CompTIA PT0-002 - CompTIA PenTest+ Certification Exam

The gateway for the network (192.168.1.1) is at 0a:d1:fa:b1:01:67, and then, another machine (192.168.1.136) also claims to be on the same MAC address. With this on the same network, intermittent connectivity will be inevitable as along as the gateway remains unreachable on the IP known by the others machines on the network, and given that the new machine claiming to be the gateway has not been configured to route traffic.

The output shows an ARP table that contains entries for IP addresses and their corresponding MAC addresses on a local network interface (en0). ARP stands for Address Resolution Protocol and is used to map IP addresses to MAC addresses on a network. However, one entry in the table is suspicious:

? (192.168.1.136) at 0a:d1:fa:b1:01:67 on en0 ifscope [ethernet]

This entry has the same MAC address as another entry:

? (192.168.1.1) at 0a:d1:fa:b1:01:67 on en0 ifscope [ethernet]

This indicates that a device on the network has poisoned the ARP cache by sending false ARP replies that associate its MAC address with multiple IP addresses, including 192.168.1.136 and 192.168.1.1 (which is likely the gateway address). This allows the device to intercept or redirect traffic intended for those IP addresses.

Open-source research and traffic sniffing are two activities that have a minimal chance of detection, as they do not involve sending any packets or requests to the target network or system. Open-source research is the process of gathering information from publicly available sources, such as websites, social media, blogs, forums, etc. Traffic sniffing is the process of capturing and analyzing network packets that are transmitted over a shared medium, such as wireless or Ethernet.

since vlan hopping requires 2 vlans to be nested in a single packet. Double tagging occurs when an attacker adds and modifies tags on an Ethernet frame to allow the sending of packets through any VLAN. This attack takes advantage of how many switches process tags. Most switches will only remove the outer tag and forward the frame to all native VLAN ports. With that said, this exploit is only successful if the attacker belongs to the native VLAN of the trunk link. https://cybersecurity.att.com/blogs/security-essentials/vlan-hopping-and-mitigation

Tag nesting is a technique that involves inserting two VLAN tags into an Ethernet frame to bypass VLAN hopping prevention mechanisms. The first tag is stripped by the first switch, and the second tag is processed by the second switch, allowing the frame to reach a different VLAN than intended. RFID cloning is a technique that involves copying the data from an RFID tag to another tag or device. RFID tagging is a technique that involves attaching an RFID tag to an object or person for identification or tracking purposes. Meta tagging is a technique that involves adding metadata to web pages or files for search engine optimization or classification purposes.

Fraggle attack is same as a Smurf attack but rather than ICMP, UDP protocol is used. The prevention of these attacks is almost identical to Fraggle attack.

Ref: https://www.okta.com/identity-101/fraggle-attack/

A01-Injection

A02-Broken Authentication

A03-Sensitive Data Exposure

A04-XXE

A05-Broken Access Control

A06-Security Misconfiguration

A07-XSS

A08-Insecure Deserialization

A09-Using Components with Known Vulnerabilities

A10-Insufficient Logging & Monitoring

PS/PA/PU/PY are host discovery flags which use TCP SYN/ACK, UDP or SCTP discovery respectively. And since the ports in the options are mostly used by TCP protocols, then it's either the PS or PA flag. But since we need to know if the ports are live, sending SYN packet is a better alternative. Hence, I choose PS in this case.

The nmap –PS22-25,80 192.168.1.1-5 command will return vulnerable ports that might be interesting to a potential attacker, as it will perform a TCP SYN scan on ports 22, 23, 24, 25, and 80 of the target hosts. A TCP SYN scan is a stealthy technique that sends a SYN packet to each port and waits for a response. If the response is a SYN/ACK packet, it means the port is open and listening for connections. If the response is a RST packet, it means the port is closed and not accepting connections. If there is no response, it means the port is filtered by a firewall or IDS1.

According to the CompTIA PenTest+ Study Guide, Exam PT0-0021, a statement of work (SOW) is a document that defines the scope, objectives, deliverables, and terms of a penetration testing project. It is a formal agreement between the service provider and the client that specifies what is expected from both parties, including the timeline, budget, resources, and responsibilities. A SOW is essential for any penetration testing engagement, as it helps to avoid misunderstandings, conflicts, and legal issues.

The CompTIA PenTest+ Study Guide also provides an example of a SOW template that covers the following sections1:

Project overview: A brief summary of the project’s purpose, scope, objectives, and deliverables.

Project scope: A detailed description of the target system, network, or application that will be tested, including the boundaries, exclusions, and assumptions.

Project objectives: A clear statement of the expected outcomes and benefits of the project, such as identifying vulnerabilities, improving security posture, or complying with regulations.

Project deliverables: A list of the tangible products or services that will be provided by the service provider to the client, such as reports, recommendations, or remediation plans.

Project timeline: A schedule of the project’s milestones and deadlines, such as kickoff meeting, testing phase, reporting phase, or closure meeting.

Project budget: A breakdown of the project’s costs and expenses, such as labor hours, travel expenses, tools, or licenses.

Project resources: A specification of the project’s human and technical resources, such as team members, roles, responsibilities, skills, or equipment.

Project terms and conditions: A statement of the project’s legal and contractual aspects, such as confidentiality, liability, warranty, or dispute resolution.

The CompTIA PenTest+ Study Guide also explains why having a SOW is important before starting an assessment1:

It establishes a clear and mutual understanding of the project’s scope and expectations between the service provider and the client.

It provides a basis for measuring the project’s progress and performance against the agreed-upon objectives and deliverables.

It protects both parties from potential risks or disputes that may arise during or after the project.