Black Friday Rush: 75% Off All Exam Bundles! Apply the coupon code below before the offer expires! - Ends in 0d 00h 00m 00s - Coupon code: newyear

WatchGuard Network-Security-Essentials - Network Security Essentials for Locally-Managed Fireboxes

What type of NAT enables clients on a private network to connect to servers on the Internet? (Select one.)

A.

Static NAT

B.

Dynamic NAT

C.

NAT loopback

D.

Hairpin NAT

When you migrate a configuration file from one Firebox to a new Firebox, which settings transfer to the new device? (Select two.)

A.

Management users

B.

Certificates

C.

Policies

D.

DNS servers

E.

Feature key

You configured email notifications in WatchGuard Cloud for your Firebox Device Alarms and want to receive an email when your users download any .exe files through an HTTP proxy. You must enable what type of log message in the Firebox configuration? (Select one.)

A.

Allowed traffic logs for the HTTP proxy policy

B.

Alarm logs for the EXE/DLL Body Content rule in the HTTP proxy

C.

Diagnostic logs for Gateway AntiVirus

D.

Alarm logs for when a virus is detected in the HTTP proxy

E.

Denied traffic logs for the HTTP proxy policy

Your users have no network connectivity on their computers in the 10.0.40.0/24 network. You investigate and discover the DHCP address pool for this network is exhausted, but there are no available IP addresses in the network to assign. Which of these options can you use to expand the IP address space of this network? (Select two.)

A.

Change the IP address of the 10.0.40.1/24 network to 10.0.40.123/24

B.

Enable a wireless SSID for the 10.0.40.1/24 network

C.

Add 10.0.50.1/24 to the 10.0.40.1/24 network as a secondary network

D.

Create a Dynamic NAT rule for traffic from the 10.0.40.1/24 network going to the 10.0.50.1/24 network

E.

Bridge the 10.0.40.1/24 network across additional interfaces

When you configure a Branch Office VPN tunnel to a third-party device, AES-GCM encryption is recommended for:

A.

Better performance and throughput when supported by both VPN endpoints

B.

Troubleshooting purposes

C.

Better uptime because of additional keep-alive options

D.

Routing over a BOVPN

E.

Connections to third-party firewalls only

You configured your Firebox as a DHCP server and want to verify the status of the leased addresses. You found this information in Firebox System Manager > Status Report. What is true about DHCP leases in this deployment? (Select two.)

DHCP Leases Log Extract:

lease 10.20.1.100 {

interface vlan20;

starts 4 2023/03/09 21:42:25;

ends 4 2023/03/09 22:42:25;

binding state active;

hardware ethernet 00:50:56:9a:75:d0;

client-hostname "Laptop1";

}

Summary for 10.20.1.0/24: 1 out of 51 IPs are leased

lease 10.0.1.2 {

interface eth1;

starts 4 2023/03/09 21:42:33;

ends 5 2023/03/10 05:42:33;

binding state active;

hardware ethernet 00:50:56:b6:22:9f;

client-hostname "Server1";

}

Summary for 10.0.1.0/24: 1 out of 253 IPs are leased

Summary for all: 2 out of 304 IPs are leased

A.

The MAC address for the host using 10.0.1.2 is 00:50:56:9a:75

B.

DHCP leases for the 10.0.1.0/24 network are valid for 8 hours

C.

DHCP leases for the 10.20.1.0/24 network are valid for 24 hours

D.

252 IP addresses are currently available in the address pool for the 10.0.1.0/24 network

E.

The hostname Server1 is associated with the IP address 10.20.1.100

There is an Internet outage at your primary ISP, but the Internet connection from the Firebox has not failed over to your backup ISP. Both ISP connectors are correctly cabled and have active physical links. What could cause this problem? (Select two.)

A.

Link Monitor target for the backup ISP interface is not responding

B.

The Link Monitor target for the primary ISP interface is set to ping the default gateway, but the outage is further upstream

C.

The secondary IP addresses are not defined for the backup ISP interface

D.

In the Multi-WAN settings, the Immediate Fallback option is enabled

E.

In the Multi-WAN settings, the Gradual Fallback option is enabled

You have an existing network infrastructure built out that uses tagged and untagged VLAN networks. Based on the diagram below, which VLANs must you add to the Firebox interface? (Select one.)

A.

VLAN 10 Untagged and VLAN 20 Untagged

B.

VLAN 10 Tagged and VLAN 20 Tagged

C.

VLAN 10 Untagged and VLAN 20 Tagged

D.

VLAN 10 Tagged and VLAN 20 Untagged

E.

VLAN 10 Untagged, VLAN 10 Tagged, and VLAN 20 Tagged

You have five public IP addresses available from your ISP. When you create a Static NAT action, you want to specify one of the public IP addresses for inbound traffic but do not see it in the IP address drop-down list. How can you change the Firebox configuration to see additional public IP addresses in the Static NAT action? (Select one.)

A.

Add secondary IP addresses to the external interface

B.

Configure 1-to-1 NAT for your entire subnet

C.

Add the public IP addresses to the From field of the policy that uses the Static NAT action

D.

Enable the Set Source IP option in the policy

E.

Add the IP addresses to the Dynamic NAT configuration

You bought a new Firebox and want to use the configuration from an existing Firebox you already configured. The best way to migrate the configuration is to restore a backup image from the existing Firebox to the new Firebox, then add the new feature key.

A.

True

B.

False