Weekend Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmas50

HP HPE0-S59 - HPE Compute Solutions

HP HPE0-S59 Premium Access     Download Demo    
Page: 2 / 4
Total 104 questions

Your customer plans to deploy VMware ESXi 7.0 U2, and they are looking for a hardware platform that will allow them to use up to 24 TB of physical memory.

Which HPE compute system meets the customer's requirements?

A.

HPE Superdome Flex

B.

HPE ProLiant DL380 Gen 10 Plus

C.

HPE ProLiant DL580 Gen 10

D.

HPE Synergy 480 Gen10 Plus

Your customer is implementing an HPE Synergy solution based on three frames.

Click each of the ports that can be used to connect satellite modules.

What is a restriction of using a RoCE network?

A.

It is by default configured as an untagged network and cannot be a part of a network set.

B.

It does not support Private VLAN and Multicast VLAN.

C.

it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

D.

It does not support smart link and private network features.

Which statement about the HPE OneView Update Readiness Checker is true?

A.

It can be used to verify compatibility of a given Synergy Service Pack with a specific version of HPE OneView.

B.

It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.

C.

It can be used to examine the firmware version installed on compute nodes and compliance with HPE OneView version.

D.

It can be used to determine whether the latest milestone HPE OneView edition is currently installed.

When should Private Network be enabled?

A.

When a customer needs the ability to create a network dedicated to a single compute node.

B.

When a customer needs additional network security by limiting traffic flow for the given network.

C.

When a customer needs a heartbeat network between two compute nodes for building a cluster.

D.

When a customer needs each port associated with a given uplink set to be 100Gb/s.

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.

The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A.

If the D3940 module is imported in managed state that allows volume provisioning.

B.

If there Is a logical interconnect created based on the 12Gb SAS switches.

C.

If the D3940 storage module is property licensed through HPE OneView interface.

D.

If there is at least one ISCSI network configured that will provide access to the module.

Refer to Exhibit:

Your customer plans to update the firmware for the logical interconnect shown.

Based on the information in the exhibit, which statement about network connectivity is true?

A.

Only the manual orchestration method will allow a firmware upgrade without causing network downtime.

B.

It is possible to update this logical interconnect without network downtime if orchestrated method is used.

C.

Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.

D.

Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.

Click the option that will allow you to create an OS Deployment Plan with customized kickstart.

You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.

What is required from the VMware side to enable LAG?

A.

Virtual Distributed Switch

B.

vSphere Standard license

C.

Load balancing cluster

D.

Dedicated VMKernel port

Your customer has the following HPE Synergy setup:

- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port

- 2 HPE Composer 2 modules

- 15 HPE D3940 Storage Modules, one per frame

- 2 HPE 12Gb SAS switches per frame

Which statement about this setup is true?

A.

The customer must create at least five logical enclosures for this setup.

B.

To manage 15 frames, additional HPE Composers are required.

C.

The customer can install up to 12 HPE Synergy 480 compute nodes per frame.

D.

If properly cabled, any compute node can access any HPE D3490 storage module