SAP C_TS414_2023 - SAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management

In SAP S/4HANA QM, the item of a quality notification (transaction QM01) can reference specific objects:

Material (A): Materials are a standard object category, linking the notification to a specific material number (e.g., in the "Reference Object" section).

Batch (C): Batches (LO-BM) can be assigned to track batch-specific issues, a common QM feature.

Serial Number (E): Serial numbers (e.g., for equipment or materials) are supported to pinpoint individual units, especially in industries like electronics.

Delivery Item (B): Delivery items are referenced in SD notifications but not directly assigned as objects in the item structure in standard QM.

Purchase Order Item (D): POs are reference documents, not directly assignable objects in the notification item.

Thus, "Material," "Batch," and "Serial number" are the correct answers.References: SAP Help Portal - "Reference Objects in Quality Notifications"; SAP S/4HANA QM User Guide - "Notification Items".

Control charts in SAP QM (e.g., during results recording, transaction QGC1) monitor characteristic values against statistical limits. Rejection is based on:

Action Limit (D): The action limit (upper/lower control limit, UCL/LCL) is the threshold beyond which a characteristic is rejected, indicating a process is out of control. In Customizing (SPRO > Quality Management > Quality Inspection > SPC > Define Control Charts), exceeding this limit triggers rejection or further action (e.g., defect recording).

Warning Limit (A): Warning limits (e.g., 2-sigma) signal potential issues but don’t automatically reject the characteristic; they prompt monitoring, not rejection.

Moving Average Line (B): This tracks trends but isn’t a rejection threshold.

Center Line (C): The center line (mean) is a reference, not a limit for rejection.

Thus, "Action limit" is the correct answer, aligning with SPC rejection rules.References: SAP Help Portal - "Statistical Process Control in QM"; SAP S/4HANA QM User Guide - "Control Charts".

The catalog profile in the material master determines the set of codes available for quality processes like defect recording or usage decisions. Its assignment occurs at a specific organizational level:

Plant Level (D): In the material master (transaction MM01/MM02), the catalog profile is assigned in the Quality Management view under the "Inspection Setup" section (field QMAT-PROF). This is done at the plant level because QM processes (e.g., inspections) are plant-specific, and the catalog profile must align with the plant’s quality requirements. This is standard SAP behavior, ensuring flexibility across different plants for the same material.

Company Code Level (A): QM settings are not managed at the company code level, as this is a financial organizational unit unrelated to inspection processes.

Client Level (B): Client-level settings are too broad and apply globally, whereas catalog profiles need plant-specific granularity.

Business Area Level (C): Business areas are used for financial reporting, not QM organizational assignments.

Thus, "Plant level" is the correct answer, reflecting SAP’s organizational structure for QM data.References: SAP Help Portal - "Material Master in QM"; SAP S/4HANA QM User Guide - "QM View in Material Master".

The clean core dashboard in SAP S/4HANA monitors system adherence to clean core principles:

Customers Can Use the Dashboard in the Dev, Test, and Production Tenants (B): The dashboard is available across all system tenants (development, test, production) to assess clean core status universally.

It Can Be Accessed by Using SAP For Me (C): SAP For Me (customer portal) provides access to the clean core dashboard, a standard entry point as of 2025.

Customers Can Grant Access to Partners (A): Partner access isn’t a standard feature; it’s customer-controlled.

It Can Be Used in All SAP S/4HANA Cloud Editions (D): Primarily for Cloud Private Edition and Public Cloud, not guaranteed for all editions (e.g., on-premise specifics vary).

Thus, "Customers can use the dashboard in the dev, test, and production tenants" and "It can be accessed by using SAP For Me" are the correct answers.References: SAP Help Portal - "Clean Core Dashboard"; SAP S/4HANA Cloud User Guide - "SAP For Me".

Creating a new inspection type in SAP QM (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Types) requires:

Assign a Task List Type to the New Inspection Type (A): The inspection type (e.g., custom Z01) must be linked to a task list type (e.g., Q for inspection plans) to define the inspection scope, a mandatory step.

Assign the New Inspection Type to a Predefined Inspection Lot Origin (C): The type must be assigned to an inspection lot origin (e.g., 01 for GR) to determine when lots are created, a required configuration.

Assign the New Inspection Type to a Number Range (B): Number ranges are assigned to origins, not directly to types, so this is optional.

Define Default Values for the New Inspection Type (D): Defaults (e.g., UD settings) are optional enhancements, not mandatory.

Thus, "Assign a task list type to the new inspection type" and "Assign the new inspection type to a predefined inspection lot origin" are the correct answers.References: SAP Help Portal - "Customizing Inspection Types"; SAP S/4HANA QM Customizing Guide - "Inspection Lot Creation".

For a "Complaint Against Supplier" notification (e.g., type Q2, transaction QM01):

Material Document (B): Material documents (e.g., goods receipt via MIGO) are standard references, linking the complaint to a specific receipt event (SPRO > QM > Quality Notifications > Notification Creation).

Purchasing Document (C): Purchase orders (e.g., from ME21N) are commonly referenced to tie the complaint to the supplier’s delivery or order.

WBS Element (A): Work Breakdown Structure elements are PS-related, not standard for supplier complaints.

QM Order (D): QM orders track costs but aren’t reference documents for notification creation.

Thus, "Material document" and "Purchasing document" are the correct answers.References: SAP Help Portal - "Reference Documents for Supplier Complaints"; SAP S/4HANA QM User Guide - "Notification Creation".

During results recording (e.g., transaction QE51N), additional characteristics can be added to an operation:

Master Inspection Characteristics as Complete Copy Model (B): MICs (transaction QS21) can be added as a complete copy, inheriting all attributes (e.g., tolerances, sampling) for immediate use in the lot.

Master Inspection Characteristics as Incomplete Copy Model (C): MICs can be added as an incomplete copy, allowing customization (e.g., adjusting tolerances) during recording, a flexible option in SAP QM.

Master Inspection Characteristics as Reference Characteristic (A): Reference MICs are linked for reuse but not added anew during recording; they’re predefined in the plan.

Class Characteristics from the Classification System (D): Class characteristics (transaction CT04) are for batch classification, not inspection recording.

Thus, "Master inspection characteristics as complete copy model" and "Master inspection characteristics as incomplete copy model" are the correct answers.References: SAP Help Portal - "Adding Characteristics in Results Recording"; SAP S/4HANA QM User Guide - "Inspection Results".

Certificate profiles in SAP QM (transaction QC01) define the data included in outgoing quality certificates. The characteristic categories allowed are:

Master Inspection Characteristic (A): MICs (transaction QS21) are used in inspection plans and material specs, and their results can be included in certificate profiles to report quality data (e.g., measured values).

Class Characteristic (B): Class characteristics (from the Classification System, transaction CT04) are linked to batches or materials and can be included in certificate profiles to display classification data (e.g., batch properties).

Inspection Characteristic (C): This term refers to characteristics in an inspection lot/plan but is not a distinct category; it’s covered by MICs, so it’s not separately selectable.

Process Instruction Characteristic (D): Used in Process Industries (PI) for production, not applicable to QM certificate profiles in standard SAP.

Thus, "Master inspection characteristic" and "Class characteristic" are the correct answers.References: SAP Help Portal - "Quality Certificates - Certificate Profiles"; SAP S/4HANA QM User Guide - "Outgoing Certificates".

To record inspection results for an inspection lot (e.g., transaction QE51N):

The Sample Determination Has Been Performed for the Inspection Lot (A): The lot must have its sample size calculated (status "SAMP" or "INSP") based on the sampling procedure, a prerequisite for result entry (SPRO > QM > Quality Inspection > Sample Management).

The Inspection Operations Are Released for Inspection Results Recording (B): Operations in the inspection plan must be released (status REL) to allow result recording, ensuring the lot is ready (transaction QP01).

The Inspection Methods Are Part of the Inspection Specifications (C): Methods guide execution but aren’t a condition for recording.

The Inspection Specifications Have Been Assigned to the Inspection Lot (D): Specs (e.g., material specs) are linked implicitly via the plan, not a separate condition.

Thus, "The sample determination has been performed for the inspection lot" and "The inspection operations are released for inspection results recording" are the correct answers.References: SAP Help Portal - "Prerequisites for Results Recording"; SAP S/4HANA QM User Guide - "Inspection Lot Processing".