VMware 5V0-22.23 - VMware vSAN Specialist v2

This is the sequence of steps recommended by VMware for manually restarting the vSAN cluster after a planned power outage. The steps are as follows:

Enable cluster member updates from vCenter Server only on one ESXi host. This will allow the host to receive the latest cluster membership information from vCenter Server and avoid any conflicts or inconsistencies with other hosts. The command to enable cluster member updates is esxcfg-advcfg -s 1 /VSAN/IgnoreClusterMemberListUpdates.

Run the python reboot helper script only on one ESXi host to recover the cluster. This will prepare the cluster for a manual restart by partitioning the cluster and ensuring that all hosts have consistent metadata. The command to run the python reboot helper script is python /usr/lib/vmware/vsan/bin/reboot_helper.py prepare.

Exit all hosts from maintenance mode. This will allow the hosts to resume normal operations and join the vSAN cluster. The command to exit maintenance mode is esxcli system maintenanceMode set -e false.

The other options are incorrect for the following reasons:

B, exit all hosts from maintenance mode, run the python reboot helper script only on one ESXi host to recover the cluster, and enable cluster member updates from vCenter Server on all ESXi hosts, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information. Enabling cluster member updates from vCenter Server on all ESXi hosts is also unnecessary and can cause conflicts or inconsistencies with other hosts.

C, exit all hosts from maintenance mode, enable cluster member updates from vCenter Server only on one ESXi host, and run the python reboot helper script only on one ESXi host to recover the cluster, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information.

D, enable cluster member updates from vCenter Server on all ESXi hosts, run the python reboot helper script on all ESXi hosts to recover the cluster, and exit all hosts from maintenance mode, is incorrect because enabling cluster member updates from vCenter Server on all ESXi hosts is unnecessary and can causeconflicts or inconsistencies with other hosts. Running the python reboot helper script on all ESXi hosts concurrently can also cause a race condition that can result in unexpected outcomes.

References:

Manually Shut Down and Restart the vSAN Cluster

Restart the vSAN Cluster

Using vSAN ESA and the new Storage pool configuration where all disks contribute to capacity is the correct answer because it allows the organization to take advantage of the new features in vSAN 8.0, such as improved I/O flow, better resiliency, and more efficient disk usage. With vSAN ESA, there is no need to create disk groups or designate cache disks, as all disks are treated as capacity disks and use a new algorithm to distribute data across them. This also simplifies the disk management and reduces the overhead of cache management. References:

VMware vSAN Specialist v2 Exam Preparation Guide, page 6

What’s New in VMware vSAN 8.0

An all-flash vSAN ESA cluster with four nodes can satisfy the storage policies that require FTT=2 (RAID-1 Mirroring) or FTT=2 (RAID-6 Erasure Coding). These policies mean that the cluster can tolerate two host failures while maintaining data availability and redundancy. RAID-1 Mirroring creates three replicas of each object across different hosts, while RAID-6 Erasure Coding splits each object into four data segments and two parity segments across different hosts. Both policies require at least four hosts in the cluster to meet the FTT=2 requirement. The other options are not correct. An all-flash vSAN ESA cluster with four nodes cannot satisfy the storage policies that require FTT=3 (RAID-1 Mirroring) or FTT=1 (RAID-5 Erasure Coding). These policies mean that the cluster can tolerate three or one host failure respectively, but they require more or less hosts than four to do so. RAID-1 Mirroring with FTT=3 requires at least six hosts in the cluster to create four replicas of each object, while RAID-5 Erasure Coding with FTT=1 requires at least three hosts in the cluster to split each object into two data segments and one parity segment. References: vSAN Express Storage Architecture; RAID Configurations, FTT, and Host Requirements

When adding a host to a vSAN cluster, it is recommended to create uniformly-configured hosts and reference the VMware Compatibility Guide. These actions will ensure that the host meets the hardware and software requirements for vSAN, and that it can work seamlessly with the existing hosts in the cluster. Uniformly-configured hosts have the same number and type of disk groups, cache devices, capacity devices, network adapters, and drivers. The VMware Compatibility Guide provides a list of certified components and firmware versions that are compatible with vSAN. The other options are not recommended, as they can cause disruption or degradation of the vSAN cluster services. Disabling vSAN performance service, vSphere Cluster Services, or vSphere High Availability (HA) can affect the monitoring, availability, and load balancing of the cluster.

To allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster, the administrator should use the vSAN HCI Mesh feature. This feature allows a vSAN cluster to consume storage resources from another vSAN cluster without requiring the hosts to be part of the same cluster. This way, the administrator can leverage the unused or underutilized storage capacity from another cluster and avoid purchasing new hardware or migrating VMs. The vSAN HCI Mesh feature also supports storage policies, encryption, deduplication and compression, and erasure coding across clusters12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 15 2: VMware vSAN 7 Update 1 - HCI Mesh 3

The three actions that the vSAN administrator should perform on the staging cluster prior to moving the vSAN nodes to the production cluster are:

Disable vSAN Services: This will stop any vSAN-related operations on the staging cluster, such as resynchronization, rebalancing, or repair. This will also prevent any new virtual machines from being created or migrated to the staging cluster.

Delete all Disk Groups: This will remove all disks from the vSAN cluster and erase all data on them. This will also free up the disks for use in the production cluster.

Delete all partitions from the capacity disks: This will ensure that there are no remnants of any previous vSAN configuration on the disks. This will also avoid any potential conflicts or errors when adding the disks to the production cluster.

Enabling File Services, marking the disks for partial reservation, and removing all capacity drives are not necessary or recommended actions for this scenario. Enabling File Services would add an unnecessary layer of complexity and overhead to the staging cluster. Marking the disks for partial reservation would reduce the available capacity for vSAN and potentially cause performance issues. Removing all capacity drives would leave only cache disks in the staging cluster, which would not be compatible with vSAN. References:

VMware vSAN Specialist v2 Exam Preparation Guide, page 10

The purpose of using the Operations Reserve option in the vSAN ReadyNode Sizer is to provide space for internal operations such as deduplication, compression, encryption, snapshots, clones, and rebalancing. The Operations Reserve is calculated as a percentage of the total usable capacity of the vSAN cluster. The default value is 30%, but it can be adjusted based on the expected workload characteristics and data services requirements. The other options are not correct, as they do not describe the Operations Reserve option. Configuring space for external operations, reserving space for tolerating failures, and allocating space for vSAN upgrades are not part of the Operations Reserve option. References: 2, section 2; , section 3

The correct answer is A, the disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device. This is because vSAN OSA uses a disk group configuration where one disk is designated as a cache disk and the rest are capacity disks. To replace the cache disk with a different type or size, the disk group must be deleted first, which will erase all data on the disks and trigger a resynchronization of the affected objects. The administrator should put the host in maintenance mode and choose the option to evacuate all data before deleting the disk group. After replacing the cache disk with the NVMe device, the administrator should recreate the disk group and exit maintenance mode. The other options are incorrect for the following reasons:

B, the disk group does not need to be removed before adding new cache, is incorrect because adding a new cache disk to an existing disk group is not supported in vSAN OSA. The cache disk can only be replaced by deleting and recreating the disk group.

C, the host must be removed from vSAN OSA cluster before changing cache devices, is incorrect because removing the host from the cluster is not necessary and will cause more disruption and data loss than putting the host in maintenance mode. Removing the host will also delete its disk groups and require re-adding them after rejoining the cluster.

D, the cache disk drives must have a larger capacity, is incorrect because there is no requirement for the cache disk to have a larger capacity than the existing one. The cache disk size should be determined by the workload characteristics and performance requirements, not by the expansion process. References:

VMware vSAN Specialist v2 Exam Preparation Guide, page 10

To configure vSAN Direct, the administrator must meet two requirements: a valid vSAN license for the vSAN cluster and unclaimed disks in the hosts for vSAN Direct. A vSAN license is required to enable vSAN features and services, including vSAN Direct. Unclaimed disks are local storage devices that are not used by vSAN or any other service, and can be claimed by vSAN Direct to create datastores for persistent storage. The other options are not requirements for vSAN Direct. HA is an optional feature that can be enabled on any cluster, but is not specific to vSAN Direct. A dedicated network for vSAN Direct is not necessary, as vSAN Direct uses the same network as vSAN. An integration with vSAN File Services is not required, as vSAN Direct does not provide file shares, but block storage. References: Set Up vSAN Direct for vSphere with Tanzu; vSAN Licensing Guide