Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: ecus65

HP HPE6-A72 - Aruba Certified Switching Associate Exam

HP HPE6-A72 Premium Access     Download Demo    
Page: 1 / 4
Total 105 questions

You have completed a successful VSF stack between two switches.

Without manually assigning a backup switch, what is the expected output when issuing a show vsf command?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?

A.

copy running-config checkpoint startup-config

B.

copy startup-config running-config

C.

copy running-config initial-checkpoint

D.

copy running-config default

Refer to the exhibit.

What VSF command produces the above output?

A.

show vsf member

B.

show vsf link

C.

show vsf topology

D.

show vsf detail

What is Deep Packet Inspection?

A.

a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign

B.

a concept that applies to firewalls, when examining packets only up through Layer 4

C.

a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address

D.

a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied

Refer to the exhibit.

What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the commandshow ip interface briefin the exhibit below?

A.

Access-1(config)# interface 1/1/1

Access-1(config-if)# routing

Access-1(config-if)# interface vlan 100

Access-1(config-if-vlan)# ip address 10.1.1.1/24

B.

Access-1(config)# interface 1/1/1

Access-1(config-if)# vlan trunk permit vlan 100

Access-1(config-if)# interface vlan 100

Access-1(config-if-vlan)# ip address static 10.1.1.1/24

C.

Access-1(config)# interface vlan 100

Access-1(config-if-vlan)# ip address 10.1.1.1/24

D.

Access-1(config-if)# vlan 100

Access-1(config-vlan)# ip address 10.1.1.1/24

Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)

A.

Local

B.

EIGRP

C.

BGP

D.

ISIS

E.

RIPng

Refer to the exhibit.

Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.

Which configuration will correct the issue?

A.

Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

B.

Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

C.

Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1

D.

Host-B: assign the default-gateway address 10.1.20.181

Click on the colored box that corresponds with the line that best represents Multicast traffic flow.

Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.

What is a valid configuration for Access-2 to join the VSF stack?

A.

Access-2# configure

Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

B.

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

C.

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

D.

Access-2# configure

Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

Access-2(config)# vsf renumber-to 2

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)

A.

SNMPv2c

B.

HTTPS

C.

USB-C console

D.

Telnet

E.

SSH