Summer Sale Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmas50

Cisco 300-610 - Designing Cisco Data Center Infrastructure for Traditional and AI Workloads v1.2 (DCID 300-610)

Page: 1 / 9
Total 299 questions

Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

A.

9000 bytes

B.

2000 bytes

C.

2158 bytes

D.

2240 bytes

A customer is deploying a SAN based on Cisco MDS 9000 Series Switches. Each Inter-Switch Link must carry multiple VSANs at the same time. The access switch must share the same domain ID as the director switch to reduce the number of domain IDs needed in the fabric Drag and drop the operational port types from the right onto the boxes on the left to create a topology that meets these requirements. Not all port types are used. Port types are used more than once.

A set of virtual machines must be live migrated from a data center to a disaster recovery site. The data center and disaster recovery sites are connected through an Inter-Pod Network topology. The gateway address of the virtual machine is the same across the data center and disaster recovery. Which Cisco Nexus feature supports this requirement?

A.

VXLAN EVPN

B.

FabricPath

C.

FHRR

D.

VPLS

An architect is designing a storage solution for a Cisco UCS server infrastructure with these requirements:

• identical deployment of servers

• can add vHBAs to a group of servers

• configuration of servers stays synchronized

Which solution meets these requirements?

A.

service profile template

B.

global adapter policy

C.

WWPN pool

D.

updating vNIC template

An architect is gathering technical requirements tor a large-scale data center with up to 3000 Ethernet ports and 70 ToR switches. The stakeholders agreed that it a ToR switch becomes compromised via its management plane, access to the production data plane must not be possible tram that switch. Which type of management network must the architect recommend in the design?

A.

out-of-band dialup

B.

in-band Ethernet

C.

out-of-band Ethernet

D.

in-band dialup

The data center aggregation layer that uses IPv4 and IPv6 address space must act as a redundant Layer 3 gateway The solution must support a minimum of 240 virtual groups for an interface The data center aggregation layer hosts network devices from different vendors Which FHRP solution meets these requirements?

A.

HSRPv1

B.

VRRPV3

C.

VRRPv1

D.

HSRPv2

A Cisco engineer is using a PowerShell script to create a service profile template on Cisco UCS Manager. After defining the server pools and other templates, the engineer must ensure that the hosts are visible lo the northbound SAN network and storage initiators. Which configuration must be applied to enable this capability?

A.

Get-UcsApplianceCloud | Get-UcsVlan -name AppIianceVlan | Add-UcsVlanMemberPort -Switchld A -Slotld 1 -Portld 15

B.

Get-UcsApplianceCloud | Get-UcsVlan -Name AppIianceVlan | Add-UcsVlanMemberPortChannel -Switchld A -Portld $ap_pc.Portld

C.

Get-UcsMacPool -lies < handle or name > default | Add-UcsMacMemberBlock 00:25: B5: OO: A0:O0 00:25: B5:00:AO:08

D.

Swwpn.pool | Add-UcsWwnMemberBlock -From 20:00:00:24: B5:00:00:00 -To 20:00:00:24: B5:00:00:09

Refer to the exhibit. A Cisco engineer is configuring a Cisco UCS integrated infrastructure for SAP HANA that consists of 8 x Cisco UCS B/C480-M5 servers for SAP HAN A and 4 x Cisco UCS C240-M5 C-Series rack mount servers for storage. The rack servers are equipped with Cisco VIC 1225T. The engineer plans to install RHEL8. but the boot process is interrupted at installation because the iSCSl LUNs are not recognized by the VIC adapter. After proper Investigation, the engineer concludes that the initiator and target configuration that is programmed on the primary ISCSl VNIC to the operating system Is missing. What is the reason for the issue?

A.

The network interfaces are not configured.

B.

The Linux ISO image is not Cisco approved.

C.

The boot parameter lp=ibft is not set.

D.

The storage system is not reachable

What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

A.

Layer 3 interfaces can belong to multiple VRFs.

B.

VRF-Lite interfaces can be Layer 2.

C.

Overlapping IP addresses are permitted on different VRFs.

D.

Interfaces that belong to VRFs can be physical or logical.

E.

VRF-Lite interfaces support MPLS.

An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.

•The customer’s environment requires the script to authenticate before executing further actions.

•The customer’s security requirements mandate the use of HTTP transport.

•The automation team is familiar with parsing messages encoded in XML or JSON format.

Which solution meets these requirements?

A.

SNMPv3

B.

gRPC

C.

RESTCONF

D.

NX-API