2, Allow, Pass-through

A Steelhead Mobile client can be configured to operate in visible or invisible mode (show client in system tray parameter). What part of the configuration is this setting included?

A.

Acceleration policy

B.

Authentication policy

C.

Endpoint policy

D.

Port labels

The amount of memory required for Steelhead Mobile installation varies between 81 MB to 228 MB. What is the reasons for the variation?

A.

Number of TCP connections

B.

Types of application

C.

Datastore size

D.

Bandwidth

E.

All of the above

On the Interceptor appliance, what are the possible filter settings on a load balancing rule? (Select 4)

A.

Source Port

B.

Source IP Subnet

C.

Destination IP Subnet

D.

Destination Port

E.

VLAN ID

On the Steelhead Mobile Controller, what VPNs require the use of Reorder Intermediate Drivers? (Select 2)

A.

Nortel VPN

B.

Cisco VPN client

C.

Check Point

D.

OpenVPN

E.

Riverbed VPN client

A customer with no Steelhead appliances currently deployed wants to test Steelhead Mobile on a client that connects to corporate through a VPN over the Internet. The customer has the requirement that there be no network disruptions during the initial testing phase. Which of the following would work?

A.

Place a Steelhead appliance in-path behind the WAN router and have the Steelhead Mobile client use auto-discovery rules

B.

Use server-side out-of-path with a Steelhead and use fixed-target rules on the Steelhead Mobile clients

C.

Place a Steelhead in-path directly behind the VPN gateway and use auto-discovery on the Steelhead Mobile client

D.

Use server-side out-of-path with the Steelhead Mobile Controller and use a fixed-target on the Steelhead Mobile client

E.

Place the Steelhead Mobile Controller in-path directly behind the VPN gateway and use auto-discovery on the Steelhead Mobile client

Which TCP port will two Interceptor appliances communicate across in a parallel deployment?

A.

7800

B.

7810

C.

7840

D.

7850

E.

7860