ISTQB ISTQB-CTFL - ISTQB Certified Tester Foundation Level (CTFL v4.0)

Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be applied to both input and output values. Based on the given requirement, we can identify two input values: age and weekend. Age should be an integer of 0 or above, and weekend means Friday to Sunday inclusive. The following statement is not correct:

A) Thursday is a valid input boundary value. This statement is not correct, as Thursday is not a boundary value for the input weekend. The boundary values for the input weekend are Friday and Sunday, as they are at the edge of the equivalence partition that represents weekend days. The following statements are correct:

B) A minimum of 6 valid test cases are derived from boundary value analysis based on input age. This statement is correct, as we can derive six valid test cases based on input age by using the minimum and maximum values for each equivalence partition defined by the requirement. The equivalence partitions for input age are: under 7 (0 to 6), 7 to 13 inclusive (7 to 13), and greater than 65 (66 and above). The minimum and maximum values for each partition are: 0 and 6, 7 and 13, and 66 and any value above it.

C) $3.01 is a valid output boundary value. This statement is correct, as $3.01 is a boundary value for the output additional fee. The additional fee can have four possible values depending on the input age: $0 (for visitors aged under 7), $2.40 (for visitors aged 7 to 13 inclusive with a 20% discount), $1.50 (for visitors aged greater than 65 with a 50% discount), and $3 (for visitors aged between 14 and 65). The boundary values for the output additional fee are $0 and $3, as they are at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Therefore, $3.01 is a valid output boundary value, as it is at the smallest incremental distance above $3.

D) 7 and 13 are boundary values for the equivalence partition including age 10. This statement is correct, as 7 and 13 are boundary values for the equivalence partition that represents visitors aged 7 to 13 inclusive. This partition includes age 10, which is an internal value within the partition. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 37-38.

Testers are typically involved in creating detailed test execution schedules, among other tasks such as designing tests, executing tests, and logging defects. Creating a test strategy and test policy, promoting and advocating the test team, and introducing metrics are typically responsibilities of test managers or senior roles.

In the ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, the responsibilities of testers include creating test cases, setting up test​(ISTQB not-for-profit association)​nts, executing tests, and reporting defects, which align with creating detailed test execution schedules【6†source】.

References:

Certified Tester Foundation Level v4.0

ISTQB Foundation Level Syllabus 4.0 (2023)

In software testing, risks are categorized into product risks and project risks. Product risks are associated with the potential of a product to fail in meeting its quality criteria. Project risks are related to potential issues that could affect the project's ability to deliver a product.

[i] is a project risk because it concerns the availability and adequacy of hardware resources for performance testing.

[ii] is a product risk because it pertains to a security and functionality issue within the web application.

[iii] is a project risk because it involves the availability of necessary requirements documentation for the testing process.

[iv] is a product risk because it relates to the system's functionality and data integrity after a failure.

Thus, statement A correctly classifies [ii] and [iv] as product risks and [i] and [iii] as project risks​​.

Comprehensive and Detailed In-Depth Explanation:The primary objectives of testing, as outlined in the ISTQB CTFL v4.0 syllabus, include verifying whether specified requirements are met (A), detecting failures and defects (B), and validating that the test object functions as expected (D). However, "finding errors" (C) is not a direct objective. Errors result from human mistakes, but testing primarily identifies defects, which are flaws in the system that cause failures. Testing aims to reveal defects rather than directly identify errors in the code.

The correct statement is B. According to the ISTQB CTFL syllabus, the testing quadrants help to categorize tests based on their purpose and whether they are technology-facing or business-facing, and whether they support the team or critique the product. Quadrant Q2 includes tests that are business-facing and support the team, such as automated acceptance tests produced during Behavior-Driven Development (BDD) and Acceptance Test-Driven Development (ATDD)​​ .

Quadrant Q3 includes business-facing tests that critique the product, such as exploratory testing, usability testing, and user acceptance testing. These tests are typically manual and focus on evaluating the product from a user perspective, rather than being part of a continuous integration process​​.

Quadrant Q4 includes technology-facing tests that critique the product, such as performance tests, security tests, and other non-functional tests, which can be automated but are not related to unit tests produced during TDD .

In defect reporting, the attribute that indicates the degree of impact that the defect has on the system is the severity. Severity reflects the seriousness of the defect in terms of its impact on the operation of the system, ranging from minor issues that do not significantly affect the system's functionality to critical defects that can cause system failure. Therefore, option B is the correct answer​​.

Covering all transitions at least once is the highest coverage criterion for state transition based test cases, because it ensures that every possible change of state is tested at least once. This means that all the events that trigger the transitions, as well as the actions and outputs that result from the transitions, are verified. Covering all transitions at least once also implies covering all states at least once, but not vice versa. Therefore, option D is not the highest coverage criterion. Option C is the lowest coverage criterion, because it only tests the initial and final states of the system or component, without checking the intermediate states or transitions. Option A is incorrect, because the coverage criteria for state transition based test cases can be determined and compared based on the number of transitions and states covered. References = CTFL 4.0 Syllabus, Section 4.2.3, page 49-50.

A formal review is a type of review that follows a defined process with formal entry and exit criteria and roles and responsibilities for participants. A formal review can have various roles involved, such as manager, moderator, author, reviewer and scribe. The manager responsibilities in formal review include all except one of the following:

Planning the review (correct responsibility)

Determines if the review objectives have been met (incorrect responsibility)

Decide on the execution of reviews (correct responsibility)

Allocate time for review (correct responsibility) The responsibility of determining if the review objectives have been met belongs to the moderator role, not to themanager role. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 3, page 28-29.

Static analysis tools are software tools that examine the source code of a program without executing it. They can detect various types of issues, such as syntax errors, coding standards violations, security vulnerabilities, and potential bugs12. However, static analysis tools cannot identify issues that depend on the runtime behavior or performance of the program, such as very low MTBF (Mean Time Between failure)3. MTBF is a measure of the reliability of a system or component. It is calculated by dividing the total operating time by the number of failures. MTBF reflects how often a system or component fails during its expected lifetime. Static analysis tools cannot measure MTBF because they do not run the program or observe its failures. MTBF can only be estimated by dynamic testing, which involves executing the program under various conditions and collecting data on its failures4. Therefore, very low MTBF is an issue that cannot be identified by static analysis tools. The other options, such as potentially endless loops, referencing a variable with an undefined value, and security vulnerabilities, are issues that can be identified by static analysis tools. Static analysis tools can detect potentially endless loops by analyzing the control flow and data flow of the program and checking for conditions that may never become false5. Static analysis toolscan detect referencing a variable with an undefined value by checking the scope and initialization of variables and reporting any use of uninitialized variables6. Static analysis tools can detect security vulnerabilities by checking for common patterns of insecure code, such as buffer overflows, SQL injections, cross-site scripting, and weak encryption. References = What Is Static Analysis? Static Code Analysis Tools - Perforce Software, How Static Code Analysis Works | Perforce, Static Code Analysis: Techniques, Top 5 Benefits & 3 Challenges, What is MTBF? Mean Time Between Failures Explained | Perforce, Static analysis tools - Software Testing MCQs - CareerRide, ISTQB_Chapter3| Quizizz, [Static Code Analysis for Security Vulnerabilities | Perforce].

In Agile teams, close collaboration among testers and other team members can lead to organizational risks such as: ii. Close interaction with developers causes a loss of the appropriate tester mindset. iv. Testers, once they have acquired technical development or business skills, leave the testing team.

These risks highlight the potential issues of diminished testing perspective and team turnover when testers integrate closely with developers and other roles​​.