Fortinet FCP_FAZ_AD-7.4 - FCP - FortiAnalyzer 7.4 Administrator

https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-on-FortiAnalyzer/ta-p/194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20hot%20swapping

RAID level affects how much disk space is reserved for redundancy and fault tolerance. For example, RAID 1 mirrors data, meaning you need more space for redundancy, while RAID 5 or RAID 6 reserves space for parity.

Disk size directly influences the total available and reserved space since the larger the disk, the more space may need to be reserved for system functions, logs, and other operations.

The total quota and license type do not directly impact the reserved disk space, though they do influence other aspects of capacity and functionality.

FortiAnalyzer_7.0_Study_Guide-Online.pdf page 93: The fourth method uses the Fortinet Security Fabric authorization process. This method requires that both FortiGate and FortiAnalyzer are running version 7.0.1 or higher. It is also required that the FortiGate administrator has valid credentials to log in on FortiAnalyzer and complete the registration.

https://docs.fortinet.com/document/fortianalyzer/7.2.1/administration-guide/13897/adding-a-fortigate-using-security-fabric-authorization

To prevent log modification or tampering: The set log-checksum command with options like md5 or sha1 calculates a checksum value for the log data. This checksum acts as a digital signature, allowing FortiAnalyzer to verify the integrity of the logs and detect any unauthorized modifications.

To protect log data from man-in-the-middle attacks: By using checksums, FortiAnalyzer can ensure that the logs received have not been altered in transit during a man-in-the-middle attack. If the checksum of the received logs doesn't match the expected value, it indicates potential tampering.

FortiAnalyzer_7.0_Study_Guide-Online page 149

When the RAID status is Degraded, it typically indicates that one or more drives in the RAID array have failed or are missing, causing the RAID array to operate with reduced redundancy. In this state, the array is still functioning, but it's at risk because the fault tolerance provided by RAID is compromised.

Option B is correct because you must establish an IPsec tunnel ID and pre-shared key to secure the communication between FortiAnalyzer and FortiGate with IPsec12. The tunnel ID is a unique identifier for each tunnel and the pre-shared key is a secret passphrase that authenticates the peers.

Option D is correct because IPsec is only enabled through the CLI on FortiAnalyzer1. You cannot configure IPsec settings through the GUI on FortiAnalyzer.