Nutanix NCP-MCA - Nutanix Certified Professional - Multicloud Automation (NCP-MCA 6.10) Exam

Scaling VM replica settings allow you to specify the minimum, maximum, and default number of VMs that can be created from a blueprint service. The minimum and default values must be equal to or greater than the number of VMs needed at any time and at time of deployment, which is 2 in this case. The maximum value must be equal to or less than the project quota divided by the VM resources, which is 100/12 = 8 for vCPUs and 300/24 = 12 for memory. The lowest of these two values is the limit for the maximum value, which is 8. Therefore, the only option that meets all the requirements is B. MIN: 2, MAX: 7, Default: 2.

References:

Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, page 10, Objective 3.1: Given a scenario, create a blueprint to deploy infrastructure and applications using Self-Service

Nutanix Multicloud Automation Administration (NMCAA), Module 5: Self-Service, Lesson 5.2: Blueprint Design, slide 23: Scaling VM Replica Settings

Nutanix Certified Professional Multicloud Automation (NCP-MCA) 6 Exam, page 10, Objective 3.1: Given a scenario, create a blueprint to deploy infrastructure and applications using Self-Service

 A macro is a placeholder for a value that is resolved at runtime. Macros can be used to reference various Calm objects, such as variables, secrets, credentials, tasks, and services. The correct syntax for using a macro within a Calm blueprint is @@{calm.object}(@@, where calm.object is the name of the object to be referenced. For example, @@{username}(@@ would resolve to the value of the username variable at runtime. The other options are incorrect syntaxes for macros and would not be resolved by Calm. References: Nutanix Certified Professional - Multicloud Automation (NCP-MCA) v6.5, Nutanix Certified Professional - Multicloud Automation (NCP-MCA) 6 Exam, Nutanix Certified Professional - Multicloud Automation

To create and execute a scaling action using Calm, the administrator should create the action under the service profile section of the blueprint and the application profile section of the blueprint. The service profile section defines the properties and actions of each service in the blueprint, such as the VM configuration, the scripts to run, and the scaling parameters. The application profile section defines the properties and actions of the entire application, such as the number of instances, the dependencies, and the scaling triggers. The administrator can then execute the scaling action in the Overview tab or the Services tab of the application, depending on the scope of the scaling action. References:

Nutanix Certified Professional - Multicloud Automation, Page 18

Nutanix Calm User Guide

Nutanix Calm User Guide

Nutanix Calm User Guide

Nutanix Calm User Guide

The error message “INTERNAL_ERROR: ErrorCode: 9” typically indicates an issue with the SSH service on the VMs. In this context, where a playbook is being executed to shut down Linux VMs, it’s essential that the SSH service is running to allow for remote management and execution of commands. If the SSH service isn’t running, the playbook won’t be able to execute commands on the VMs, leading to an internal error.

References:

Nutanix Multicloud Automation Administration (NMCAA) Course, Module 3: X-Play, Lesson 3.3: Creating and Managing Playbooks, Slide 19: Action Settings

Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, Section 3: Validate Blueprints, Playbooks, and Automation Settings, Objective 3.3: Determine the correct method to validate required Playbook configurations

UESTION NO: 80

An administrator is unable to launch a Calm blueprint (new and old). Launching an existing blueprint under this condition fails with the error message:

The project for this blueprint does not have any associated Nutanix account.

Downloading and uploading the new blueprint also fails with

Launch with Variables' Profile expected to fall as Windows Server VWs attached with deleted Account.

Please modify them to use different account and try again.

Why is the administrator seeing this issue?

A. The account is in a failed state.

B. The has not been created.

C. The account is not verified.

D. The account been deleted.

Answer: D

The error messages indicate that the blueprint is trying to use a Nutanix account that no longer exists. This could happen if the account was deleted by another administrator or by a playbook action. The administrator should check the project settings and verify that the Nutanix account is still available and associated with the project. If not, the administrator should create a new account or use an existing one and update the blueprint accordingly. References: Nutanix Certified Professional - Multicloud Automation (NCP-MCA) 6.5 Exam Blueprint Guide, page 9; Nutanix Certified Professional - Multicloud Automation (NCP-MCA), section 3; Nutanix NCP-MCA Certification Exam Sample Questions, question 80.

The error “Connection refused” can occur due to several reasons but in the context of running a script through Calm on VM, it is most likely caused by firewall restrictions or insufficient permissions. Option A suggests that the VM port is not allowed by the firewall, meaning that the firewall settings are preventing the connection. This could be because specific ports needed for the script to run are being blocked. Option B indicates that the credentials have insufficient permissions, meaning that the user or system trying to execute the script does not have the necessary permissions to establish a connection. Option C is unlikely because the VM should be ready before the script is executed. Option D is possible but not specific enough to explain the connection issue. References: You can find more information about this topic in the following sources:

Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, Section 3 - Validate Blueprints, Runbooks, Playbooks, and Automation Settings, page 9

Nutanix Multicloud Automation Administration (NMCAA), Module 5 - Troubleshooting, Lesson 1 - Troubleshooting Calm, page 5-4

To enable Calm, the administrator needs to log on to Prism Central with a local ADMIN account and click Services -> Calm -> Enable. This will install the Calm service on Prism Central and allow the administrator to access the Calm UI and features. The other options are incorrect because they either refer to Prism Element, which is not the correct platform for Calm, or they involve unnecessary or incorrect steps. References: [Enabling and Accessing Calm | Nutanix Community] (https://next.nutanix.com/installation-configuration-23/enabling-and-accessing-calm-40191); [Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide] (https://www.nutanix.com/content/dam/nutanix/resources/support/ds-ncp-mca.pdf), section 2.1.

According to the Nutanix Calm Administration Guide1, the minimum system requirements for Prism Central are 32 GB of RAM and 8 vCPUs. If the production Prism Central has less than the minimum RAM, it may affect the performance of Calm and other services running on Prism Cen

The error message "A specified logon session does not exist. It may already have been terminated" is often caused by the lack of CredSSP (Credential Security Support Provider) being enabled on the Windows Operating System. CredSSP is necessary for certain remote operations, including executing PowerShell scripts remotely.

References:

Microsoft documentation on Enabling CredSSP.

Nutanix documentation on Troubleshooting PowerShell Scripts.

 The alert in Prism Central indicates that Calm showback is not able to reach the beam service. This could be due to network connectivity issues or incorrect configurations. The administrator should check the DNS configuration in Prism Central (Option A) to ensure that it is correctly configured to allow communication with the Beam service. Additionally, checking if Prism Element is configured with Proxy settings (Option C) is essential as it can also affect the communication between Calm and Beam. Pulse (Option B) and Flow (Option D) are not related to the Calm showback feature and do not impact its functionality.

References:

Nutanix Certified Professional - Multicloud Automation (NCP-MCA) v6.5, Section 2 - Deploy and Configure Nutanix Calm and Related Components, Objective 2.4 - Identify required configuration settings for a Nutanix Calm deployment

Enabling and Disabling Showback in Calm | Nutanix Community

 A time trigger is a type of playbook trigger that allows the user to specify a schedule for running a playbook. This trigger is useful for automating tasks that need to be performed periodically or at a specific time. A manual trigger requires the user to initiate the playbook execution manually, which is not ideal for a recurring task. A report trigger is a type of playbook trigger that allows the user to run a playbook when a specific report is generated. However, this trigger does not guarantee that the report will be generated on the first of every month, as it depends on the report settings. A wait until day of month action is a type of playbook action that pauses the playbook execution until a specified day of the month. This action is unnecessary if the playbook already has a time trigger that specifies the desired schedule.

References:

Nutanix Multicloud Automation Administration (NMCAA) course, Module 4: Playbooks, Lesson 4.1: Playbook Triggers

Nutanix Certified Professional - Multicloud Automation (NCP-MCA) 6.5 Exam Blueprint Guide, Section 3.1: Create a playbook to automate IT operations using X-Play