Brocade 170-010 - Brocade Certified vRouter Engineer

Data is being transmitted from host A to host B.

If you were to view a frame at the point indicated in the exhibit, what would the source MAC address be?

What information does a router need to add an entry to its routing table? (Choose two.)

When you enable OSPF protocol monitoring, where is the protocol data stored?

A user has read-write access to a Brocade Vyatta vRouter.

Which two commands will display the current device configuration? (Choose two.)

You want to configure a backup static route for a route learned through OSPF.

What is the lowest value you can use for administrative distance for this to work?

Your device is about to transmit a packet from host 10.1.1.1 to destination 172.16.22.33.

What will be the source address after the packet is transmitted?

vyatta@training:~$ show system commit

0 2013-05-03 21:07:54 by root via boot-config-loader

1 2013-05-03 00:05:32 by vyatta via cli

2 2013-05-02 23:15:23 by vyatta via cli

3 2013-04-08 17:57:48 by root via boot-config-loader

4 2013-03-12 18:08:45 by vyatta via cli

5 2013-01-22 22:56:04 by vyatta via cli

6 2012-11-04 02:36:36 by root via boot-config-loader

7 2012-10-12 16:15:36 by vyatta via cli

8 2012-10-11 16:23:08 by vyatta via cli

9 2012-09-10 18:51:06 by vyatta via cli

10 2012-09-04 23:56:28 by vyatta via cli

11 2012-08-31 23:25:35 by vyatta via cli

12 2012-08-31 23:08:05 by vyatta via cli

13 2012-08-31 23:07:32 by vyatta via cli

14 2012-08-31 23:06:56 by vyatta via cli

15 2012-08-31 03:38:53 by vyatta via cli

16 2012-08-31 03:37:15 by vyatta via cli

17 2012-08-31 03:03:53 by vyatta via cli

18 2012-06-22 04:58:47 by vyatta via cli

19 2012-06-20 19:48:08 by vyatta via cli

vyatta@training:~$

Based on the output, which two statements about this Brocade Vyatta vRouter are true? (Choose two.)

You are running a Brocade Vyatta vRouter as a virtual machine, and the upgrade system image command tells you that you must perform a manual upgrade.

Which three steps are part of the manual upgrade process? (Choose three.)

vyatta@vyatta:~$ show dhcp server leases

IP address Hardware Address Lease expiration Pool Client Name

---------- ---------------- ---------------- ---- -----------

10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20 ClientLAN

10.224.7.41 d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34

vyatta@vyatta:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface IP Address S/L Description

--------- ---------- --- -----------

eth0 192.168.200.254/24 u/u

eth1 192.168.100.1/24 u/u

eth2 10.224.7.1/25 u/u

eth3 172.24.42.1/24 u/u

lo 127.0.0.1/8 u/u

::1/128

Based on the output shown, which statement is true?