USGBC LEED-Green-Associate - LEED Green Associate GAFRE Exam (LEED GA)

The Energy and Atmosphere (EA) category addresses the energy performance, efficiency, and renewable sources of buildings. One of the credits in this category is EA Credit: Enhanced Refrigerant Management, which aims to reduce the emissions of ozone-depleting substances and greenhouse gases from refrigeration and air-conditioning equipment. Refrigerants are substances that are used to transfer heat in cooling systems. Some refrigerants have high global warming potential (GWP) and ozone depletion potential (ODP), which means they can contribute to climate change and damage the ozone layer if they leak or are improperly disposed of. Enhanced refrigerant management involves selecting refrigerants with low GWP and ODP, minimizing refrigerant charge size, and preventing or detecting leaks12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

Including subsidies for carpools is a strategy that can increase the number of points the project receives for Location and Transportation credits. This is because it reduces the demand for single-occupancy vehicle trips and parking spaces, which in turn reduces greenhouse gas emissions, traffic congestion, and land consumption12. The project can earn up to 15 points for the Transportation Demand Management credit by providing various incentives and programs to encourage alternative modes of transportation, such as carpooling, public transit, biking, or walking12.

LEED Building Design and Construction: Homes is the rating system that applies to single-family homes, low-rise multi-family homes, and mid-rise multi-family homes1. It includes the ability to reduce point thresholds for LEED certification levels based on building size, as smaller homes tend to have lower environmental impacts than larger homes2. The point thresholds are determined by the size of the house compared to the number of bedrooms1.

 2 LEED v4: Building Design + Construction Guide, Homes, p. 171 The LEED rating system - Ecohome.

Using double-glazed windows with an air gap is the best answer because the question asks how to reduce transmission of exterior noise into interior spaces. Double glazing and air space between panes improve the envelope’s acoustic separation and can also improve energy performance compared with single glazing. In LEED Indoor Environmental Quality, acoustics are important because excessive noise can reduce comfort, privacy, concentration, and productivity. Quiet zones near the core may help planning, but they do not directly improve the exterior façade’s sound isolation. White noise machines may mask noise inside a space, but they do not stop highway noise from entering. Increasing hard interior surfaces can worsen reverberation and acoustic discomfort. A well-designed envelope is the most direct solution.

Indoor Environmental Quality is the correct LEED credit category. This category addresses the conditions that occupants experience inside a building, including indoor air quality, thermal comfort, lighting quality, daylight, views, acoustics, low-emitting materials, and control of indoor pollutants. The goal is to support occupant health, comfort, satisfaction, and productivity. Indoor Air Quality is an important part of Indoor Environmental Quality, but it is not the full LEED category name. Indoor Energy Quality and Indoor Efficiency Quality are not LEED credit categories. For the LEED Green Associate exam, it is important to distinguish the official category name from related concepts. EQ is broader than air quality alone because it includes comfort, lighting, acoustics, and overall occupant experience.

Increasing the amount of ventilation in an occupied space affects the Indoor Environmental Quality credit category. Ventilation is the process of supplying fresh outdoor air and removing stale indoor air from a building. Ventilation can improve the indoor environmental quality by diluting or removing indoor pollutants, such as carbon dioxide, volatile organic compounds, or particulate matter, and enhancing the thermal comfort and well-being of the occupants. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “increase ventilation rates” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Ventilation | U.S. Department of Energy]

Waste that is transported or diverted to landfills can have negative impacts on the environment, such as occupying valuable land, contaminating soil and water, and emitting harmful gases. One of the most significant impacts is the production of methane, a potent greenhouse gas that contributes to global warming and climate change. Methane is generated when organic waste decomposes anaerobically (without oxygen) in landfills. Methane has a global warming potential 28 times higher than carbon dioxide over a 100-year period12. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Landfill Methane Outreach Program2

A strategy for preventing light pollution is to install shielded fixtures. Light pollution is the excessive or inappropriate use of artificial lighting that can have adverse effects on human health, wildlife, ecosystems, and astronomy. Shielded fixtures are lighting devices that direct light downward and prevent light from escaping upward or sideways. Shielded fixtures can reduce light pollution by minimizing glare, sky glow, light trespass, and energy waste13. References: LEED v4 Green Associate Candidate Handbook1, International Dark-Sky Association’s Lighting Basics3