BCS CTFL4 - ISTQB Certified Tester Foundation Level CTFL 4.0 Exam

Test-driven development is not an example of a typical generic skill required for testing, but rather an example of a specific technical skill or a development practice that may or may not be relevant for testing, depending on the context and the objectives of the testing activities. Test-driven development is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a skill that is generally expected or needed for testers, especially for testers who are not involved in unit testing or who do not have access to the source code. The other options are examples of typical generic skills required for testing, which are skills that are applicable and beneficial for testing in any context or situation, regardless of the specific testing techniques, tools, or methods used. The typical generic skills required for testing include:

Be able to use test management tools and defect tracking tools: These are tools that help testers to plan, organize, monitor, and control the testing activities and resources, as well as to record, track, analyze, and resolve the defects detected during testing. These tools can improve the efficiency, the effectiveness, and the communication of the testing process, as well as to provide traceability, metrics, and reports for the testing outcomes.

Be able to communicate defects and failures to developers as objectively as possible: This is a skill that involves the ability to report and describe the defects and failures found during testing in a clear, concise, accurate, and unbiased manner, using relevant information, evidence, and terminology, without making assumptions, judgments, or accusations. This skill can facilitate the collaboration, the understanding, and the resolution of the defects and failures between the testers and the developers, as well as to prevent conflicts, misunderstandings, or blame games.

Possess the necessary social skills that support effective teamwork: These are skills that involve the ability to interact, cooperate, and coordinate with other people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. These skills can include communication, negotiation, leadership, motivation, feedback, conflict resolution, etc. These skills can enhance the quality, the productivity, and the satisfaction of the testing process, as well as to foster a positive and constructive testing culture. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches

ISTQB® Glossary of Testing Terms v4.0, Test-driven Development, Test Management Tool, Defect Tracking Tool, Defect Report, Failure, Social Skill2

The absence-of-errors fallacy is the mistaken belief that just because a software system is free of defects, it will meet the user's needs and expectations. Involving users early through practices like prototyping helps ensure that the development team is building the right system that meets user expectations, not just a system that is defect-free. This approach aligns with the testing principle that emphasizes understanding the users' needs and ensuring the system fulfills them. This principle is explained in the ISTQB CTFL Syllabus v4.0​​.

The statement that "static testing increases development costs and time" is NOT correct. Static testing actually helps to reduce development costs and time by identifying defects early in the development process before dynamic testing is performed. Early detection of defects reduces the cost and effort required to fix them and prevents the propagation of defects to later stages, thus reducing overall testing and development costs.

References:ISTQB CTFL Syllabus, Section 3.1.2, "The Value of Static Testing."

Static analysis is the process of examining the work products of a software development or testing activity without executing them. Static analysis can be applied to various types of work products, such as requirements, design, code, test cases, etc. However, test plans are not suitable for static analysis, because they are high-level documents that describe the test objectives, scope, strategy, resources, schedule, and risks of a testing project. Test plans are not executable or formalized in a way that static analysis tools can analyze them. Therefore, option A is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 2.2.1, page 20; ISTQB® Glossary v4.02, page 45.

Comprehensive and Detailed In-Depth Explanation:Checklist-based testingusesspecific test conditions(B) that help testers ensure key aspects are validated. The checklist items can be derived from past defects, requirements, or regulatory standards.

(A) is incorrectbecause general guidelines lack specificity.

(C) is incorrectbecause checklists can be used for both manual and automated testing.

(D) is incorrectbecause checklists are useful for both functional and non-functional testing (e.g., security, performance).

Checklistshelp ensure completenesswithout enforcingstrictly scriptedexecution.

Effort estimate does not depend on the budget of the project, but rather on the scope, complexity, and quality of the software product and the testing activities1. Budget is a constraint that may affect the feasibility and accuracy of the effort estimate, but it is not a factor that determines the effort estimate. Effort estimate is the amount of work required to complete the testing activities, measured in terms of person-hours, person-days, or person-months2.

The other options are correct because:

A. Once the test effort is estimated, resources can be identified and a schedule can be drawn up, as they are interrelated aspects of the test planning process3. Resources are the people,tools, equipment, and facilities needed to perform the testing activities4. Schedule is the time frame and sequence of the testing activities, aligned with the project milestones and deadlines5.

B. Effort estimate can be inaccurate because the quality of the product under tests is not known, as it affects the number and severity of the defects that may be found and the rework that may be needed to fix them6. Quality is the degree to which the software product satisfies the specified requirements and meets the needs and expectations of the users and clients7.

D. Experience based estimation is one of the estimation techniques, which relies on the judgment and expertise of the testers and other project stakeholders to estimate the test effort based on similar projects or tasks done in the past. Experience based estimation can be useful when there is a lack of historical data, formal methods, or detailed information about the software product and the testing activities.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 154

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 155

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 156

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 157

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 158

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 159

7 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 16

[8] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 160

[9] ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 161

A failure is an event in which a component or system does not perform a required function within specified limits1. A requirement is a condition or capability needed by a user to solve aproblem or achieve an objective2. In this case, the requirement is that the diagnostics tests should execute in less than 2 seconds. Therefore, any event that violates this requirement is a failure. The only option that clearly violates this requirement is B. The diagnostic tests take too much time to execute. If the diagnostic tests take more than 2 seconds to complete, then they do not meet the specified limit and thus fail. The other options are not necessarily failures related to the specified requirement. Option A. The diagnostic tests fail to start after a system reset is a failure, but not related to the time limit. It is related to the functionality of the self-diagnostics module. Option C. The diagnostic tests that measure the speed of the memory, fail is also a failure, but not related to the time limit. It is related to the accuracy of the memory tests. Option D. The diagnostic tests fail due to incorrect implementation of the test code is also a failure, but not related to the time limit. It is related to the quality of the test code. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Requirements Engineering Fundamentals.

The question is about identifying an example of testing contributing to higher quality. Quality is the degree to which a component, system or process meets specified requirements and/oruser/customer needs and expectations1. Testing is the process consisting of all lifecycle activities, both static and dynamic, concerned with planning, preparation and evaluation of software products and related work products to determine that they satisfy specified requirements, to demonstrate that they are fit for purpose and to detect defects2.

Therefore, testing contributes to higher quality by verifying and validating that the software products and related work products meet the specified requirements, are fit for purpose and have no defects, or at least have a reduced number of defects. Testing also provides information about the quality of the software products and related work products to the stakeholders, who can make informed decisions based on the test results3.

Out of the four given statements, only option D is an example of testing contributing to higher quality, as it shows that testing has detected a defect (a flaw in a component or system that can cause the component or system to fail to perform its required function4) and that the defect has been resolved (fixed and confirmed) prior to release (delivery of the software product to the customer or end user). This means that testing has prevented a potential failure (an event in which a component or system does not perform a required function within specified limits) from occurring in the operational environment, and thus has improved the quality of the software product.

Option A is not an example of testing contributing to higher quality, as it is a reporting activity that summarizes the test results and evaluates the test objectives, but does not directly affect the quality of the software product or related work products. A test summary report is a document that records and communicates the outcomes of testing activities, including test completion criteria, test results, incident reports, test summary and evaluation, and lessons learned.

Option B is not an example of testing contributing to higher quality, as it is a planning activity that estimates the resources and time needed for testing activities, but does not directly affect the quality of the software product or related work products. A test effort estimate is an approximation of the amount of work and/or the duration of time required to perform testing activities.

Option C is not an example of testing contributing to higher quality, as it is a preparation activity that sets up the test environment (an environment containing hardware, instrumentation, simulators, software tools, and other support elements needed to conduct a test), but does not directly affect the quality of the software product or related work products. A test environment installation is a process of installing and configuring the test environment according to the test environment specification.

References:

1: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 10

2: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 11

3: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 12

4: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 77

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 78

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 79

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 80

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 81

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 82

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 83

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 84

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 85

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 86

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 87

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 88

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 89

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 90

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 91

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 92

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 93

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 94

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 95

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 96

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 97

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 98

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 99

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 100

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 101

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 102

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 103

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 104

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 105

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 106

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 107

Branch coverage is a type of structural coverage metric that measures the percentage of branches or decision outcomes that are executed by the test cases. A branch is a point in the code where the control flow can take two or more alternative paths based on a condition. For example, an if-else statement is a branch that can execute either the if-block or the else-block depending on the evaluation of the condition. Branch coverage ensures that each branch is taken at least once by the test cases, and thus reveals the behavior of the software under different scenarios. Branch coverage is also known as decision coverage or all-edges coverage.

Branch coverage is suitable for testing the cases where a specific action is not allowed, because it can verify that the test cases cover all the possible outcomes of the conditions that determine the action. For example, if the program has a condition that checks if the manufacturing stage can be stopped, then branch coverage can ensure that the test cases cover both the cases where the stage can be stopped and where it cannot be stopped. This way, branch coverage can help identify any missing or incorrect branches that may lead to undesired or unsafe actions.

The other options are not correct because they are not suitable for testing the cases where a specific action is not allowed. Code coverage is a general term that encompasses various types of coverage metrics, such as statement coverage, branch coverage, data flow coverage, etc. Code coverage does not specify which type of coverage metric is used for the analysis. Data flow coverage is a type of structural coverage metric that measures the percentage of data flow paths that are executed by the test cases. A data flow path is a sequence of statements that define, use, or kill a variable. Data flow coverage is useful for testing the correctness and completeness of the data manipulation in the software, but not for testing the conditions that determine the actions. Statement coverage is a type of structural coverage metric that measures the percentage of statements or lines of code that are executed by the test cases. Statement coverage ensures that each statement is executed at least once by the test cases, but it does not reveal the behavior of the software under different scenarios. Statement coverage is a weaker criterion than branch coverage, because it does not account for the branches or decision outcomes in the code. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, Chapter 4: Test Techniques, Section 4.3: Structural Testing Techniques, Pages 51-54.

A test tool used for the analysis of a developer's code prior to its execution falls under the category of static testing tools. Static testing involves examining the code and documentation without executing the code. These tools are used to perform static analysis, which helps in identifying potential defects and code quality issues early in the development process. The ISTQB CTFL syllabus specifies that static analysis tools are essential for finding defects that do not manifest themselves during the execution of the program.

References:ISTQB CTFL Syllabus, Section 3.1, "Static Testing."