USGBC LEED-Green-Associate - LEED Green Associate GAFRE Exam (LEED GA)

According to LEED guidelines:

“Integrated Project Delivery phases: Pre-Design, Design, Bidding, Commissioning, Occupancy”

Commissioning aligns with these project phases for quality assurance and system verification.

The Materials and Resources (MR) category focuses on reducing the environmental, economic, and social impacts of building materials from extraction to disposal12. It encourages the use of materials that have lower embodied energy, less waste, more recycled content, and better life-cycle performance12.

LEED v4: Building Design + Construction Guide - U.S. Green Building Council1

Credit’s Supporting LEED’s Materials and Resources Category | Legrand2

Shielded light fixtures are designed to direct light downwards and prevent it from spilling over into areas where it’s not wanted, such as beyond the project boundary. This helps to prevent light trespass, which can be a form of pollution that disrupts ecosystems and human sleep patterns. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Adaptive reuse focuses on repurposing existing materials or elements to reduce construction waste and resource use. Reusing wood floors as wall panels exemplifies this principle, aligning with LEED credits under Materials and Resources​​.

The Green Business Certification Inc. (GBCI) reviews and provides the final LEED certification report to projects. GBCI was established in 2008 as a separately incorporated entity with the support of the U.S. Green Building Council (USGBC). GBCI administers project certifications for LEED and other green business certification programs. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The conventional building process stages can vary depending on the type, size, and complexity of the project, but a general overview can be found in this article. According to the article, the stages are:

Planning: This is the stage where the project idea is conceived, the feasibility and budget are assessed, the design and engineering are developed, the permits and approvals are obtained, and the contractors and subcontractors are hired. This stage involves various disciplined practitioners on project teams, such as architects, engineers, surveyors, estimators, project managers, and lawyers.

Sitework and foundation: This is the stage where the project site is prepared, the utilities are connected, the excavation and grading are done, and the foundation is laid. This stage involves mainly civil engineers, site workers, foundation contractors, and building inspectors.

Rough framing: This is the stage where the structural components of the building are erected, such as walls, floors, roofs, stairs, and windows. This stage involves mainly carpenters, framers, roofers, and window installers.

Exterior construction: This is the stage where the exterior finishes of the building are applied, such as siding, brickwork, stucco, insulation, doors, and landscaping. This stage involves mainly exterior contractors, painters, landscapers, and door installers.

MEP (Mechanical, Electrical, Plumbing): This is the stage where the mechanical systems of the building are installed and tested, such as heating, ventilation, air conditioning (HVAC), plumbing, electrical wiring, lighting fixtures, fire alarms, and security systems. This stage involves mainly mechanical engineers, electricians, plumbers, HVAC technicians, and fire protection specialists.

Finishes and fixtures: This is the final stage where the interior finishes of the building are applied, such as drywall, flooring, cabinets, countertops, appliances, furniture, and accessories. This stage involves mainly interior designers, drywallers, flooring installers, cabinet makers, countertop installers, appliance installers, and furniture movers.

As you can see from this overview, each disciplined practitioner on project teams is involved in different stages of the conventional buildingprocess, depending on their expertise and role. However, they are also required to collaborate and coordinate with each other throughout the design process, which spans from the planning stage to the finishes and fixtures stage. The design process is an iterative and interactive process that involves creating, reviewing, and refining the design plans and specifications to meet the project goals and requirements1. Therefore, the answer is D. As required during design process.

Building a House Step by Step: A Guide From Start to Finish

What Is Disciplined Agile? - Project Management Institute

The Facilities Manager is typically responsible for ensuring the comfort and safety of a building’s occupants. They would be best equipped to evaluate responses to a survey about comfort levels in the building and develop a corrective action plan to address any problems identified. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The feedback mechanism is a process of collecting and analyzing data from the building occupants to evaluate the performance of the building and identify opportunities for improvement1. Occupants are the primary source of feedback, as they are the ones who experience the building on a daily basis and can provide valuable insights on its comfort, functionality, and satisfaction2.

References := LEED v4: Building Design + Construction Guide, Feedback Mechanism - LEEDuser

This is the correct order of the LEED certification process for most projects1. The first step is to register the project on LEED Online and pay the registration fee2. The second step is to prepare the application by collecting and uploading the required information and documents according to the chosen rating system and credits2. The third step is to submit the application and pay the certification fee2. The fourth step is to undergo the application review by a LEED accredited third party, which may request clarifications or corrections2. The final step is to receive the certification decision and the LEED plaque and certificate2.

Life-cycle cost analysts of a new construction includes consideration of

cost of purchasing window glazing

cost of adding accessible parking

cost of challenging a real estate tax assessment

cost of subsidizing the use of public transportation

Answer: A

Life-cycle cost analysis (LCCA) is a method for assessing the total cost of owning a facility or running a project. It considers all the costs associated with obtaining, owning, and disposing of an investment1. The cost of purchasing window glazing is one of the initial costs that affects the energy performance and thermal comfort of a building2. Therefore, it is included in the LCCA of a new construction.

https://www.usgbc.org/credentials/leed-green-associate