CompTIA SK0-005 - CompTIA Server+ Certification Exam

The most likely cause of the internet issue is B. The DHCP scope is full.

A DHCP scope is a range of IP addresses that a DHCP server can assign to DHCP clients on a network. A DHCP scope has a start address and an end address, and it can also have some excluded addresses that are not available for lease. A DHCP scope can have various options, such as subnet mask, default gateway, DNS server, etc., that are applied to the DHCP clients along with the IP address. A DHCP scope also has a lease time, which is the duration that a DHCP client can use an IP address before renewing it or releasing it. A DHCP scope can have reservations, which are fixed IP addresses that are assignedto specific DHCP clients based on their MAC addresses12

If a DHCP scope is full, it means that there are no more IP addresses available for lease in the scope. This can happen if the number of DHCP clients exceeds the number of IP addresses in the scope, or if the lease time is too long and the IP addresses are not released or reused frequently enough. If a DHCP scope is full, any new or existing DHCP clients that request an IP address from the DHCP server will not receive one, and they will not be able to access the network or the internet12

In this scenario, users are able to connect to the wireless network, but they are unable to access the internet. The network administrator verifies connectivity to all network devices, and there are no ISP outages. The server administrator removes the old address leases from the active leases pool, which allows users to access the internet. This indicates that the DHCP scope is full, and that removing the old leases frees up some IP addresses for lease in the scope. Therefore, option B is the most likely cause of the internet issue.

Before donating the outdated server equipment to a local charity, the organization should review all company policies regarding data security, asset disposal, and social responsibility. This can help ensure that the donation complies with the legal and ethical standards of the organization and does not pose any risk to its reputation or operations. Verified References: [Data security], [Asset disposal], [Social responsibility]

1U stands for one unit and it is a standard unit of measurement for rack-mounted servers. It is equal to 1.75 inches (4.45 cm) in height. A 42U rack can accommodate 42 1U servers or a combination of servers with different unit sizes. Therefore, the unit size per server should be 1U if there are 19 1U servers in a 42U rack.References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 1.2)

The organization should retrieve the tapes from the cold site and test them to ensure they are properly maintained and usable during a DR scenario. A cold site is a location that has space and power for backup equipment, but no actual equipment installed or configured. The organization stores backup tapes of its servers at cold sites as a precaution in case of a disaster that affects its primary site. However, backup tapes can degrade over time due to environmental factors such as temperature, humidity, dust, or magnetic fields. Therefore, the organization should periodically retrieve the tapes from the cold site and test them on compatible equipment to verify their integrity and readability.

Retention policies are the guidelines that dictate when to delete data backups based on operational or compliance needs. They specify how long, how, where, and in what format the data backups are stored, and who has authority over them. The other options are not directly related to the deletion of data backups.

https://backup.ninja/news/Database-Backups-101-Backup-Retention-Policy-Considerations

RAID 10 is the RAID level that will yield the best combination of available space and redundancy when configuring a new server for use as a database server with two mirrored drives for the operating system and three drive bays remaining for storage. RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved. RAID 10 provides high performance, fault tolerance, and fast recovery, but it reduces storage capacity by half. RAID 0 is a RAID configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 1 is a RAID configuration that duplicatesdata across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 5 is a RAID configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive’s worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. References: https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/

A S.M.A.R.T. error is an indication of a potential failure of a hard drive. S.M.A.R.T. stands for Self-Monitoring, Analysis and Reporting Technology and it is a feature that monitors the health and performance of hard drives. A hard drive test can help diagnose the issue and determine if the drive needs to be replaced.References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 1.1)

The HCL stands for Hardware Compatibility List and it is a list of hardware devices that are tested and certified to work with a specific operating system. If a network card is not on the HCL for the OS, it may not function properly or cause compatibility issues. Therefore, verifying the network card is on the HCL for the OS should be the next step to troubleshoot this issue.References: https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 4.1)

Blanking panels are metal or plastic plates that are installed in the empty spaces of a rack to prevent hot air from recirculating back to the front of the rack. This can improve the airflow and cooling efficiency of the rack and reduce the heat generated by the servers. Verified References: [Blanking panel], [Rack cooling]

Increasing IOPS (input/output operations per second) by implementing flash storage is the most likely solution to resolve a slowdown issue in the storage subsystem of a database server. Flash storage uses solid-state drives (SSDs) that have faster read/write speeds and lower latency than traditional hard disk drives (HDDs). This can improve the performance of database queries and transactions. Implementing deduplication, extending capacity, or reformatting the disk as FAT32 are not likely to resolve the issue, as they do not affect the IOPS of the storage subsystem. References: [CompTIA Server+ Certification Exam Objectives], Domain 3.0: Storage, Objective 3.5: Summarize hardware and features of various storage technologies.