HP HPE6-A71 - Aruba Certified Mobility Professional Exam
An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps.
Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?
Refer to the exhibits.
Exhibit 1: WLAN VAP configuration
Exhibit 2: Microsoft NPS server configuration
Exhibit 3: Server group configuration for the VAP.
An employee authenticates with the username employee and the correct password. However, once the user authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role.
What should the administrator do to solve this problem?
An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assign the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
An administrator mistakenly configures the wrong VLAN setting on a managed controller’s interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?
Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?
An administrator makes a configuration change on a Mobility Master (MM) that causes a Managed Controller to lose connectivity with the MM. The MC attempts auto roll-back, but this fails.
How should the administrator recover from this problem?
Refer to the exhibit.
A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user’s wireless session?
Refer to the exhibit.
An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.
What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
An administrator needs to apply a patch to an Aruba environment to implement improvements for AirMatch. What is the Aruba recommended approach for this process without a reboot?
