Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

Cisco 648-238 - Implementing Cisco Connected Physical Security 1

Cisco 648-238 Premium Access     Download Demo    
Page: 5 / 5
Total 152 questions

Which camera and lens setup is correct to use IR lighting?

A.

color camera with IR corrected lens

B.

a camera with day/night mode and IR corrected lens

C.

a camera with day/night mode and varifocal lens

D.

color camera with varifocal lens

Which option lists video resolutions in order from lowest to highest (by pixel count)?

A.

D1, HD, QCIF, CIF

B.

D1, CIF, 4CIF, HD

C.

QCIF, CIF, D1, HD

D.

QCIF, D1, CIF, HD

Where should outdoor surveillance cameras be mounted when sources of light are nearby?

A.

Cameras should be mounted lower than the light source.

B.

Cameras should be mounted in parallel with the nearest light source.

C.

Cameras should be mounted above the light source.

D.

Location does not matter, as long as the cameras are day/night capable.

Which switch port capability is recommended for an MSP server?

A.

Server switch ports should have 10/100 Mb capability

B.

Server switch ports should have 1000 Mb capability

C.

Server switch ports should have 10 Gb capability

D.

Servers should be connected to PoE-capable switches

Refer to the exhibit.

Cameras and a Cisco VSM server are connected to a Layer 2 switch. Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.)

A.

GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command.

B.

GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command.

C.

Implement "router-on-a-stick".

D.

Implement inter-VLAN routing.

E.

The link between GigE 0/5 and FE 1/1 should be configured as a trunk port.