CompTIA CS0-003 - CompTIA CyberSecurity Analyst CySA+ Certification Exam

A credentialed scan is a type of vulnerability scan that uses valid credentials to log in to the scanned systems and perform a more thorough and accurate assessment of their vulnerabilities. A credentialed scan can access more information than a non-credentialed scan, such as registry keys, patch levels, configuration settings, and installed applications. A credentialed scan can also reduce the number of false positives and false negatives, as it can verify the actual state of the system rather than relying on inference or assumptions. The other types of scans are not related to the issue of incomplete findings, as they refer to different aspects of vulnerability scanning, such as the scope, location, or frequency of the scan. An external scan is a scan that is performed from outside the network perimeter, usually from the internet. An external scan can reveal how an attacker would see the network and what vulnerabilities are exposed to the public. An external scan cannot access internal systems or resources that are behind firewalls or other security controls. A differential scan is a scan that compares the results of two scans and highlights the differences between them. A differential scan can help identify changes in the network environment, such as new vulnerabilities, patched vulnerabilities, or new devices. A differential scan does not provide a complete list of findings by itself, but rather a summary of changes. A network scan is a scan that focuses on the network layer of the OSI model and detects vulnerabilities related to network devices, protocols, services, and configurations. A network scan candiscover open ports, misconfigured firewalls, unencrypted traffic, and other network-related issues. A network scan does not provide information about the application layer or the host layer of the OSI model, such as web applications or operating systems.

The output shows the results of a port scan, which is a technique used to identify open ports and services running on a network host. Port scanning can be used by attackers to discover potential vulnerabilities and exploit them, or by defenders to assess the security posture and configuration of their network devices1

The output lists six ports that are open on the target host, along with the service name and version associated with each port. The service name indicates the type of application or protocol that is using the port, while the version indicates the specific release or update of the service. The service name and version can provide useful information for both attackers and defenders, as they can reveal the capabilities, features, and weaknesses of the service.

Among the six ports listed, two are particularly risky and should be investigated further by the security team: port 23 and port 636.

Port 23 is used by Telnet, which is an old and insecure protocol for remote login and command execution. Telnet does not encrypt any data transmitted over the network, including usernames and passwords, which makes it vulnerable to eavesdropping, interception, and modification by attackers. Telnet also has many known vulnerabilities that can allow attackers to gain unauthorized access, execute arbitrary commands, or cause denial-of-service attacks on the target host23

Port 636 is used by LDAP over SSL/TLS (LDAPS), which is a protocol for accessing and modifying directory services over a secure connection. LDAPS encrypts the data exchanged between the client and the server using SSL/TLS certificates, which provide authentication, confidentiality, and integrity. However, LDAPS can also be vulnerable to attacks if the certificates are not properly configured, verified, or updated. For example, attackers can use self-signed or expired certificates to perform man-in-the-middle attacks, spoofing attacks, or certificate revocation attacks on LDAPS connections.

Therefore, the security team should investigate further why port 23 and port 636 are open on the target host, and what services are running on them. The security team should also consider disabling or replacing these services with more secure alternatives, such as SSH for port 23 and StartTLS for port 6362

Reimaging the device is the most effective way to eliminate persistent malware because some sophisticated malware, such as rootkits and firmware-level threats, can survive traditional scans and removals.

If a system keeps getting reinfected after cleaning, it may indicate a deeply embedded persistent threat, possibly in:

The Master Boot Record (MBR) or EFI firmware.

A compromised system restore point.

A hidden backdoor left by the malware.

Why Not Other Options?

A (Update and scan in safe mode) → Might help, but if malware is persistent, it will likely return.

C (Upgrade OS) → Does not necessarily remove malware; some malware survives OS upgrades.

D (Secondary scanner) → Useful for detection but does not guarantee complete removal.

Best Practice:

Replace the hard drive to eliminate firmware-level infections.

Reimage the system from a known-good source.

Update the OS and security patches before reconnecting to the network.

A Memorandum of Understanding (MOU) is a formal agreement that outlines the roles and responsibilities of each party involved in a particular process or project, especially within security frameworks. In the context of cybersecurity, an MOU is commonly used to clarify and document the security responsibilities of different departments or entities involved. It helps ensure everyone understands their specific duties and contributions to security, which is crucial for coordination and risk management. According to CompTIA Security+ guidelines, while options A, C, and D describe other forms of agreements, they do not capture the essential purpose of an MOU as accurately as option B does.

The correct answer is C. False negative.

A false negative is a situation where an attack or a threat is not detected by a security control, even though it should have been. In this case, the SIEM rule was unable to detect an attack with nine failed logins, which is below the threshold of ten failed logins that triggers an alert. This means that the SIEM rule missed a potential attack and failed to alert the security analysts, resulting in a false negative.

A false positive is a situation where a benign or normal activity is detected as an attack or a threat by a security control, even though it is not. A true negative is a situation where a benign or normal activity is not detected as an attack or a threat by a security control, as expected. A true positive is a situation where an attack or a threat is detected by a security control, as expected. These are not the correct answers for this question.

Outdated librariesin a legacy web applicationintroduce security vulnerabilities, as theylack modern patchesandcontain known exploits​.

Option A (Misconfigured WAF)can contribute to security issues but is notinherent to legacy applications.

Option B (Data integrity failure)is apotential impactbut not a direct cause of recurring incidents.

Option D (Insufficient logging)affects detection, but theroot causeisinsecure, outdated components.

Thus,C (Outdated libraries) is the correct answer, aslegacy applications frequently suffer from unpatched vulnerabilities​.

An incident manager should work with the legal and public relations entities to ensure correct processes are adhered to when communicating incident reporting to the general public, as a best practice. The legal entity can provide guidance on the legal implications and obligations of disclosing the incident, such as compliance with data protection laws, contractual obligations, and liability issues. The public relations entity can help craft the appropriate message and tone for the public communication, as well as manage the reputation and image of the organization in the aftermath of the incident. These two entities can help the incident manager balance the need for transparency and accountability with the need for confidentiality and security12. References: Incident Communication Templates, Incident Management: Processes, Best Practices & Tools - Atlassian

Dictionary attacks involve an attacker attempting to guess passwords by using a list of common passwords. Implementing a lockout policy is effective because it limits the number of login attempts, thereby hindering the attacker's ability to repeatedly attempt different passwords. Lockout policies are standard in cybersecurity practices to prevent brute-force and dictionary attacks by temporarilydisabling an account after a certain number of failed login attempts. According to CompTIA Security+ standards, password complexity (option B) and multifactor authentication (option A) are helpful but are not as immediately effective in directly preventing repeated attempts as a lockout policy.

Comprehensive and Detailed Step-by-Step Explanation:Automation in cybersecurity is best utilized to improve the speed and accuracy of incident detection, analysis, and response. Tools like SOAR (Security Orchestration, Automation, and Response) streamline workflows, allowing analysts to focus on more complex tasks while reducing response times. This ensures quicker containment and mitigation of threats.

Wiresharkis apacket capture and analysis toolthat allows analysts to inspect network traffic and detectcleartext credentialssent over protocols like HTTP, FTP, and Telnet​.

Option A (OpenVAS)is avulnerability scanner, not a network analysis tool.

Option B (Angry IP Scanner)identifiesactive hosts, but does not analyze packet contents.

Option D (Maltego)is used forOSINT and network reconnaissance, not packet inspection.

Thus,C (Wireshark) is the correct answer, as itcaptures and analyzes network packets to identify unencrypted passwords​.