New Year Sale Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmas50

AVIXA CTS-I - Certified Technology Specialist – Installation

AVIXA CTS-I Premium Access     Download Demo    
Page: 12 / 15
Total 477 questions

For the purpose of sound reinforcement, loudspeakers are at the end of the _____ path.

A.

electrical signal

B.

acoustic energy

C.

reproduced signal

D.

transduced energy

Where should a line driver be installed?

A.

In the middle of the signal pathway

B.

Near the destination

C.

By the source of the noise

D.

Near the source

More bandwidth is required when more _____ is needed.

A.

impedance

B.

color

C.

light

D.

Detail

The original LCD monitor specified on the project was not available. The model used to replace it has a lower native resolution than the original monitor. What device could be used to keep the EDID table from now calculating the EDID table to a lower resolution for the whole system?

A.

Scan Converter

B.

Scaler

C.

Transcoder

D.

EDID emulator

Before decommissioning a system where existing components will be reused, the AV technician should:

A.

Ensure the equipment that will be reused is fully operational

B.

Assure that the client knows the AV technicians are disassembling the system

C.

Calculate the value of equipment costs for insurance purposes

D.

Check to see if the old equipment will work with the new design

What type of drawing would you use to find out exactly how the projector should be mounted to the ceiling?

A.

Reflected ceiling plan

B.

Mechanical drawing

C.

Detail drawing

D.

Section drawing

Phantom power typically ranges from _____ VDC.

A.

5 to 35

B.

1 to 10

C.

12 to 48

D.

20 to 55

Items which require user control should be placed in the _____ of the rack.

A.

very top

B.

middle

C.

back

D.

Bottom

During a technical site survey for an installation with a display, information gathered should include:

A.

Color of the walls

B.

Receptionist name and phone number

C.

Ceiling height and construction method

D.

Rules governing use of the freight elevator

A technician installs a condenser microphone. It is not picking up audio. What is the MOST LIKELY cause?

A.

Pins 2 and 3 are swapped at the XLR connector

B.

The cable run is too long

C.

Phantom power is turned off

D.

The microphone is defective