Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

EMC E20-375 - RecoverPoint Specialist Exam for Implementation Engineers

EMC E20-375 Premium Access     Download Demo    
Page: 1 / 6
Total 200 questions

A RecoverPoint/SE cluster is using vRPAs. A second cluster needs to be connected. Which RPA type must be used at the new cluster?

A.

Virtual or Physical

B.

Virtual only

C.

Generation 5

D.

Physical only

After running a log collection, which user should you log in as to download the output file?

A.

admin

B.

monitor

C.

boxmgmt

D.

security-admin

A company is currently using RecoverPoint/SE in their environment. They have purchased a VMAX which will be deployed to replace a VNX splitter at one site only.

What must be done before they can use the VMAX with RecoverPoint (RP)?

A.

Obtain an updated license that will support RP/EX or RP/CL

B.

Use Unisphere for RecoverPoint to convert from RP/SE to RP/EX or RP/CL

C.

Purchase and use a VMAX at the other site

D.

Deploy an updated splitter on the existing array that will function with the new VMAX splitter

What is the maximum number of clusters supported in an EMC RecoverPoint/CL environment?

A.

2

B.

3

C.

4

D.

5

You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP addresses are set. However, Deployment Manager cannot discover RPAs.

What is a possible cause?

A.

Port 22 not open between host running Deployment Manager and RPAs

B.

Deployment Manager host and RPAs on different subnets

C.

DHCP not used to set IP addresses for RPAs

D.

RPAs not installed separately using Deployment Manager

Which IP diagnostic command is used to test the IP connectivity performance between RPAs when the 'Test Throughput' option is chosen in the RPA interface?

A.

iperf

B.

top

C.

ethtool

D.

netstat

A Consistency Group is experiencing High Load twice a day in a RecoverPoint remote replication environment.

What is a possible reason for the High Load to occur on the Consistency Group?

A.

Slow-performing journal volume at the remote copy cluster

B.

Large amount of reads coming from the local source volumes

C.

Slow-performing repository at the local cluster

D.

Slow-performing repository at the remote cluster

When RecoverPoint is deployed with a VMAX splitter, what presents the virtual target and virtual remote devices?

A.

RPAs

B.

VMAX

C.

Switch

D.

Gatekeepers

You are adding a VMAX array to a RecoverPoint/CL environment.

What needs to be done?

A.

Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.

B.

Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.

C.

After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to – including the production and copy volumes.

D.

Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

Which tool is used to enable a VNX splitter?

A.

Unisphere Service Manager

B.

Unisphere for RecoverPoint

C.

Deployment Manager

D.

NaviSecCLI