Microsoft MS-700 - Managing Microsoft Teams

To ensure that users can perform the following actions:

Record Teams calls and Teams meeting.

Transcribe Teams calls and Teams meeting.

You need to do the following:

Turn on the recording and transcription settings in the Teams admin center. This will allow users to start and stop recording and transcription during a meeting or call. The recording and transcription will be stored in OneDrive or SharePoint and available in the meeting chat or channel conversation. For more details, see Record a meeting in Microsoft Teams.

Turn on the transcription and captions settings in the Teams admin center. This will enable automatic transcription and captions for meeting recordings. Users can play back the recordings with closed captions and review the transcript in the Recording & Transcripts tab in Teams. For more details, see Configure transcription and captions for Teams meetings.

Turn on the live transcription settings in the Teams admin center. This will allow users to view live transcription during a meeting or call. Users can also download the transcript after the meeting or call. For more details, see View live transcription in Microsoft Teams meetings.

To restrict Teams bandwidth by network range, you can use the Network Roaming Policy feature1. This feature allows you to define different media bit rate settings for different network locations based on the IP address ranges. Here are the steps to accomplish your task:

Create a new network roaming policy with the desired media bit rate settings. For example, you can use the following PowerShell cmdlet to create a policy named “MiamiPolicy” with a maximum bit rate of 1000 Kbps for audio and video:

New-CsTeamsNetworkRoamingPolicy -Identity "MiamiPolicy" -MaxMediaBitRateKb 1000

Assign the network roaming policy to the network range of the Miami office. You can use the following PowerShell cmdlet to assign the policy to the 10.10.10.0/24 network range:

New-CsTeamsNetworkRoamingPolicyAssignment -PolicyName "MiamiPolicy" -IPAddressRange "10.10.10.0/24"

Verify that the policy is applied correctly by using the Get-CsTeamsNetworkRoamingPolicyAssignment cmdlet. You should see something like this:

Identity : 10.10.10.0/24

PolicyName : MiamiPolicy

IPAddressRange : 10.10.10.0/24

EffectiveTime : 8/1/2023 1:18:24 PM

LastUpdateTime : 8/1/2023 1:18:24 PM

LastUpdateBy : admin@XXXXXXXXXXX.onmicrosoft.com

LastUpdateBySid : S-1-5-21-XXXXXXXXXX-XXXXXXXXXX-XXXXXXXXXX-XXXXX

Note: You may need to wait for some time for the policy to take effect.

To ensure that content on Microsoft SharePoint Online sites can be shared only with new and existing guest users, you need to limit the external sharing settings in the SharePoint admin center. Here are the steps to follow:

Sign in to the SharePoint admin center with your admin credentials.

Go to Policies > Sharing.

Under External sharing, drag the SharePoint slider down to New and existing guests. (The OneDrive slider is dependent on SharePoint and will also be set to New and existing guests.)

Under More external sharing settings, check the box Allow only users in specific security groups to share externally and select Manage security groups.

Add the security groups that contain the users who are allowed to share content with guest users. You can also create a new security group if needed.

Click Save to apply the settings.

To ensure that all unused teams expire and are deleted automatically, you need to configure a Microsoft 365 group expiration policy. This policy applies to teams because they are backed by groups. Here are the steps to follow:

Sign in to the Microsoft 365 admin center with your admin credentials.

Go to Groups > Expiration.

Turn on the Enable expiration toggle.

In the Group lifetime box, enter 365 days or select it from the drop-down list. This means that the teams will expire 365 days from their creation date.

In the Select group types to apply the policy section, check the Teams box. You can also select other group types if you want.

In the Choose how to handle owners of groups without owners section, enter adminLOD-Se551723.onmicrosoft.com as the email address to receive notifications for the expiration of orphaned teams. You can also add more email addresses if you want.

Click Save to apply the policy.

That’s it. You have successfully configured a group expiration policy for teams. This policy will automatically delete the teams that are not renewed by their owners before the expiration date. You can also view and restore the deleted teams within 30 days from the Deleted groups page in the admin center.

To ensure that when users dial emergency numbers, the call is routed based on the user’s current location, you need to enable the external location lookup mode in Teams. This mode allows Teams to use the location services of the device’s operating system to suggest an emergency address for the user. The user can then confirm, edit, or enter a new address, which will be used to route the emergency call to the appropriate Public Safety Answering Point (PSAP). Here are the steps to follow:

Sign in to the Teams admin center with your admin credentials.

Go to Voice > Emergency policies.

Select Add.

Enter a name for the emergency calling policy, for example, “E911WFH”.

Turn on External location lookup mode.

Select Apply to create the policy.

To assign the policy to the users who need it, go to Users on the left menu and select the users that you want to apply the policy to. You can use the filters or the search box to find them.

On the right pane, under Policies, select Edit next to Emergency calling policy.

Choose the policy that you created from the drop-down list and click Apply.

To restrict external Teams communication for both calling and personal chat to only organizational users that use the microsoft.com domain, you need to use the Teams admin center to configure the external access settings. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password.

In the left navigation, go to Org-wide settings > External access.

Under External access, turn on the toggle for Users can communicate with other Skype for Business and Teams users.

Under Cross-tenant access settings, click Manage settings.

In the Cross-tenant access settings pane, under Calling and chat, select Allow specific domains and then enter microsoft.com in the box below. This will allow your users to communicate with Microsoft users via calling and chat.

Click Save.

Note: You also need to make sure that microsoft.com has configured their external access settings to allow communication with your domain. See Communicate with users from other organizations for more details.

To enable shared channel collaboration with microsoft.com, you need to use the Teams admin center to configure the channel policy and the cross-tenant access settings. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Teams > Teams update policies.

Select an existing policy or create a new one by clicking Add.

In the Update policy pane, under Shared channels, turn on the toggles for Allow shared channel creation and Allow external shared channel participation. This will allow users to create shared channels and participate in shared channels created by microsoft.com.

Click Save and then Close.

In the left navigation, go to Org-wide settings > External access.

Under Cross-tenant access settings, click Manage settings.

In the Cross-tenant access settings pane, under Shared channels, select Allow specific domains and then enter microsoft.com in the box below. This will allow users to invite Microsoft contacts to shared channels created by your company.

Click Save.

Note: You also need to make sure that microsoft.com has configured their cross-tenant access settings to allow shared channel collaboration with your domain. See Collaborate with external participants in a channel2 for more details.

To prevent users from deleting messages posted in private chats and channels, you need to manage the messaging policies in Teams. Here are the steps to follow:

Sign in to the Teams admin center with your admin credentials.

Go to Teams apps > Messaging policies.

Select the policy that you want to modify, such as the global (Org-wide default) policy or a custom policy.

Turn off the following settings: Owners can delete sent messages, Users can delete sent messages, and Users can edit sent messages.

Click Save to apply the changes.

To set Microsoft SharePoint as the only cloud storage option for all teams, you need to use the Teams admin center to disable the third-party cloud storage services. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Org-wide settings > Services & add-ins.

Under Cloud file storage, click Manage.

In the Cloud file storage pane, turn off the toggles for Box, Dropbox, Google Drive, and Citrix ShareFile. This will disable these services for all teams and users in your organization.

Click Save.

Now, Microsoft SharePoint will be the only cloud storage option for all teams. Users will be able to access SharePoint files from the Files tab in each team channel or from the Files app on the left side of Teams.

https:// docs.microsoft.com/en-us/azure/active-directory/b2b/delegate-invitations

https://docs.microsoft.com/en-us/microsoftteams/manage-external-access https://doc s.microsoft.com/en-us/azure/active-directory/b2b/allow-deny-list