VMware 5V0-22.23 - VMware vSAN Specialist v2

To upgrade the complete vSAN cluster as a single task, including firmware and drivers for its hardware, the vSAN administrator should select Remediate All through vLCM to upgrade all hosts in the cluster. This option allows the administrator to apply the image created by vLCM to all hosts in the cluster in a single operation, without having to manually remediate each host individually. The other options are not correct, as they do not perform the upgrade of the vSAN cluster as a single task. Placing all hosts in the vSAN cluster into Maintenance Mode is not necessary, as vLCM will automatically place each host into Maintenance Mode before applying the image. Staging the upgrade of the vSAN cluster through vLCM is only a preparatory step that downloads the image components to each host, but does not apply them. Manually remediating one host at a time in the vSAN cluster is not efficient, as it requires more user intervention and time. References: vSphere Lifecycle Manager (vLCM) on HPE; Lifecycle Management with vLCM in vSAN 7 Update 1

 To design a HCI Mesh solution with VMware vSAN and VMware vSphere High Availability (HA), two considerations that the architect should assess are: A minimum of three nodes are required within the client cluster for vSphere HA to work. This is because vSphere HA needs at least three nodes in a cluster to form a quorum and elect a master host that monitors the availability of other hosts and VMs. If there are less than three nodes in a cluster, vSphere HA cannot function properly and might fail to detect or respond to host or VM failures. If vSphere HA is to work with HCI Mesh, Datastore with All Paths Down (APD) must be configured to Power off and restart VMs. This is because APD is a condition that occurs when a storage device becomes inaccessible due to loss of physical connectivity, resulting in I/O errors or timeouts for VMs that use that device. When using HCI Mesh, APD can happen if the network connection between the client cluster and the server cluster is lost or disrupted, causing the remote datastore to become unavailable. To ensure that vSphere HA can restart the affected VMs on another host that has access to their storage, Datastore with APD must be set to Power off and restart VMs in the vSphere HA settings. The other options are not correct. A server vSAN cluster can serve its local datastore up to 15 client vSAN clusters, not five. This is the maximum number of client clusters that can mount a remote datastore from a server cluster using HCI Mesh. A client cluster can mount up to five remote datastores from one or more vSAN server clusters, not ten. This is the maximum number of remote datastores that can be mounted by a client cluster using HCI Mesh. References: VMware vSAN HCI Mesh; vSphere Availability; Handling All Paths Down (APD) Conditions

The Capacity Reserve feature in vSAN 8.0 OSA reduces the amount of capacity reserved for transient and rebuild operations by using a slack space threshold. This threshold is calculated based on the size of the largest component in the cluster and the number of failures to tolerate. If the used space on vSAN datastore exceeds the suggested slack space threshold, the feature will not operate properly and vSAN will revert to using the host rebuild reserve threshold. The other scenarios will not affect the Capacity Reserve feature. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 28

To make sure that Skyline online health will work for vSAN, two requirements must be met: enable CEIP and join the program, and have a working Internet connection. CEIP stands for Customer Experience Improvement Program, which is a voluntary program that collects anonymous product usage data from customers who participate in it. By enabling CEIP and joining the program, customers can benefit from Skyline online health, which provides proactivenotifications and recommendations for software and hardware issues based on VMware Analytics Cloud. A working Internet connection is also required for Skyline online health to communicate with VMware Analytics Cloud and receive online notifications. The other options are not requirements for Skyline online health. References: About the vSAN Skyline Health; Skyline Health

To upgrade multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters, the administrator can upgrade two witness node types: appliance witness node and nested witness node. An appliance witness node is a virtual ESXi host that runs on a physical ESXi host and contains the witness components of VM objects stored in the vSAN cluster. A nested witness node is a virtual ESXi host that runs on another virtual ESXi host and contains the witness components of VM objects stored in the vSAN cluster. Both types of witness nodes can be managed by vLCM as independent nodes since vSphere 7.0 Update 3, as long as they are version 7.0 Update 2 or later. The other options are not correct. A shared witness node is a witness node that serves multiple vSAN clusters, which is not supported by vLCM. A dedicated witness node is a witness node that serves only one vSAN cluster, which is not a specific type of witness node. A physical witness node is aphysical ESXi host that contains the witness components of VM objects stored in the vSAN cluster, which cannot be upgraded by vLCM. References: vSphere Lifecycle Manager and the vSAN Witness Hosts; Shared Witness for 2-Node vSAN Deployments

 If the administrator did not explicitly assign a storage policy when provisioning a new VM on a vSAN datastore, the result is that the VM objects will be protected based on the vSAN Default Storage Policy configurations. The vSAN Default Storage Policy is assigned to all VM objects if no other vSAN policy is assigned when provisioning a VM. The default policy contains vSAN rule sets and a set of basic storage capabilities, such as Failures to tolerate set to 1, Number of disk stripes per object set to 1, and Thin provisioning. The other options are not correct. The VM provisioning will not fail, as vSAN requires that every VM has at least one storage policy. The vSphere Web Client will not choose the last vSAN Storage Policy used, as it will always apply the default policy if no other policy is selected. No data protection will not be applied to the VM objects, as they will have at least one replica based on the default policy. References: About the vSAN Default Storage Policy; Using vSAN Policies

To shut down the vSAN cluster using the Shutdown Cluster Wizard, the administrator needs to turn off High Availability (HA) before starting the wizard. This is because HA monitors the cluster for host failures and attempts to restart the affected VMs on other hosts. If HA is not turned off, the cluster might register host shutdowns as failures and trigger unnecessary VM restarts, which can interfere with the graceful shutdown process. Therefore, the administrator should disable HA from the Configure tab of the cluster before using the Shutdown Cluster Wizard12 References: 1: Shut Down the vSAN Cluster Using the Shutdown Cluster Wizard 3 2: Manually Shut Down and Restart the vSAN Cluster 4

To satisfy the customer’s needs for high-performance, low-latency applications at edge locations, the best deployment option is to use a new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location and configure each application VM with a RAID-1 VM storage policy. This option will provide the following benefits:

All-flash clusters offer the highest performance and lowest latency for vSAN, as they use flash devices for both cache and capacity tiers. Flash devices have faster read and write operations than magnetic disks, and they also support advanced features such as deduplication, compression, and encryption.

OSA stands for One Socket Architecture, which means that each host has only one CPU socket with multiple cores. This reduces the licensing cost and complexity of vSphere and vSAN, as well as the power consumption and cooling requirements of the hosts. OSA also improves the performance of vSAN by eliminating the NUMA effect, which is the latency caused by accessing memory or devices across different CPU sockets.

RAID-1 is a mirroring technique that creates two copies of each data component and places them on different hosts. This provides high availability and fault tolerance for the application VMs, as they can survive the failure of one host or disk. RAID-1 also offers better performance than RAID-5 or RAID-6, as it does not incur any parity overhead or additional write operations.

The other options are not optimal for the customer’s needs, as they either sacrifice performance or capacity. Option A uses RAID-5, which is an erasure coding technique that splits each data component into three data segments and one parity segment, and distributes them across four hosts. This reduces the capacity consumption by 25%, but it also increases the write latency and network traffic, as each write operation requires four hosts to participate. Option C uses ESA, which stands for Enterprise Storage Architecture, which means that each host has two CPU sockets with multiple cores. This increases the licensing cost and complexity of vSphere and vSAN, as well as the power consumption and cooling requirements of the hosts. ESA also introduces the NUMA effect, which can degrade the performance of vSAN by adding latency to access memory or devices across different CPU sockets. Option D uses RAID-5 with ESA, which combines the disadvantages of both options A and C.

The impact to any virtual machine that was running on the failed host using vSANPolicy1 is that each virtual machine will be restarted on another vSAN host using vSphere HA. This is because vSANPolicy1 has a Failures to Tolerate setting of 1 failure - RAID-5 (Erasure Coding), which means that each object has four components (three data and one parity) distributed across four hosts. If one host fails, the object can still be accessed with the remaining three components,and vSphere HA will restart the virtual machine on another host. vSAN will also try to rebuild the missing component on another host, if there is enough capacity and resources. The other options are incorrect because they either assume that the object is unavailable or that the recovery process is delayed or impossible. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 16

VMware Cloud on AWS is a service that delivers a fully managed VMware SDDC on AWS infrastructure. It uses vSAN as the mandatory, primary storage for the SDDC clusters. vSAN provides a high-performance, resilient, and secure shared storage solution for the VMware Cloud on AWS environment. The other options are not correct, as vSAN is not mandatory or primary for them. VMware Horizon, VMware Aria Automation, and Tanzu Kubernetes Grid Integrated Edition can use vSAN as an optional or secondary storage solution, but they can also use other types of storage. References: , section 1.1; , section 1.2