CWNP CWAP-404 - Certified Wireless Analysis Professional

The HT protection mode in which an AP is operating can be identified by looking at the HT Operations element in a Beacon frame. The HT Operations element is a part of the Beacon frame that contains information about the High Throughput (HT) capabilities and operation of an 802.11n BSS. The HT Operations element has a field called HT Protection, which indicates how the BSS protects its HT transmissions from interference or collisions with non-HT devices or BSSs. The HT Protection field can have four values: No Protection, Nonmember Protection, 20 MHz Protection, or Non-HT Mixed Mode. The other options are not correct, as they do not contain information about the HT protection mode. The HT Protection element does not exist, the ERP Information element is used for Extended Rate PHY (ERP) protection mode for 802.11g devices, and the HT Capabilities element is used for indicating the supported HT features of an individual device. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 125-126

The function of the PHY layer is to convert PSDUs to PPDUs for transmissions and PPDUs to PSDUs for receptions. A PSDU (PHY Service Data Unit) is the data unit that is passed from the MAC layer to the PHY layer for transmission, or from the PHY layer to the MAC layer for reception. A PPDU (PHY Protocol Data Unit) is the data unit that is transmitted or received over the wireless medium by the PHY layer. A PPDU consists of a PSDU and a PHY header, which contains information such as modulation, coding, and data rate. The PHY layer adds or removes the PHY header to or from the PSDU during the conversion process. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 97-98

A capture visualization tool is a software application that can open a packet capture file and display various graphs, charts, tables, and statistics that illustrate the characteristics and behavior of the wireless network. A capture visualization tool can help a network administrator with little knowledge of 802.11 protocols to evaluate the overall health and performance of their wireless network by providing a visual and intuitive representation of the captured data. A spectrum analyzer is a hardware device that measures the radio frequency signals in a given frequency range and displays their amplitude, frequency, and modulation. A spectrum analyzer can help identify sources of interference and noise in the wireless environment, but it cannot open a packet capture file. Python is a programming language that can be used to write scripts or applications that manipulate or analyze packet capture files, but it requires coding skills and knowledge of 802.11 protocols. A WLAN scanner is a software application that scans for available wireless networks and displays information such as SSID, BSSID, channel, signal strength, security type, and vendor. A WLAN scanner can help discover wireless networks and their basic parameters, but it cannot open a packet capture file345 References:

CWAP-404 Study Guide, Chapter 2: Protocol Analysis, page 63

CWAP-404 Objectives, Section 2.5: Use capture visualization tools

CWAP-404 Study Guide, Chapter 4: Spectrum Analysis and Troubleshooting, page 117

CWAP-404 Objectives, Section 4.1: Use spectrum analysis tools

CWAP-404 Study Guide, Chapter 2: Protocol Analysis, page 33

CWAP-404 Objectives, Section 2.2: Analyze field values

The function of the PHY preamble is to allow the receiver to detect and synchronize with the signal. The PHY preamble is a part of the PPDU that is transmitted before the PHY header and the PSDU. The PHY preamble consists of a series of training fields that help the receiver to adjust its parameters, such as frequency, timing, and gain, to match the incoming signal. The PHY preamble also helps the receiver to estimate the channel conditions and noise level. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 4: 802.11 Physical Layer, page 99-100

A Reassociation Request frame is sent every time a STA roams from one AP to another within the same ESS. A Reassociation Request frame is similar to an Association Request frame, but it also contains the BSSID of the current AP that the STA is leaving. This allows the new AP to coordinate with the old AP and transfer the STA’s context information, such as security keys, QoS parameters, and buffered frames. This way, the STA can maintain its connectivity and session continuity during roaming . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 195;CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 196.

When a data frame is encrypted with WPA2, the encryption is applied to the frame body including the LLCPDU. The LLCPDU (Logical Link Control Protocol Data Unit) is a part of the frame body that contains information such as protocol type, source and destination service access points (SAPs), and control fields. The LLCPDU is added by the LLC (Logical Link Control) sublayer to provide multiplexing and flow control functions for different upper layer protocols. When a data frame is encrypted with WPA2, which uses AES-CCMP as its encryption algorithm, both the payload and the LLCPDU are encrypted as a single unit. The MAC header and FCS are not encrypted, as they are needed for addressing and error detection purposes. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 115-116

Open Authentication without encryption is not allowed when operating a BSS in the 6 GHz band, according to the 802.11 standard. Open Authentication is a type of authentication method that does not require any credentials or security information from a STA (station) to join a BSS (Basic Service Set). Open Authentication can be used with or without encryption, depending on the configuration of the BSS and the STA. Encryption is a technique that scrambles the data frames using an algorithm and a key to prevent unauthorized access or eavesdropping. However, in the 6 GHz band, which is a newly available frequency band for WLANs, OpenAuthentication without encryption is prohibited by the 802.11 standard, as it poses security and interference risks for other users and services in the band. The 6 GHz band requires all WLANs to use WPA3-Personal or WPA3-Enterprise encryption methods, which are more secure and robust than previous encryption methods such as WPA2 or WEP. The other options are not correct, as they do not describe scenarios where Open Authentication without encryption is not allowed by the 802.11 standard. When operating a BSS in the CBRS band, which is another newly available frequency band for WLANs, Open Authentication without encryption is allowed, but not recommended, as it also poses security and interference risks for other users and services in the band. When operating a BSS in FIPS mode, which is a mode that complies with the Federal Information Processing Standards for cryptographic security, Open Authentication without encryption is allowed, but not compliant, as it does not meet the FIPS requirements for encryption algorithms and keys. When operating a BSS in a government facility, Open Authentication without encryption is allowed, but not advisable, as it may violate the government policies or regulations for wireless security. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 8: Security Analysis, page 220-221

The difference between a Data frame and a QoS-Data frame is that QoS Data frames include a QoS control field. A Data frame is a type of data frame that is used to carry user data or upper layer protocol data between STAs and APs. A QoS Data frame is a type of data frame that is used to carry user data or upper layer protocol data between STAs and APs that support QoS (Quality of Service) features. QoS features allow different types of traffic to be prioritized and handled differently according to their QoS requirements, such as delay, jitter, throughput, etc. QoS Data frames include a QoS control field in their MAC header, which contains information such as traffic identifier (TID), queue size (TXOP), acknowledgment policy (ACK), etc., that are used for QoS purposes. The other options are not correct, as they do not describe the difference between Data and QoS Data frames. QoS Data frames do not include a DSCP (Differentiated Services Code Point) control field, which is part of the IP header in the network layer, not the MAC header in the data link layer. QoS Data frames do not include a QoS information element (IE), which is part of some management frames that indicate QoS capabilities or parameters, not data frames. QoS Data frames do not include an 802.1Q VLAN tag, which is part of some Ethernet frames that indicate VLAN membership or priority, not wireless frames. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 5: 802.11 MAC Sublayer, page 118-119

Receive sensitivity is the minimum signal level that a receiver can detect and decode. Different devices may have different receive sensitivity levels depending on their hardware specifications and antenna configurations. In this scenario, the portable analyzer has a lower receive sensitivity than the AP, meaning that it requires a stronger signal to capture the packets from the client STA. The AP, on the other hand, has a higher receive sensitivity and can receive the packets from the client STA even if they have a weaker signal. This explains why the portable analyzer can only see unidirectional traffic from the AP to the client when capturing near the AP5 References:

CWAP-403 Study Guide, Chapter 4: PHY Layer Analysis, page 121

CWAP-403 Objectives, Section 4.3: Analyze PHY layer metrics