RedHat EX200 - Red Hat Certified System Administrator - RHCSA (8.2)
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt
When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11
Password: password
Create a volume group, and set the size is 500M, the size of single PE is 16M. Create logical volume named lv0 in this volume group, set size is 20 PE, make it as ext3 file system, and mounted automatically under data.
Part 2 (on Node2 Server)
Task 4 [Managing Logical Volumes]
Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz
(Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)
Install the appropriate kernel update from http://server.domain11.example.com/pub/updates.
The following criteria must also be met:
The updated kernel is the default kernel when the system is rebooted
The original kernel remains available and bootable on the system
Create a collaborative directory/home/admins with the following characteristics:
Group ownership of /home/admins is adminuser
The directory should be readable, writable, and accessible to members of adminuser, but not to any other user. (It is understood that root has access to all files and directories on the system.)
Files created in /home/admins automatically have group ownership set to the adminuser group
Configure your Host Name, IP Address, Gateway and DNS.
Host name: dtop5.dn.ws.com
IP Address: 172.28.10.5/4
Gateway: 172.28.10.1
DNS: 172.28.10.1
Search a String
Find out all the columns that contains the string seismic within /usr/share/dict/words, then copy all these columns to /root/lines.tx in original order, there is no blank line, all columns must be the accurate copy of the original columns.
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
