CWNP CWDP-305 - Certified Wireless Design Professional
When installing a cloud-based AP, what is the most common process used?
You are on site, planning a network at a freight shipping company on a busy harbor. Since the preliminary WLAN design specifies support for the 5 GHz spectrum, you would like to test for radar pulses to determine if DFS channels should be supported at this facility. As a part of your spectral survey with a laptop-based analyzer, you include DFS testing to identify the presence of radar. This is done by manually observing Real-time FFT, Duty Cycle, and Active Devices charts of the spectrum analyzer software.
What potential drawback is present with this DFS test method?
What should always be done before connecting an AP to the production network?
Which one of the following is an essential metric to measure when performing a survey and design for VoIP across WLANs?
One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the following information:
The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse switches mounted on the walls.
The warehouse storage is composed of metallic racks with varying inventory levels and contents, from electronics and plastic toys to food pallets and juice bottles.
Workers need basic data coverage from their working location and are not highly mobile. They usually work from one single aisle, and their laptop is on a cart with wheels.
What would be your one recommendation to provide coverage to the central area of the warehouse?
In a large enterprise (5000+ wireless users), what would NOT be a recommended method by which IP addresses and VLANs are assigned to different clients associated to the same AP?
As you plan a WLAN upgrade, you have assessed the network requirements and data signatures of your applications. One of the popular applications used on your network requires high bandwidth and low to medium Wi-Fi loss, but can tolerate moderate latency and jitter. What application matches this description?
What kind of antenna results in a nearly circular pattern on the azimuth chart but a very flat donut shape on the elevation chart?
What should you do during the design process of a point-to-point bridge link to minimize CCI and ACI?
Main Topic:Post-Design ValidationandTroubleshooting
Question:
When viewing channel utilization information from a protocol analyzer, if high channel utilization is occurring, what should you ensure does not exist?
