Brocade 150-820 - Brocade Certified Ethernet Fabric Professional 2015
Which three steps are required for a firmware upgrade from a USB flash drive? (Choose three.)
Your customer wants their Brocade VCS Fabric to participate in a loop-free network when connecting to other switches.
Which three protocols are supported? (Choose three.)
Which extension to the TRILL protocol allows a Brocade VCS Fabric to scale beyond 4096 VLANs?
Which feature simplifies deployment of QoS for IP-based storage in a Brocade VCS Fabric?
You are introducing a Brocade VCS Fabric to your network and want to implement a non-modular, top of rack switch with at least 40 GbE uplinks to the core.
Which switch would you use?
You want to implement VRRP-E between a Brocade VDX 6740, and a Brocade VDX 6730 with the protocol vrrp command.
Which two statements are true? (Choose two.)
Which item is unique about a Brocade SilkWorm 2800 switch that is part of a Brocade VCS Fabric?
Your customer wants to take advantage of Brocade trunking to optimize the data backups over their Brocade VCS Fabric. The fabric will consist of four devices as shown in the exhibit.
The chassis are using the LC48X10G line cards.
Which two statements are correct? (Choose two.)
You are attempting to merge two Brocade VDX switches running in fabric mode, but they segment.
sw0# show fabric islports
Name: sw0
Type: 96.5
State: Online
Role: Fabric Principal
VCS Id: 10
Config Mode:Distributed
Rbridge-id: 4
WWN: 10:00:00:05:33:91:48:f7
FCF MAC: 00:05:33:91:48:f7
sw0# show fabric islports
Name: sw0
Type: 96.5
State: Online
Role: Fabric Principal
VCS Id: 2
Config Mode:Distributed
Rbridge-id: 20
WWN: 10:00:00:05:33:90:92:e4
FCF MAC: 00:05:33:90:92:e4
Referring to the exhibit, what is the reason?
You added a new Brocade VDX 6740 to an existing Brocade VCS Fabric in your data center. You connected the VDX 6740 to ports 3/0/11 and 3/0/12 on the existing fabric. After the switch boots, you realize it does not join the fabric. You examine the ISL status on the fabric as shown in the exhibit.
sw0(conf-if-te-3/0/19)# do sh fabric islport
Name: sw0
Type: 95.2
State: Online
Role: Fabric Principal
VCS Id: 1
Config Mode:Distributed
Rbridge-id: 3
WWN: 10:00:00:05:33:46:71:61
FCF MAC: 00:05:33:46:71:61
Index Interface State Operational State
===================================================================
0 Te 3/0/1 Down
1 Te 3/0/2 Down
2 Te 3/0/3 Down
3 Te 3/0/4 Down
4 Te 3/0/5 Down
5 Te 3/0/6 Down
6 Te 3/0/7 Down
7 Te 3/0/8 Up ISL 10:00:00:05:33:5c:e1:5a "sw0" (downstream)(Trunk Primary)
8 Te 3/0/9 Up ISL (Trunk port, Primary is 3/0/8 )
9 Te 3/0/10 Down
10 Te 3/0/11 Up ISL (Trunk port, Primary is 3/0/12 )
11 Te 3/0/12 Up ISL segmented,(ESC mismatch, Config Mode)(Trunk Primary)
12 Te 3/0/13 Down
13 Te 3/0/14 Down
14 Te 3/0/15 Down
15 Te 3/0/16 Down
16 Te 3/0/17 Down
17 Te 3/0/18 Down
18 Te 3/0/19 Down
19 Te 3/0/20 Down
20 Te 3/0/21 Down
21 Te 3/0/22 Down
22 Te 3/0/23 Down
23 Te 3/0/24 Down
What is causing the problem?
