Huawei H19-424_V1.0 - HCSP-Presales-Campus Network Planning and Design V1.0

Establish an SRv6 Policy Group tunnel group for local and remote devices on the same plane.

The minimum color of the SRv6 Policy Group tunnel group is 1,000,000, and the colors of different VPN services and planes do not need to be distinguished, but can be the same.

Configure an SRv6 Policy Group tunnel group for a VPN service.

Multiple policy tunnels can be planned within the group according to the actual needs of users.

CloudEngine S series switches

CE series switches in data centers

WLAN AP

AR series routers

USG series firewalls

If you already have a tool, you can fully trust the tool, and you don't need special skills

I have a relatively high education, and I can solve problems by myself and can use them

The tool is simple, and I have two years of work experience, so there is no problem with it

Have systematic and professional knowledge of data communication network, and have more than two years of experience in data communication equipment development and maintenance

For the Locator CIDR block planning of SRv6, the appropriate mask should be set according to the number of IPv6 SIDs that may be used by the device.

loatos svV6_locator ipu6-prelix21.DB8ABCD: .b4 static 32, Locator is 2001.DB8.ABCD:, length 64 bits, static segment occupies 32 bits, dynamic segment occupies 32 bits args field occupies O bits. The starting value of the state segment is: 2001:DB8:ABCD:0000:0000:0000:C

Locator SID supports static configuration or dynamic allocation, end-op and end-m must be statically configured, and static configuration is also recommended for end and end.x, which is convenient for network O&M. Other SIDs can be assigned dynamically.

Devices at the same site belong to the same large network segment with the same prefix, and different devices are assigned to the small network segment with the same prefix in the large network segment.

Different slots/sub-slots are used for uplink and downlink slices of the same AP.

The multimedia slice drainage scheme is SAC/DFI application identification ACL traffic identification.

The common slice drainage scheme is to use the IP layer DSCP to map to different queues.

The highly reliable slice drainage solution is ACL traffic identification

Monitoring: V5 is based on http 2.0 channel, and Spruce is based on telemetry channel (GRPC). O&M: Based on the SSH channel, V5 is different from Spruce.

O&M: Based on the SSH channel, V5 is different from Spruce.

Acceptance: Based on the netconf channel, V5 is no different from Spruce.

Configuration/alarm: Carried on the netconf channel, the yang model is different, and the spruce adopts the yang 2.0 model.

Coverage areAnswer: confirm the key coverage area (such as office, conference room, etc.) and common coverage area (such as stairs, toilets, etc.) required by the customer

Pay the signal field strength requirements in the area, for example, -40dBm~-65dBm in key areas, and >-75dBm in ordinary areas

Number of concurrent users: the total number of terminals connected in the current coverage area, and how many people in the coverage area are planned to be connected at the same time

Bandwidth requirements: the main types of services planned by the customer and the bandwidth requirements for each user

Load sharing

VPN FRR

PCEP

TE HSB

Netconf

HTTP

HTTP2.0

HTTPS

Configuration service exception. Contact maintenance engineere（netconf communication failed）

Service process faied

The service is abormal

Unrecongnizeinformation