Weekend Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: xmas50

HP HPE0-V14 - Building HPE Hybrid IT Solutions (Rev. 19.41)

HP HPE0-V14 Premium Access     Download Demo    
Page: 8 / 9
Total 303 questions

A customer requires a storage platform for their department data. They have a limited budget and will be sharing files among their Microsoft Windows environment.

Which HPE storage platform meets the customer’s needs?

A.

Nimble

B.

StoreOnce

C.

3PAR StoreServ

D.

StoreEasy

A customer requests a quote for an HPE storage solution that meets the following requirements

• Fully redundant dual-controller storage array with no single points of failure

• 10GD iscsi connectivity

• At least four host-facing iscsi ports

• Guaranteed 6-nmes data availability

Which HPE storage solution should you propose?

A.

HPE Primer 630

B.

HPE Nimble storage HF20

C.

HPE D3000

D.

HPE Nimble storage AF40 dHCi

You are installing a server solution in a customer’s data center.

How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

A.

Use a single-phase, two-wire power receptacle with protective earth or ground (PE) to filter interference from the power grid

B.

Do not allow the overall system AC current load to exceed 80% of the branch circuit AC current rating

C.

Use fanout cables when connecting the server to the network for maximum electrical impedance

D.

Balance the server power load between available AC supply branch circuits

E.

Configure the server power to a single electrical circuit in the data center

Match the storage technology to the storage type.

You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do you need to use?

A.

OneView Standard

B.

Smart Storage Administrator

C.

Central Management Console

D.

Library & Tape Tools

You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%.

Which action should you take first?

A.

Update all system firmware

B.

Replace all cooling fans

C.

Reseat drive blanks

D.

Unplug all but one cooling fan

You are installing a rack at customer site.

How can you ensure redundant power to the rack?

A.

Install two power distribution units (PDUs) with each one connected to a power socket supplied by an independent electrical power source.

B.

Ensure 3-phase power is available in the data center.

C.

Connect an uninterruptible power supply (UPS) to redundant circuit breakers at the facility power source.

D.

Use two different power cords to connect the server to the power grid at the customer site.

A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.

Which troubleshooting steps should you prioritize? (Choose two.)

A.

Use Smart Storage Administrator (SSA) to view the STATS report on the MSA

B.

Use NIC teaming utility to validate the iSCSI initiator configuration

C.

Use remote console to check the switch port configuration

D.

Use remote console to validate the WWNs on the MSA

E.

Use remote console to ensure correct MSA port configuration

You are provisioning a new virtual disk group on a MSA storage system.

Which disk group parameters must you specify when creating the vdisk? (Choose three.)

A.

RAID level

B.

LUN number

C.

type

D.

cache size

E.

name

F.

volume size

A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.

Which drive type meets the customer’s needs?

A.

Mixed-use SSD

B.

SAS midline

C.

Read-intensive SSD

D.

SATA nearline