Huawei H19-338 - HCSP-Presales-Storage

NE8000 M14 cannot be deployed in a 300 mm-deep cabinet. According to the Huawei NetEngine 8000 M14 Routers Support Guide1, the NE8000 M14 requires a cabinet with a depth of at least 800 mm.

Free mobility cannot be deployed for traffic between VNs. Free mobility is supported only for policies in a VN. Communication between VNs can be directly implemented on the border node or through the external firewall. Free mobility is a feature that allows users to access network resources without changing their IP addresses or VLANs when they move within a VN. Communication between VNs requires inter-VN routing or firewall policies to ensure security and isolation.

SDR (Software Defined Radio) is a technology that can be used to switch the number of RFs (Radio Frequencies) dynamically. According to the Huawei AirEngine Wi-Fi 6 Solution White Paper, SDR enables an AP to dynamically switch between 2.4 GHz and 5 GHz bands based on the number of users and service requirements, improving spectrum utilization and user experience.

CloudEngine S5732-H series multi-GE switches do not deliver a switching performance of 1760 Gbit/s. According to the CloudEngine S5732-H Series Multi-GE Switches Datasheet, CloudEngine S5732-H series multi-GE switches deliver a switching performance of up to 336 Gbit/s.

The NE8000M1C supports dual AC/DC power modules. According to the NetEngine 8000 M1C Service Router Datasheet, NE8000M1C supports two power modules that can work in 1+1 redundancy mode. The power modules can be AC or DC power modules.

 NE8000 X4 and X8 are high-end core routers designed for large-scale IP backbone networks, data centers, and metro networks . They support various redundancy designs to ensure high availability and reliability, such as MPU (Main Processing Unit) 1+1 backup, SFU (Switch Fabric Unit) 7+1 backup, and PEM (Power Entry Module) 1+1 backup . MPU 1+1 backup means that two MPUs work in active/standbymode and provide control plane redundancy . SFU 7+1 backup means that eight SFUs work in N+1 mode and provide data plane redundancy . PEM 1+1 backup means that two PEMs work in active/standby mode and provide power supply redundancy . The NE8000 X4 and X8 do not support power supply 9+1 backup, which is a feature of the NE8000 X16 router .

iMaster NCE-FabricInsight is Huawei’s intelligent O&M software that can provide network-wide visibility, intelligent analysis, and automated O&M for data center networks. iMaster NCE-FabricInsight can collect data from various sources, such as SNMP, Telemetry, Syslog, sFlow, and iFIT. It can also use AI algorithms to detect anomalies, locate faults, predict risks, and optimize performance. iMaster NCE-FabricInsight can also automate network configuration, deployment, verification, and recovery.

AirEngine 6760R-51E is a Wi-Fi 6 AP designed for rail transit scenarios. It supports 8x8 MU-MIMO and eight spatial streams, achieving a rate of up to 5.95 Gbit/s2. AirEngine 6761-21T is a Wi-Fi 6 AP designed for indoor scenarios such as offices and classrooms. AirEngine 6760-X1E is a Wi-Fi 6 AP designed for indoor scenarios such as hotels and shopping malls. AirEngine 6760-51EI is a Wi-Fi 6 AP designed for indoor scenarios such as stadiums and exhibition halls.