Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

Brocade 143-085 - Brocade Certified Fabric Professional Gen 5

Brocade 143-085 Premium Access     Download Demo    
Page: 2 / 3
Total 91 questions

Your company acquires a new data center 100 km away. You decide to use an FCIP-shared infrastructure instead of dark fiber.

What are two advantages? (Choose two.)

A.

FCIP has less protocol overhead.

B.

FCIP leverages your investment in the IP infrastructure.

C.

Less fiber is required.

D.

FCIP uses jumbo frames.

You are configuring an FCIP tunnel with four circuits. Two of the circuits will be active and the other two will be in standby in case of failure. You want to ensure that there are always at least two active circuits in the event of a failure.

Which two steps will accomplish this task? (Choose two.)

A.

Configure all the circuits as metric 1.

B.

Configure two circuits as metric 1 and two circuits as metric 0.

C.

Configure two failover groups consisting of a metric 1 and a metric 0 circuit per group.

D.

Configure two failover groups consisting of two metric 1 circuits in one group and two metric 0 circuits in the second group.

You want to implement trunking. You are using in-flight encryption on a Brocade 6510 switch using 16 Gbps SFPs in your fabric.

What is the maximum number of ports per trunk that is supported?

A.

2

B.

4

C.

8

D.

16

Which requirement must be met to enable Access Gateway mode?

A.

Ensure the switch has an Access Gateway license installed.

B.

Ensure all Ports on Demand licenses are installed.

C.

Ensure the switch is licensed for Extended Fabric.

D.

Ensure all ports are enabled.

You decide to implement F_Port trunking in your Gen 5 fabric.

Which two statements are true? (Choose two.)

A.

You can configure F_Port trunking between F_Ports on a Fabric OS switch and N_Ports on an Access Gateway.

B.

You can configure F_Port trunking on the F_Ports of an Access Gateway.

C.

You can configure F_Port trunking between F_Ports on a Fabric OS switch and N_Ports on a Brocade adapter.

D.

You can configure F_Ports to be E_ports with F_Port trunking on a Fabric OS switch.

Refer to the exhibit.

How many ICL trunks are shown in the exhibit?

A.

2

B.

4

C.

8

D.

16

You need to deploy FC-FC routing between two Gen 5 edge fabrics across an FCIP link. Each edge fabric contains a single Brocade 6520 switch. Your backbone fabric consists of two Brocade 7800 Extension Switches.

How do you enable FC-FC routing using FCIP?

A.

Configure E_Ports between the 7800s and VE_Ports on each edge fabric connecting to EX_Ports in the backbone.

B.

Configure VE_Ports between the 7800s and VE_Ports on each edge fabric connecting to VEX_Ports in the backbone.

C.

Configure VEX_Ports between the 7800s and E_Ports on each edge fabric connecting to EX_Ports in the backbone.

D.

Configure VE_Ports between the 7800s and E_Ports on each edge fabric connecting to EX_Ports in the backbone.

Refer to the exhibit.

FC-FC routing is properly configured between Switch 1 and Switch 2. You have configured the EX_Port that will be attached to Switch 3 using a front Domain ID of 1 and a Fabric ID of 100.

When you connect the cable between Switch 1 and Switch 3, as shown in the exhibit, the connection segments.

What is the cause?

A.

The EX_Port is administratively disabled.

B.

The Fabric ID is set incorrectly.

C.

The front Domain ID is set incorrectly.

D.

FC-FC routing must be enabled on Switch 3.

You have an FC-FC routed SAN environment and have many servers booting over SAN.

To ensure the routed targets are imported to a routed fabric before the host is online, what should be used?

A.

LSAN Enforce tag

B.

LSAN Speed tag

C.

LSAN Zone Binding

D.

Designated Router Port Selection

Refer to the Exhibit.

As shown in the exhibit, the translate domain is not present in the FC-FC routed fabric. LSAN definitions have been confirmed.

What is the cause?

A.

Host A is member of multiple LSAN zones.

B.

Host A is not logged into the edge fabric.

C.

Storage B is logged into the backbone fabric.

D.

Host A's PWWN is a member of a TI zone.