Cisco 300-610 - Designing Cisco Data Center Infrastructure for Traditional and AI Workloads v1.2 (DCID 300-610)
A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning The automation must be able to operate in high-availability mode with active/active operation between hosts in dual data centers. Which configuration approach must the architect choose?
An engineer must create a Cisco UCS storage disk-group policy that provides high redundancy, fault tolerance, and improved read performance. The configuration must preserve data integrity if any two disks fail, use at least four disks, and maintain two parity blocks. The solution must also use striping to increase read bandwidth. Which RAID level must be selected?
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
A network architect is designing a storage network to connect to an existing IP network over 100G Ethernet ports for multiple hosts The architect decided to require iSCSI multipathmg to provide multiple routes between servers within the SAN and storage devices that reside within the IP network. Which requirement must be applied to the IP network switch that connects to the SAN environment where the hosts reside9
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
The device must notify its neighbors when the control plane is undergoing a restart.
The solution must suppress routing flaps in case of stateful switchovers.
Which solution must be implemented?
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?
Which set of actions ensures that the Cisco UCS network configuration contains the required VLAN settings and that those settings are consistently applied through the service profile templates?
An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.
Which two settings must be selected to meet these requirements? (Choose two.)
An architect must automate routine tasks within a data center The data center exclusively uses Cisco Nexus Series Switches The networking team lacks proper programming knowledge and prefers an automation solution that leverages NXOS commands Any configuration change must use HTTPS for transport due to a security compliance requirement. Which solution must the architect choose?
