Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

HP HPE0-V14 - Building HPE Hybrid IT Solutions (Rev. 19.41)

HP HPE0-V14 Premium Access     Download Demo    
Page: 7 / 9
Total 303 questions

You are troubleshooting a customer’s HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.

What should you do?

A.

Set the USB 3.0 mode to Enabled.

B.

Set the USB 3.0 mode to Auto.

C.

Use the internal USB 3.0 connector.

D.

Use the front-facing USB 3.0 connector.

You are installing additional components to a server.

Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

A.

iQuote Universal

B.

Smart Selling tool

C.

Product Bulletin

D.

SPOCK

A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?

A.

Arista

B.

Altoline

C.

Aruba

D.

FlexFabric

A customer needs to increase the availability and bandwidth of network connectivity to their servers.

Which switch feature meets the customer’s needs?

A.

Remote direct memory access over Converged Ethernet (RoCE)

B.

Virtual Local Area Network (VLAN)

C.

Jumbo frames

D.

Link Aggregation and Control Protocol (LACP)

A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication

What should the customer install at the branch office?

A.

StoreOnce 3100

B.

StoreOnce VSA

C.

MSA 2042

D.

Storevirtual VSA

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.

How should you connect the switch to the network?

A.

Configure multiple user IDs or roles for the console connection

B.

Configure the management IP address on the switch and enable Telnet or SSH access

C.

Use a dedicated console cable to create a dedicated management network for every user

D.

Connect the switch to the network by using the serial cable that ships with the switch

A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.

Which HPE solution meets this customer’s requirements?

A.

HPE Nimble Storage

B.

HPE SimpliVity

C.

HPE MSA

D.

HPE StoreVirtual VSA

A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.

Which component addresses these issues?

A.

Converged network adapter

B.

Dual-port 10 GbE FlexLOM

C.

Dynamic Smart Array controller

D.

Fibre Channel host bus adapter

You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

A.

Room temperature must not exceed 35 °C (95 °F)

B.

Rack tie kit should be installed on the rack for proper airflow

C.

UPSs should be installed at the top of the rack for top mounted power feed

D.

There must be at least a 10 cm (4 in) clearance space at the front and back of the components within the racks

E.

Rack doors must be unlocked for easy component removal and maintenance

You are configuring an internal Smart Array controller on an HPE ProLiant server.

Which statement is true regarding the drives in the logical array?

A.

HDDs and SSDs cannot be mixed in the same logical array.

B.

SATA HDDs and SAS SSDs can be mixed in the same logical array.

C.

SAS HDDs and SATA HDDs can be mixed in the same logical array.

D.

SATA SSDs and SATA HDDs can be mixed in the same logical array.