HP HPE6-A71 - Aruba Certified Mobility Professional Exam

An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.

What must the administrator do to solve this problem?

An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This

causes the controller to lose management access to the Mobility Master (MM). The administrator knows that the auto roll-back feature will revert the managed controller to a previous configuration that was used prior to the change.

Which command can the administrator use to validate that the rollback process is successful?

Refer to the exhibit.

What can be determined from the command output shown in the exhibit?

An administrator has a standalone controller that runs ArubaOS 8.x software and wants to upgrade it to a newer release. The upgrade will be performed from the front panel of the physical controller. The administrator places the new software in the root directory of a USB drive. On the controller’s LCD panel, no image is found.

What is the cause of this problem?

On the Aruba Mobility Master (MM), when is an AP configured to act as Mesh Portal or Mesh Point?

An administrator needs to authenticate users connected to an ArubaOS-Switch. The Aruba Mobility Controller (MC) authenticates the user and assigns user roles to wired users.

Which mode should the administrator configure on the MC?

An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user’s session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?

Refer to the exhibit.

An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?

Refer to the exhibit.

An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit.

-Zone A has six controllers that form a cluster.

-Zone B has three controllers that from a cluster.

-Zones C, D, and E have a single standalone controller each.

A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections form branch offices. All zones have the same AP Group name. One of the zones will not accept connections from the MultiZone APs.

Which could be a cause of this problem?

An administrator supports a network that contains ArubaOS-Switches and Mobility Controllers (MCs). Restrictive MC firewall policies, control wireless access. The administrator wants to implement a feature to apply the same MC firewall policies to users connected to the Ethernet switch ports.

Which ArubaOS-Switch feature provides this capability?