ISTQB ISTQB-CTFL - ISTQB Certified Tester Foundation Level (CTFL v4.0)

One possible risk of introducing test automation is that the selected tool may not be fit-for-purpose. This means that the tool might not meet the specific needs and requirements of the project, leading to inefficiencies and possibly failing to provide the expected benefits. It is crucial to evaluate and select the appropriate tool based on the project's context and objectives. The ISTQB CTFL syllabus highlights the importance of careful tool evaluation and selection to ensure it aligns with the testing goals and the development environment.

The test engineer should re-run the tests, in order to ensure that new defects have not been introduced by the fix. This is also known as regression testing, which is a type of testing that verifies that previously tested software still performs correctly after a change. Regression testing helps to detect any side effects or unintended consequences of a fix or a modification. The other options are incorrect reasons for re-running the tests. The test engineer should not re-run the tests, as they have already been run, and results recorded, because this ignores the possibility of new defects caused by the fix. The test engineer should not re-run the tests, they should be part of the developer tests, because this assumes that developer tests are sufficient and reliable, which may not be true. The test engineer should not re-run the tests, because the defect shows that the test cases need to be updated, because this does not address the impact of the fix on other test cases or functionalities. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 41.

Comprehensive and Detailed In-Depth Explanation:

Different test levels (unit, integration, system, acceptance) have specific objectives while sometimes overlapping to ensure comprehensive testing (D). Option A contradicts shift-left principles, B encourages late testing (which is ineffective), and C incorrectly assumes that all development activities require direct test actions.

Comprehensive and Detailed In-Depth Explanation:

State transition testing validates valid and invalid state transitions based on defined rules.

D is invalid because it transitions from DIAGNOSTIC MODE directly to EMERGENCY MODE, which is not a valid state change in most systems.

Other options follow valid sequences according to state transition rules.

Test exit criteria are the conditions or requirements that must be met before testing can be concluded. Test exit criteria are usually defined in the test plan and agreed by the stakeholders. Test exit criteria can be based on various factors, such as test coverage, defect status, quality level, risk level, etc. Test schedules would be the least likely to be used as the basis for test exit criteria, because test schedules are not directly related to the quality or performance of the software product, but rather to the time or resources allocated for testing. Test schedules can be used as the basis for test entry criteria, which are the conditions or requirements that must be met before testing can start. The other options are more likely to be used as the basis for test exit criteria. Cost of testing performed so far can be used as a basis for test exit criteria, because it can indicate the return on investment or the cost-benefit ratio of testing. Confidence of testers in tested code can be used as a basis for test exit criteria, because it can reflect the level of satisfaction or assurance of the testers about the quality or reliability of the software product. Number of unfixed defects can be used as a basis for test exit criteria, because it can indicate the level of risk or impact of the remaining defects on the software product. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 13.

Achieving full code coverage does not guarantee that the component or system is fully tested or free of defects. Code coverage metrics indicate the extent to which the source code has been tested, but they do not account for the quality of the tests or whether all possible scenarios have been considered. Other types of testing, including functional, performance, and security testing, are necessary to ensure comprehensive testing. The ISTQB CTFL Syllabus v4.0 highlights that while high code coverage is beneficial, it does not equate to complete testing​​.

A correct list of boundary values for the P input should include the minimum and maximum values of the valid range (15 and 350), as well as the values just below and above the boundaries (14 and 351). Boundary value analysis is a test design technique that involves testing the values at or near the boundaries of an input domain or output range, as these values are more likely to cause errors than values in the middle. Option B satisfies this condition, as it has all four boundary values (14, 15, 350, 351). Option A has only two boundary values (14 and 351), option C has only two boundary values (15 and 350), and option D has no boundary values at all. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 34.

Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be applied to both input and output values. Based on the given requirement, we can identify two input values: age and weekend. Age should be an integer of 0 or above, and weekend means Friday to Sunday inclusive. The following statement is not correct:

A) Thursday is a valid input boundary value. This statement is not correct, as Thursday is not a boundary value for the input weekend. The boundary values for the input weekend are Friday and Sunday, as they are at the edge of the equivalence partition that represents weekend days. The following statements are correct:

B) A minimum of 6 valid test cases are derived from boundary value analysis based on input age. This statement is correct, as we can derive six valid test cases based on input age by using the minimum and maximum values for each equivalence partition defined by the requirement. The equivalence partitions for input age are: under 7 (0 to 6), 7 to 13 inclusive (7 to 13), and greater than 65 (66 and above). The minimum and maximum values for each partition are: 0 and 6, 7 and 13, and 66 and any value above it.

C) $3.01 is a valid output boundary value. This statement is correct, as $3.01 is a boundary value for the output additional fee. The additional fee can have four possible values depending on the input age: $0 (for visitors aged under 7), $2.40 (for visitors aged 7 to 13 inclusive with a 20% discount), $1.50 (for visitors aged greater than 65 with a 50% discount), and $3 (for visitors aged between 14 and 65). The boundary values for the output additional fee are $0 and $3, as they are at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Therefore, $3.01 is a valid output boundary value, as it is at the smallest incremental distance above $3.

D) 7 and 13 are boundary values for the equivalence partition including age 10. This statement is correct, as 7 and 13 are boundary values for the equivalence partition that represents visitors aged 7 to 13 inclusive. This partition includes age 10, which is an internal value within the partition. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 37-38.

Data migration testing is a critical part of maintenance testing during the decommissioning of a system. When a system is decommissioned, data often needs to be transferred to another system or archived securely. This process ensures that the data remains intact, accessible, and secure in its new location. Therefore, statement B is true as it aligns with the ISTQB CTFL syllabus guidelines on handling system decommissioning and data preservation​​.