Huawei H35-480_V3.0 - HCIA-5G-RAN V3.0 Exam

NAS (Non-Access Stratum) procedure management in 5G involves three specific actions: registration management, session management, and RRC connection setup. Registration management involves sending and receiving of NAS messages related to the establishment of user-network connections, such as attach and detach procedures. Session management involves sending and receiving of NAS messages related to the management of user session related information, such as security context management. RRC connection setup involves sending and receiving of NAS messages related to the establishment, modification, and release of RRC connections. RRC reestablishment is not involved in NAS procedure management in 5G.

TS 138 331 - V15.2.1 - 5G; NR; Radio Resource Control (RRC ...

https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.02.01_60/ts_138331v150201p.pdf

5g nr fr1 non-standalone ue rf conformance testing

https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1sl/1SL368_0e_5G_NR_UE_RF_conformance_38.521-3.pdf

TS 138 331 - V15.3.0 - 5G; NR; Radio Resource Control (RRC ...

https://www.etsi.org/deliver/etsi_ts/138300_138399/138331/15.03.00_60/ts_138331v150300p.pdf

H110V6 refers to a scenario where there are 110 horizontal and 6 vertical antenna elements installed on the gNodeB, which is ideal for providing coverage in high-rise office buildings. The high number of horizontal antenna elements allows for high-density deployment, which can improve the coverage and capacity of the network in these types of environments.

https://www.5gworldpro.com/blog/2020/11/11/what-is-difference-between-pci-in-4g-lte-and-pci-in-5g-nr/

The maximum number of PCIs (Physical Cell Identifiers) supported by a 5G network is 1008. This is specified in 3GPP 5G standard TS 38.211, which states that the maximum number of PCIs that a 5G network can support is 1008.

In 5G, each cell is assigned a unique identifier called the PCI (Physical Cell Identity). The PCI is used to identify the cell and its system information, and it is used for various purposes such as cell selection, handover, and interference management.

According to 3GPP specifications, the maximum number of PCIs that can be supported by a 5G network is 1008, which allows for a large number of cells to be deployed in a network. However, the actual number of PCIs used in a network will depend on the specific deployment scenario, the network architecture, and the capacity requirements of the network.

The Common Public Radio Interface (CPRI) is a standard that defines the interface between the BBU (baseband unit) and the RRU (remote radio unit) in a wireless base station. The BBU and the RRU are connected by an optical fiber cable, known as the CPRI optical fiber.

The CPRI optical fiber is used to transport the digital baseband signals between the BBU and the RRU. The distance between the BBU and the RRU can be up to several kilometers, but the standard CPRI specification only supports a maximum distance of 150m between the BBU and RRU using single-mode fiber. If the distance exceeds 150m, multimode fiber should be used to extend the distance between the BBU and the RRU.

Control subsystem: It is responsible for managing and controlling the overall operation of the BBU, it provides functions such as system initialization, software management, and alarm management.

Transmission subsystem: It is responsible for the transmission of data between the baseband subsystem and the RF subsystem, it includes functions such as data encoding, modulation, and multiplexing.

Baseband subsystem: It performs the baseband processing for the BBU, it includes functions such as demodulation, decoding, and demultiplexing.

CQI (channel quality indicator) is a value that represents the channel quality of the wireless link between a UE (user equipment) and an eNodeB (base station) in an NR (New Radio) network. The UE reports the CQI value to the eNodeB, which uses it to determine the optimal coding scheme and modulation for the downlink transmissions to that UE.

A larger CQI value indicates better channel quality, higher link quality and a better signal-to-noise ratio. When the channel quality is good, the UE can report a larger CQI value, and the eNodeB can use a higher modulation and coding scheme to achieve higher data rate and better performance. On the other hand, when the channel quality is poor, the UE will report a smaller CQI value, and the eNodeB will use a lower modulation and coding scheme to reduce the error rate. It's worth noting that, the exact range of CQI values and the specific mapping between CQI values and modulation/coding schemes may vary depending on the specific network deployment, it's always recommended to refer to the official guide or document of the product for detailed and accurate information.

An NR CQI value represents a coding scheme and coding efficiency, and they are reported in the form of 8 bits by a UE. According to the official Huawei documentation, "The 8-bit long CQI value maps to a coding scheme and coding efficiency that can be used for Transport Block (TB) size selection."

CQI (channel quality indicator) is a value that represents the channel quality of the wireless link between a UE (user equipment) and an eNodeB (base station) in an NR (New Radio) network. The UE reports the CQI value to the eNodeB, which uses it to determine the optimal coding scheme and modulation for the downlink transmissions to that UE.

The CQI value is reported by UE to the eNodeB, it's a value that indicates the channel quality of the link between the UE and the eNodeB. The CQI value is encoded in 8 bits, which allows for a total of 256 different CQI values.

According to the official Huawei documentation, the possible causes for a 4G cell not delivering B1 measurement configurations during a 5G service test are that the UE does not support EN-DC, the NSA switch is not turned on, or neighboring LTE cells and SCGs are not configured.

A. RSRP (Reference Signal Received Power) is the power level of the reference signals received from the cell, it is used to measure the strength of the signal from the cell, and it is an important parameter for cell selection and handover decisions. C. PCI (Physical Cell Identity) is a unique identifier assigned to each cell in the network, it is used to identify the cell and its system information.