CompTIA XK0-005 - CompTIA Linux+ Exam

The lvs command can be used to obtain a list of all volumes that are part of a volume group. This command will display information such as the name, size, attributes, and volume group of each logical volume in the system. The vgs command can be used to obtain a list of all volume groups in the system, not the volumes. The fdisk -1 command is invalid, as -1 is not a valid option for fdisk. The pvs command can be used to obtain a list of all physical volumes in the system, not the volumes. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Disk Storage, page 461.

The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88 to address the issue. The /etc/hosts file is a file that maps hostnames to IP addresses on Linux systems. The file can be used to override the DNS resolution and provide a local lookup for hostnames. The dig output shows that the DNS returns the IP address 192.168.20.88 for the hostname db.example.com, which is the correct IP address of the system. The grep output shows that the /etc/hosts file contains an entry for db.example.com with the IP address 192.168.20.89, which is the wrong IP address of the system. This can cause a conflict and prevent the system from being accessed by the hostname. The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88, which is the correct IP address of the system. This will align the /etc/hosts file with the DNS and allow the system to be accessed by the hostname. The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88 to address the issue. This is the correct answer to the question. The other options are incorrect because they either do not modify the /etc/hosts file (modify the /etc/network file and change the db.example.com entry to 192.168.20.88 or modify the /etc/network file and change the db.example.com entry to 192.168.20.89) or do not change the IP address to the correct one (modify the /etc/hosts file and change the db.example.com entry to 192.168.20.89). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 378.

The mount /dev/sdb1 /media/usb command will mount the USB drive to /media/usb. This command will attach the filesystem on the first partition of the USB drive (/dev/sdb1) to the mount point /media/usb, making it accessible to the system. The mount /dev/sdb0 /media/usb command is invalid, as there is no such device as /dev/sdb0. The mount /dev/sdb /media/usb command is incorrect, as it will try to mount the entire USB drive instead of its partition, which may cause errors or data loss. The mount -t usb /dev/sdb1 /media/usb command is incorrect, as usb is not a valid filesystem type for mount. References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Disk Storage, page 455.

The systemct1 reboot command will restore the server to its usual target by rebooting it. This will cause the server to load the default target specified in /etc/systemd/system.conf or /etc/systemd/system/default.target files. The telinit 0 command would shut down the server, not restore it to its usual target. The systemct1 get-default command would display the default target, not change it. The systemct1 emergency command would switch the server to emergency.target mode, which is even more restrictive than rescue.target mode. References: [CompTIA Linux+ (XK0-005) Certification Study Guide], Chapter 17: System Maintenance and Operation, page 516.

To prevent certain files from being tracked by Git, the administrator can use a .gitignore file (B) in the repository. The .gitignore file can specify patterns of files or directories that Git should ignore. This way, the Terraform state files will not appear in the main branch or any other branch. The other commands are not related to this requirement. References:

[CompTIA Linux+ Study Guide], Chapter 10: Working with Git, Section: Ignoring Files with .gitignore

[How to Use .gitignore File]

The ss command is used to display information about socket connections, such as the port number, state, and process ID. The error message indicates that the port 80 is already in use by another process, which prevents the Apache web server from binding to it. By using the ss command with the -l and -n options, the administrator can list all the listening sockets and their port numbers in numeric form, and identify which process is using the port 80. For example: ss -ln | grep :80. The ip, dig, and nc commands are not relevant for this issue, as they are used for different purposes, such as configuring network interfaces, querying DNS records, and testing network connectivity.

The administrator should use the command kill -TERM to forcibly stop the process. The kill command is a tool for sending signals to processes on Linux systems. Signals are messages that inform the processes about certain events and actions. The processes can react to the signals by performing predefined or user-defined actions, such as terminating, suspending, resuming, or ignoring. The -TERM option specifies the signal name or number that the kill command should send. The TERM signal, which stands for terminate, is the default signal that the kill command sends if no option is specified. The TERM signal requests the process to terminate gracefully, by closing any open files, releasing any resources, and performing any cleanup tasks. However, if the process does not respond to the TERM signal, the kill command can send a stronger signal, such as the KILL signal, which forces the process to terminate immediately, without any cleanup. The administrator should use the command kill -TERM to forcibly stop the process. This is the correct answer to the question. The other options are incorrect because they either do not terminate the process (kill -1 or kill -3) or do not terminate the process forcibly (kill -15 or kill -HUP). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 14: Managing Processes, page 431.

The language that the playbook should be written in is YAML. YAML stands for YAML Ain’t Markup Language, which is a human-readable data serialization language. YAML is commonly used for configuration files and data exchange. YAML uses indentation, colons, dashes, and brackets to represent the structure and values of the data. YAML also supports comments, variables, expressions, and functions. Ansible is an open-source tool for automating tasks and managing configuration on Linux systems. Ansible uses YAML to write playbooks, which are files that define the desired state and actions for the systems. Playbooks can be used to automate the installation of patches on several Linux systems by specifying the hosts, tasks, modules, and parameters. The language that the playbook should be written in is YAML. This is the correct answer to the question. The other options are incorrect because they are not the languages that Ansible uses for playbooks (SQL, HTML, or JSON). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 549.

The command that will allow the technician to execute the services and continue deploying other microservices within the same terminal session is bg %1 job name. This command will send the job with ID 1 and name job name to the background, where it will run without occupying the terminal. The other options are incorrect because:

gedit & disown will launch a graphical text editor in the background and detach it from the terminal, but it will not execute any service.

kill 9 %1 will terminate the job with ID 1 using a SIGKILL signal, which cannot be ignored or handled by the process.

fg %1 will bring the job with ID 1 to the foreground, where it will occupy the terminal until it finishes or is stopped. References: CompTIA Linux+ Study Guide, Fourth Edition, page 181-182.

The command firewall-cmd --query-service http will accomplish the task of checking whether web traffic has already been allowed through the firewall. The firewall-cmd command is a tool for managing firewalld, which is a firewall service that provides dynamic and persistent network security on Linux systems. The firewalld uses zones and services to define the rules and policies for the network traffic. The zones are logical groups of network interfaces and sources that have the same level of trust and security. The services are predefined sets of ports and protocols that are associated with certain applications or functions. The --query-service http option queries whether a service is enabled in a zone. The http is the name of the service that the command should check. The http service represents the web traffic that uses the port 80 and the TCP protocol. The command firewall-cmd --query-service http will check whether the http service is enabled in the default zone, which is usually the public zone. The command will return yes if the web traffic has already been allowed through the firewall, or no if the web traffic has not been allowed through the firewall. This is the correct command to use to accomplish the task. The other options are incorrect because they either do not exist (firewalld query-service-http or firewalld --check-service http) or do not query the service (firewall-cmd --check-service http instead of firewall-cmd --query-service http). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12: Managing Network Connections, page 392.