CompTIA SK0-005 - CompTIA Server+ Certification Exam

The output of the configuration shows that RAID 5 was configured properly using four 200GB drives. The approximate volume size of 400GB is correct, since RAID 5 uses one disk for parity and the rest for data. Therefore, the usable storage capacity is three-fourths of the total capacity, which is 600GB out of 800GB. The other RAID levels given would result in different volume sizes: RAID 0 would result in 800GB, RAID 1 would result in 200GB, and JBOD would result in an error since it does not support multiple drives in a single volume.References:https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5

Kerberos is a network authentication protocol that uses tickets to allow clients and servers to prove their identity to each other. Kerberos relies on accurate time synchronization between the parties involved, as the tickets have expiration dates and timestamps. If the system clock of a Linux server is off by more than five minutes from the LDAP server or the domain controller, the Kerberos authentication will fail and generate errors. A local firewall is unlikely to block authentication requests if the server can communicate over the network and is configured correctly. The users’ passwords are not relevant if theyare known-working LDAP credentials. The server has access to the LDAP host if it can communicate over the network and is configured correctly. References:

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/identity_management_guide/kerberos_errors

https://www.ibm.com/docs/en/aix/7.2?topic=authentication-kerberos-time-synchronization

JBOD (Just a Bunch Of Disks) is a storage configuration that combines different types and sizes of hard drives into one logical unit without any RAID level or redundancy. It allows users to see all the drives within the unit as one large storage space.JBOD can utilize all the available capacity of the drives but does not provide any performance or fault tolerance benefits. Verified References: [JBOD], [RAID]

A synthetic full backup is a type of backup that combines a full backup with one or more incremental backups to create a new full backup without accessing the source data. This type of backup is suitable for database servers, as it reduces the backup window, minimizes the impact on the server performance, and provides faster recovery time. Verified References: [Synthetic Full Backup]

DLP (Data Loss Prevention) is a security measure that prevents unauthorized copying, transferring, or leaking of sensitive data from a server or a network. It can block or alert the user when they try to copy a file to certain locations, such as a network share or a USB flash drive, based on predefined policies and rules. Verified References: [DLP], [Data loss]

RAID (Redundant Array of Independent Disks) is a technology that combines multiple hard drives into a logical unit that provides improved performance, reliability, or capacity. RAID can be implemented by hardware, software, or a combination of both. Hardware RAID uses a dedicated controller to manage the RAID array, while software RAID uses the operating system or a driver to do the same1.

In this scenario, the technician noted that the RAID hard drives were functional while troubleshooting a motherboard failure. This means that the data on the drives was not corrupted or lost. However, the technician installed a spare motherboard with similar specifications and used the original components. This means that the new motherboard may not have the same RAID configuration as the old one, or it may not recognize the existing RAID array at all. Therefore, the technician needs to reconfigure the RAID in order to restore operations with minimal downtime.

Alerts are notifications that inform the technician or the team of any issues or events that occur on a server or a network. Alerts can be configured to trigger based on certain thresholds, such as CPU usage, disk space, memory utilization, or response time. Alerts can help the technician monitor and troubleshoot the server performance in real time. Verified References: [Alerts], [Server performance]

The most likely cause of this issue is that the UEFI boot was interrupted by a missing Linux boot file. UEFI (Unified Extensible Firmware Interface) is a standard that defines the interface and functionality of the firmware that initializes the hardware and software components of a system before loading the operating system. UEFI boot is a process that uses UEFI firmware to load and execute a boot loader, which is a program that loads the operating system kernel and other essential files. A Linux boot file is a file that contains information and instructions for the boot loader, such as the location of the kernel, the root file system, and the boot parameters. If a Linux boot file is missing or corrupted, the boot loader cannot find or load the kernel, and the system stops during the boot process with a blank screen and an f prompt.

Disabling unneeded physical ports would prevent unauthorized devices from being connected to the server, such as an outside USB drive. Setting a BIOS password would restrict access to the boot settings and prevent unauthorized changes to the boot order. The other options would not address the risk of booting from an outside USB drive

This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs.References:https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L3-intervlanrouting.html