Spring Sale Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmas50

Brocade 150-820 - Brocade Certified Ethernet Fabric Professional 2015

Page: 5 / 6
Total 182 questions

You have two Brocade VDX 6740 switches with cables connected in ports 15-18 and ports 31-34 in each switch to form ISLs between them.

How many trunks will form?

A.

1

B.

3

C.

4

D.

8

You have a Brocade VDX switch in production and you must save a backup copy of the running configuration to a remote location.

What are two ways to accomplish this task? (Choose two.)

A.

Use TFTP.

B.

Use SCP.

C.

Use FTP.

D.

Use SSL.

Your customer has just implemented a Brocade VCS Fabric at the aggregation layer that interfaces with core and edge switches running RSTP. The Linux servers are detecting BPDUs at their interfaces confirmed by using the tcpdump command from a server. You want to prevent this traffic.

Which two parameters should be configured to accomplish this task? (Choose two.)

A.

edgeport

B.

guard root

C.

portfast

D.

BPDU filter

A customer has a four-port vLAG between two VDX switches and a server. Two of the four links are up but the vLAG will not come up.

VDX8770_3-131# show interface po 710

Port-channel 710 is up, line protocol is down (link protocol down)

Hardware is AGGREGATE, address is 0005.33d4.0d2c

Current address is 0005.33d4.0d2c

Interface index (ifindex) is 671089350

Minimum number of links to bring Port-channel up is 3

MTU 2500 bytes

LineSpeed Actual : Nil

Allowed Member Speed : 10000 Mbit

Priority Tag disable

IPv6 RA Guard disable

Last clearing of show interface counters: 2d05h53m

Queueing strategy: fifo

Receive Statistics:

0 packets, 0 bytes

Unicasts: 0, Multicasts: 0, Broadcasts: 0

64-byte pkts: 0, Over 64-byte pkts: 0, Over 127-byte pkts: 0

Over 255-byte pkts: 0, Over 511-byte pkts: 0, Over 1023-byte pkts: 0

Over 1518-byte pkts(Jumbo): 0

Runts: 0, Jabbers: 0, CRC: 0, Overruns: 0

Errors: 0, Discards: 0

Transmit Statistics:

0 packets, 0 bytes

Unicasts: 0, Multicasts: 0, Broadcasts: 0

Underruns: 0

Errors: 0, Discards: 0

Rate info (interval 299 seconds):

Input 0.000000 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Output 0.000000 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Time since last interface status change: 2d05h53m

What should the customer do to bring the vLAG online?

A.

Change the vLAG port channel speed.

B.

Reduce the number of ports in the vLAG.

C.

Change the minimum link requirement to 2.

D.

Turn on the ignore split option.

You want to determine which link aggregation mode you should choose between a pair of Brocade VDX switches in different VCS Fabrics. You want to use frame-based distribution.

Which action should you perform?

A.

Enable a Brocade LAG.

B.

Enable a vLAG.

C.

Enable an LACP LAG.

D.

Enable a fabric ISL.

You have three Brocade VCS Fabrics linked together and have enabled ELD.

Referring to the exhibit, which link would be blocked?

A.

the link between a1 and b1

B.

the link between b2 and c2

C.

the link between a2 and c1

D.

the link between a3 and a4

You are an administrator at a cloud-based provider. You need a solution that provides L3 multi-tenancy to enable separate resources to be used by your customers.

Which feature would resolve this problem?

A.

VRRP-E

B.

Virtual Fabrics

C.

VRF

D.

PBR

Discards are incrementing on an ISL in your Brocade VCS fabric due to tail drops.

Which condition would cause this problem?

A.

faulty cable

B.

faulty optic

C.

missing VE configuration

D.

network congestion

Brocade Network Advisor has notified you that one of your ISLs between two Brocade VDXs is reporting a high number of errors. You log into the switch and clear the counters. You notice that the CRC and error counters are incrementing at a high rate.

What do these two errors indicate? (Choose two.)

A.

congestion problems

B.

broadcast storm

C.

optic problems

D.

cable problems

You want to restore a configuration that was saved previously from the FTP server using this command:

copy ftp://anonymous:pass@10.255.1.89/VDX25-1-389.cfg running-config

The system responds with the error:

"Error while retrieving file over ftp. Please check the host IP address, user/password, and the permission and space left on the remote directory."

What is the problem?

A.

The command does not specify the correct protocol for copying the VDX configuration.

B.

The command should specify the running configuration first in the string.

C.

The copy command should specify the start up configuration.

D.

The configuration with the path and filename is not on the server.