Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

EMC DES-4421 - Specialist - Implementation Engineer, PowerEdge MX Modular Exam

EMC DES-4421 Premium Access     Download Demo    
Page: 1 / 2
Total 54 questions

Which command(s) is supported in the current PowerEdge MX Redfish implementation?

A.

PUT and DELETE

B.

PUT only

C.

HEAD and PUT

D.

GET and DELETE

An administrator is connecting two MX840c to an MX5016s. The MX5016s is configured in Enclosure Assigned mode.

What should the requirements of this mode be to avoid configuration issues?

A.

MX745P with a cluster aware OS

B.

MX745P with no OS restrictions

C.

HBA330MMZ with no OS restrictions

D.

HBA330MMZ with a cluster aware OS

What is the number of server-facing ports and the bandwidth of each port on the MXG610s? (Choose two.)

A.

8x 16 Gbps

B.

16x 32 Gbps

C.

16x 16 Gbps

D.

8x 32 Gbps

Which controller option the mapping of an entire MX5016s to multiple compute sleds?

A.

PERC H730 only

B.

HBA330 only

C.

H745 Jumbo PERC

D.

HBA330 and PERC H730

A server sled has a single mezzanine card installed in the correctly supported slot.

To which IOM fabric(s) does the sled have access?

A.

Fabric A1 and Fabric A2

B.

Fabric A1 only

C.

Either Fabric A or Fabric B, depending on the configuration set in OME-M

D.

Fabric A1 and Fabric B1

Which I/O module(s) supports Full Switch and SmartFabric operating modes?

A.

MX9116n and MX5108n

B.

MX5108 and MX5016s

C.

MX9116n only

D.

MX9116 and MX7116n

What is a characteristic of MX7000 networking in Full Switch Mode?

A.

Layer 2 bridging is disabled by default and interfaces must join a bridge domain (VLAN) before being able to forward frames.

B.

Networking is enabled by default and all switch-specific OS10EE capabilities are available.

C.

Networking is available on MX9116n FSE and MX7116n FEM but not on the MX5108n.

D.

Switches operate as layer 2 I/O aggregation devices and are managed through OME-M.

An MX7000 administrator has been tasked to create a Scalable Fabric Architecture on a 3 chassis setup using Fabric B.

Which IOM configuration is recommended?

A.

Chassis 1 - Slot B1: MX9116n; Slot B2: MX9116nChassis 2 - Slot B1: MX5108n; Slot B2: MX5108nChassis 3 - Slot B1: MX5108n; Slot B2: MX5108n

B.

Chassis 1 - Slot B1: MX7116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX7116nChassis 3 - Slot B1: MX9116n; Slot B2: MX9116n

C.

Chassis 1 - Slot B1: MX9116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX9116nChassis 3 - Slot B1: MX7116n; Slot B2: MX7116n

D.

Chassis 1 - Slot B1: MX9116n; Slot B2: MX5108nChassis 2 - Slot B1: MX5108n; Slot B2: MX9116nChassis 3 - Slot B1: MX5108n; Slot B2: MX5108n

A technician replaces a failed Management Module in an MX7000 chassis group. After the technician leaves the site, the administrator reports that the lead chassis is no longer able to communicate with its members.

How can OME-M be used to confirm the cabling configuration?

A.

View the health status of the lead Chassis Management Module

B.

View the health status of the lead Chassis Management ports

C.

View the I/O module topology map from the lead chassis

D.

View the topology map from the Group Lead

Which protocol(s) does Redfish use?

A.

JSON and OData only

B.

JSON only

C.

JSON, OData, and SNMP

D.

OData only