Huawei H13-624_V5.5 - HCIP-Storage V5.5

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* confirms: “The CLI command ‘show license_active’ is used to query details of activated licenses on Huawei flash storage systems, including license status and features enabled.” This makes the statement true, as the command is a standard tool for license management.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses host-side performance issues: “Outdated HBA drivers or insufficient concurrent HBAs can cause high host latency. Upgrading the HBA driver to the latest version ensures compatibility and performance. Adjusting the multipathing software’s load balancing algorithm to min-task optimizes I/O distribution across paths, reducing latency.” Let’s evaluate:

- Option A: Incorrect. HBA vendor software may query settings, but modifying concurrent HBAs is typically a firmware or driver-level task, not a standard management software function.

- Option B: Correct. Upgrading the HBA driver resolves compatibility and performance issues.

- Option C: Correct. The min-task algorithm balances I/O to minimize queuing delays.

- Option D: Incorrect. Cache prefetch policies affect storage-side performance, not host-side latency caused by HBA issues.

Thus, options B and C are the correct measures.

The HyperCDP (Continuous Data Protection) feature in Huawei all-flash storage, like OceanStor Dorado, provides high-frequency snapshots. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* states:

- Option A: True. “HyperCDP snapshots can be used for data analysis, application testing, and backup, as they provide consistent point-in-time copies.”

- Option B: True. “After a HyperCDP snapshot is created, write requests to the source LUN use copy-on-write (COW) technology, storing new data in a new storage pool location and updating the source LUN’s pointer.”

- Option C: False. The material clarifies: “HyperCDP snapshots can be directly mapped to hosts as read-only LUNs, without requiring file system sharing, for accessing point-in-time data.”

- Option D: False. “HyperCDP is optimized for high-density snapshots with low memory overhead, using metadata structures rather than full file system objects.”

Thus, options A and B are true.

The Huawei Ocean Protect Appliance leverages CPU core grouping and intelligent scheduling to optimize performance, as described in the *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)*. The material states: “CPU core grouping and intelligent scheduling in Ocean Protect appliances enable physical and logical isolation of resources, ensuring that specific cores are dedicated to specific tasks. This isolation reduces contention and minimizes latency for critical operations.” This directly supports option C, as the technology’s primary advantage is reducing latency through resource isolation.

- Option A: Incorrect. While load balancing is a feature of some Huawei storage systems, the training material does not specify that CPU core grouping and intelligent scheduling in Ocean Protect appliances focus on distributing jobs for load balancing. Instead, it emphasizes resource isolation.

- Option B: Incorrect. The material indicates that this technology prevents core overload by isolating tasks, avoiding high latency, making this statement false.

- Option D: Incorrect. Prefetching data and metadata to improve cache hit ratios is unrelated to CPU core grouping and scheduling, which focus on processor resource management, not cache operations.

Thus, option C is the correct advantage of this technology.

Configuring iSCSI block services on Huawei scale-out storage, like OceanStor Pacific, involves specific steps. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To enable iSCSI block services, the engineer must create a block storage pool to allocate storage resources and configure the iSCSI service to set up initiator-target relationships and network parameters.” Let’s evaluate:

- Option A: Required. A block storage pool is necessary to provide the capacity for iSCSI LUNs.

- Option B: Required. Configuring the iSCSI service is essential to enable the protocol and connectivity.

- Option C: Not required. DPC is used for file services, not iSCSI block services.

- Option D: Not required. DPC installation is unrelated to iSCSI configuration.

Thus, options A and B are mandatory.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses hardware maintenance: “Before removing a faulty interface module, engineers must perform pre-operations, such as disabling the module via DeviceManager or CLI, ensuring no active I/O, and verifying redundancy to avoid service disruption. Direct removal withoutthese steps can cause data loss or system errors.” The statement that the module can be removed without pre-operations is false, as these steps are mandatory.

This question addresses issues with enabling object services in Huawei OceanStor Pacific 9550 systems, as covered in the *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)*. The material outlines prerequisites for enabling object services, including time synchronization. Let’s evaluate:

- Option A: Possible cause. The material states: “Manual time adjustments on cluster nodes can cause inconsistencies in conflict handling, preventing object services from being enabled.”

- Option B: Possible cause. The material notes: “Lack of NTP synchronization or use of different NTP sources can lead to time discrepancies, causing object service failures.”

- Option C: Not a cause. The material clarifies: “Namespaces with the same name under the same account are allowed in OceanStor Pacific, as they are managed uniquely per tenant or bucket.” This does not prevent object service enablement.

- Option D: Possible cause. The material confirms: “Inconsistent NTP clocks between the storage cluster and client can disrupt object service operations, as time synchronization is critical for protocols like S3.”

Thus, option C is not a possible cause.

The HyperClone feature in Huawei OceanStor Dorado systems creates full data copies for reliability and testing. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* states: “HyperClone creates a full copy of a source LUN to a target LUN. A source LUN can form multiple HyperClone pairs with different target LUNs. Data copying starts at synchronization, but hosts must wait for the copy to complete before accessing the target LUN. HyperClone supports bidirectional synchronization, allowing data restoration from target to source. For block storage, it uses redirect-on-write (ROW), while file system clones use copy-on-write (COW).” Let’s evaluate:

- Option A: False. The material confirms that a source LUN can form multiple HyperClone pairs with different target LUNs.

- Option B: False. Hosts cannot access the target LUN until the copy process completes, contrary to the statement.

- Option C: True. Bidirectional synchronization is supported, including restoration from target to source.

- Option D: True. The material distinguishes ROW for block clones and COW for file system clones.

Thus, options A and B are false.