Huawei H12-811_V1.0 - HCIA-Datacom V1.0 Exam

Detailed Explanation:In Huawei VRP, the command-privilege command is used to modify the privilege level of a specific command. In this case, the command adjusts the privilege level of the save command within the user view to level 3, which is higher than the default level. This command does not modify the user ' s privilege level itself but changes the required privilege level to use the save command in the user view .

Comprehensive and Detailed Explanation:

A static route requires the following essential parameters:

Destination Network → The network to reach (e.g., 10.1.1.0/24). ✅

Next-hop IP Address → The next router to forward traffic (e.g., 192.168.1.1). ✅

Outbound Interface → Instead of a next-hop, an interface (e.g., GigabitEthernet0/0/1) can be used. ✅

❌ Incorrect Option:

MAC address is not needed because routers forward packets based on IP, not MAC addresses.

✅ Reference: HCIA-Datacom Routing Guide – Static Routing Fundamentals

Switch (A): A network switch is a fundamental device used to connect devices in a local area network (LAN) and forward packets based on MAC addresses.

Firewall (B): A firewall is used to filter and protect the network from unauthorized access and threats.

Router (D): A router is essential for forwarding packets between different networks and managing routing.

Agile Controller (C): This is a network automation and management tool rather than a fundamental networking device. Since it is not typically deployed as a core network device, option C is the correct answer.