Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

HP HPE0-S60 - Delta - HPE Compute Solutions

Page: 2 / 3
Total 79 questions

An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.

Click the parameter that the customer should configure within an uplink set to meet this requirement

You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.

Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

A.

App Volume Set

B.

Storage Container

C.

Virtual Volume Set

D.

virtual Volume

Which compute node parameters are captured within server hardware type?

A.

Number of the CPUs

B.

installed operating system

C.

Mezzanine card configuration

D.

Size of the memory Installed

After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.

Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61

Which statement about this update process is true?

A.

To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.

B.

The customer can update directly to 6,1, but HPE OneView downtime will be longer.

C.

Before updating to 6,1, customer should increase memory size on the HPE Composer.

D.

The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Which statement about login redistribution is true?

A.

Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame

B.

Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports

C.

Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules

D.

Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Which statement about HPE Superdome nPars is true?

A.

Chassis in the same nPar can have different CPU configuration

B.

Rack Management Controller is required Tor nPar configuration

C.

Chassis in the same nPar can have different memory configuration

D.

nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Which statement about an HPE Oneview support dump is true?

A.

Appliance support dump by default contains a logical enclosure support dump

B.

Support dump is a binary file that can be opened only in a dedicated application

C.

Support dump can be created if HPE Virtual Connect modules are installed in the frame

D.

Preview support dump is available only when creating an appliance support dump

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.

The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

A.

If the D3940 module is imported in managed state that allows volume provisioning.

B.

If there Is a logical interconnect created based on the 12Gb SAS switches.

C.

If the D3940 storage module is property licensed through HPE OneView interface.

D.

If there is at least one ISCSI network configured that will provide access to the module.

Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration

- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy

- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards

They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration

- two HPE Synergy Virtual Connect SE 32Gb FC Modules

- two HPE Synergy 20Gb interconnect Link Modules

- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards

Which statement about the planned configuration change is true?

A.

Four compute modules must be moved to the second frame to balance the configuration

B.

The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option

C.

A license for an extended logical enclosure must be added to HPE OneView through GUI

D.

The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked