CompTIA N10-009 - CompTIA Network+ Certification Exam

VXLAN (Virtual Extensible LAN) encapsulates Ethernet frames inside UDP packets, increasing packet size. This can lead to fragmentation and performance degradation unless Jumbo Frames are enabled.

Breakdown of Options:

A. 802.1Q tagging – VLAN tagging enables segmentation but does not address fragmentation issues.

B. Spanning tree – STP prevents loops but does not improve performance for VXLAN traffic.

C. Link aggregation – LACP combines links for higher bandwidth but does not prevent fragmentation.

D. Jumbo frames – Correct answer. Enabling Jumbo Frames allows larger packet sizes, reducing fragmentation and improving VXLAN performance.

When signal strength is poor, mobile devices constantly boost their transmission power in an attempt to maintain a stable connection. This results in dropped calls/data and rapid battery drain. Since a repeater was installed, misalignment or misconfiguration could be degrading the signal strength.

A. WPS applies to Wi-Fi, not cellular repeaters.

C. Channel frequency might matter for interference, but signal strength is the most direct cause of the described symptoms.

D. Power budget applies to PoE and wired devices, not mobile phones.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — Wireless/cellular troubleshooting, signal strength impact, user symptoms (battery drain, poor connectivity).

Understanding MTBF:

Mean Time Between Failures (MTBF): A reliability metric that estimates the average time between successive failures of a device or system.

Calculation and Importance:

Calculation: MTBF is calculated as the total operational time divided by the number of failures during that period.

Usage: Used by manufacturers and engineers to predict the lifespan and reliability of a device, helping in maintenance planning and lifecycle management.

Comparison with Other Metrics:

RTO (Recovery Time Objective): The maximum acceptable time to restore a system after a failure.

RPO (Recovery Point Objective): The maximum acceptable amount of data loss measured in time.

MTTR (Mean Time to Repair): The average time required to repair a device or system and return it to operational status.

Application:

MTBF is crucial for planning maintenance schedules, spare parts inventory, and improving the overall reliability of systems.

Comprehensive and Detailed Explanation (paraphrased, aligned to N10-009):

A proxy server (specifically a caching HTTP/HTTPS proxy) stores frequently accessed web objects and serves them locally to clients, reducing external bandwidth consumption and improving response times.

B. Load balancer distributes traffic across servers but does not inherently cache internet content.

C. Open relay is a misconfigured mail server that permits unauthorized relaying—this is a security issue, not a caching solution.

D. Code repository (e.g., for source control) isn’t related to web content caching.

References (CompTIA Network+ N10-009):

Domain: Network Standards, Protocols, and Implementations — Application-layer services (HTTP/HTTPS), proxies and caching behavior, performance optimization.

===========

Definition of Fiber Connector Types:

LC (Lucent Connector): A small form-factor fiber optic connector with a push-pull latching mechanism, commonly used for high-density applications.

SC (Subscriber Connector or Standard Connector): A larger form-factor connector with a push-pull latching mechanism, often used in datacom and telecom applications.

ST (Straight Tip): A bayonet-style connector, typically used in multimode fiber optic networks.

MPO (Multi-fiber Push On): A connector designed to support multiple fibers (typically 12 or 24 fibers), used in high-density cabling environments.

Common Usage:

LC Connectors: Due to their small size, LC connectors are widely used in network interface cards (NICs) and high-density environments such as data centers. They allow for more connections in a smaller space compared to SC and ST connectors.

SC and ST Connectors: These are larger and more commonly used in patch panels and older fiber installations but are less suitable for high-density applications.

MPO Connectors: Primarily used for trunk cables in data centers and high-density applications but not typically on individual network interface cards.

Selection Criteria:

The small form-factor and high-density capabilities of LC connectors make them the preferred choice for network interface cards, where space and connection density are critical considerations.

The most common protocol for secure VPNs is IPsec (Internet Protocol Security). IPsec provides confidentiality, integrity, and authentication for VPN traffic, typically using ESP (Encapsulating Security Payload). It is used in both site-to-site and remote access VPNs.

B. GRE encapsulates traffic but does not provide encryption.

C. BGP is a routing protocol, not a VPN technology.

D. SSH can be used for secure tunneling but is not the standard for VPN deployment.

IPsec is the industry standard because it operates at Layer 3, securing IP traffic regardless of the application, making it highly versatile.

References (CompTIA Network+ N10-009):

Domain: Network Security — VPN protocols, IPsec, ESP.